High modulus of isotactic polypropylene attained by coextrusion with atactic polystyrene

Orientation-induced crystallization of crystallizable polymer melts can occur, under certain conditions, during flow through converging channels. Attempts have been made to achieve this phenomenon in a two-phase system, i.e., during simultaneous extrusion of a continuous concentric core of polypropylene within a polystyrene matrix through a conical duct. On one occasion, using Carlona P SY6100 (MFI = 11.0) with Hostyren N2000-V-01 (MFI = 25.0), a highly oriented polypropylene thread with a modulus of 14.6 GPa and a melting point of 178°C was extruded at a die temperature of approximately 170°C and a pressure lower than 40 MPa. It is, in principle, possible to form highly oriented, fiber-like structures as reinforcing elements in a polymer matrix.     

Temperature effects on the mass flow rate in the SBI and similar heat‐release rate test equipment

In various medium‐to‐large‐scale fire test equipments like the ISO room corner test (RC), and more recently, the single burning item test (SBI) the mass flow rate measurement of the combustion gases plays a key role in the determination of the heat‐release rate and smoke‐production rate. With the knowledge of the velocity profile and the temperature of the flow, the mass flow rate is obtained by measuring the velocity on the axis of the duct. This is done by means of a bi‐directional probe based on the pitot principle. However, due to the variation of the mean temperature and the temperature gradient in any cross section of the duct, introduced by ever changing combustion gas temperatures, the velocity nor the density profile are constant in time. This paper examines the resulting uncertainty on the mass flow rate. Copyright © 2006 John Wiley & Sons, Ltd.     

The Construction of Minimal DNA Expressions

We describe a formal language/notation for DNA molecules that may contain nicks and gaps. The elements of the language, DNA expressions, denote formal DNA molecules. Different DNA expressions may denote the same formal DNA molecule. We analyse the shortest DNA expressions denoting a given formal DNA molecule. We determine lower bounds on their lengths and explain how we construct these minimal DNA expressions.     

Microprocessor testability

As the level of microprocessor complexity increases to several hundred thousand transistors for a single-chip machine, it is becoming very difficult to test commercially available designs to the level of fault coverage desired by some customers. In order to achieve near 100-percent coverage of single stuck-at faults, future microprocessors must be designed with special testing features (designed for testability). The authors describe the testing problem for microprocessors, including the various methods of generating test sets and their application by the user. A survey of the testability features of some of today's commercially available microprocessors is presented. Suggestions for testability features for future-generation microprocessors are also discussed     

IPv6 delay and loss performance evolution

Although packet delay and loss are two important parameters of the Internet performance, to the best of our knowledge, the evolution of large‐scale IPv6 delay and loss performance has previously not been studied. In this paper, we analyze more than 600 end‐to‐end IPv6 paths between about 26 testboxes of RIPE Network Coordination Centre over two years, and compare the delay and loss performance over time with their IPv4 counterparts. We present and discuss the measurement methodologies and show that IPv6 paths have a higher delay and loss than their IPv4 counterparts. The main reason for the worse performance stems from IPv6‐in‐IPv4 tunnels rather than from native IPv6 paths and such tunnels are still widely used today. Copyright © 2007 John Wiley & Sons, Ltd.     

Influence of Production Process Parameters on Fish Oil Quality in a Pilot Plant

ABSTRACT: A pilot plant used for upgrading herring byproducts into fish oil was analyzed on its operational efficiency and product quality. The temperature of the heat exchanger and the speeds of the pump and the 3-phase decanter were varied according to a 2³ fractional factorial design. The initial amount of oxidation products present in the crude oil, its storage stability, and the yields from the different obtained products were determined. Multivariate data analysis of the advanced screening stage showed that T had neither influence on the quality nor on the yield in contrast to D and MP (P < 0.05). Process optimization results showed that the quality of the oil was influenced by an interaction effect between the speed of the MP and the D. Oils processed with the highest MP speed were the most stable during storage.     

Photonic Demodulator With Sensitivity Control

A current assisted photonic demodulator for use as a pixel in a 3-D time-of-flight imager shows nearly 100% static demodulator contrast and is operable beyond 30 MHz. An integrated tunable sensitivity control is also presented for increasing the distance measurement range and avoiding unwanted saturation during integration periods. This is achieved by application of a voltage on a dedicated drain tap showing a quenching of sensor sensitivity to below 1%     

Thermoelectric Converters of Human Warmth for Self-Powered Wireless Sensor Nodes

Solar cells are the most commonly used devices in customer products to achieve power autonomy. This paper discusses a complementary approach to provide power autonomy to devices on a human body, i.e., thermoelectric conversion of human heat. In indoor applications, thermoelectric converters on the skin can provide more power per square centimeter than solar cells, particularly in adverse illumination conditions. Moreover, they work day and night. The first sensor nodes powered by human heat have been demonstrated and tested on people in 2004-2005. They used the state-of-the-art 100-muW watch-size thermoelectric wrist generators fabricated at IMEC and based on custom-design small-size BiTe thermopiles. The sensor node is completed with a power conditioning module, a microcontroller, and a wireless transceiver mounted on a watchstrap     

Systems that Should Have Failed: Critical Infrastructure Protection in an Institutionally Fragmented Environment

Recent years have witnessed major governmental initiatives regarding critical infrastructure protection (CIP). During that same time, critical infrastructures (CIs) have undergone massive institutional restructuring under the headings of privatization, deregulation and liberalization. Little research has gone into understanding the interactions between these two developments. In this article, we outline the consequences of institutional restructuring for the changing ways in which CIs ensure the reliability and security of their networks and services. Neither Normal Accident Theory nor High‐Reliability Theory can account for reliability under these conditions. We then investigate the implications of these findings for CIP.     

A single-grain approach applied to the modeling of recrystallization kinetics for cold-rolled single-phase metals

A comprehensive model for the recrystallization kinetics is proposed which incorporates both microstructure and the textural components in the deformed state. The model is based on the single-grain approach proposed previously. The influence of the as-deformed grain orientation, which affects the stored energy via subgrain size and sub-boundary misorientation, is taken into account. The effects of the deformed grain geometry, the nucleation-site density, and the initial grain size prior to deformation on the recrystallization kinetics are assessed. The model is applied to the recrystallization kinetics of a cold-rolled AA1050 alloy.