Activation of glassy carbon electrodes by photocatalytic pretreatment

This paper describes a simple and rapid photocatalytic pretreatment procedure that removes contaminants from glassy carbon (GC) surfaces. The effectiveness of TiO₂ mediated photocatalytic pretreatment procedure was compared to commonly used alumina polishing procedure. Cyclic voltammetric and chronocoulometric measurements were carried out to assess the changes in electrode reactivity by using four redox systems. Electrochemical measurements obtained on photocatalytically treated GC electrodes showed a more active surface relative to polished GC. In cyclic voltammograms of epinephrine, Fe(CN)₆^3−/4− and ferrocene redox systems, higher oxidation and reduction currents were observed. The heterogeneous electron transfer rate constants (k^o) were calculated for Fe(CN)₆^3−/4− and ferrocene which were greater for photocatalytic pretreatment. Chronocoulometry was performed in order to find the amount of adsorbed methylene blue onto the electrode and was calculated as 0.34 pmol cm⁻² for photocatalytically pretreated GC. The proposed photocatalytic GC electrode cleansing and activating pretreatment procedure was more effective than classical alumina polishing.     

Dynamic tensile and shear storage moduli of PEG/silica-polymorph composites

The effect of silica polymorphs on the thermomechanical properties of 0, 5, 10, and 20 wt % silica particles-reinforced-based poly(ethylene glycol) (PEG) composites have been studied as a function of temperature using dynamic mechanical analysis (DMA). The silica polymorphs exhibited quartz (Q), cristobalite (C), and amorphous (A) phases, which were obtained by processing natural silica sand. The DMA thermomechanical properties were determined in tensile (E) and shear (G) modes. The maximum storage moduli (E′ and G′) were achieved by samples with 20 wt % silica for all type of fillers. These values increased approximately 12 times for PEG/Q, 10 times for PEG/A, and 11 times for PEG/C composites compared to the pure PEG. Furthermore, the Poisson's ratio values of the composites were filler phase dependent, that is, 0.39–0.47 for PEG/Q, 0.15–0.18 for PEG/A, and somewhat anomalous for PEG/C composites. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47372.     

Synthesis of Schiff base–containing benzoxazine derivatives

The excellent chemical and physical properties of benzoxazine resins and the functionality of Schiff bases were combined in one compound's structure, creating newly designed benzoxazine derivatives that can form complexes with metals. The new type of benzoxazine monomer was synthesized via the ring-closure reaction of formaldehyde, aniline, and three newly designed Schiff bases. The presence of the Schiff base in the molecular structure of these novel benzoxazine monomers enables them to trap metals as the functional compounds, like Cu, from a solution. Thermally initiated polymerization occurs at a lower temperature by the formation of intermolecular and intramolecular hydrogen bonds between imine, oxazine, Schiff base hydroxyl groups, and the newly generated hydroxyl groups. The thermal behavior of the bisbenzoxazine monomers was investigated with Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and differential scanning calorimetry, and then they were cured at 120, 180, and 230°C. According to the magnetic susceptibility, FTIR, scanning electron microscopy with energy dispersive X-ray spectroscopy, TGA, and microwave plasma atomic emission spectroscopy results, it is shown that Cu(II) complexes of the compounds were also succesfully synthesized, and they proved to be successful in catching metal. This is due to the functionality of Schiff bases forming the metal complexation in the compounds. The poly(bisbenzoxazine)s also showed high limiting oxygen index (31–37), low ring-opening temperature (150–190°C), high char yield (35%–49%), and excellent thermal stability, due to the highly crosslinked nature of the polymers. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47908.     

Dry Fractionation Approach in Concentrating Tocopherols and Tocotrienols from Palm Fatty Acid Distillate: A Green Pretreatment Process for Vitamin E Extraction

Palm fatty acid distillate (PFAD) is a rich source of vitamin E. As compared to other vegetable oil, PFAD has higher tocotrienol (70–80%) over tocopherol content, which makes it a valuable source for vitamin E extraction. Current vitamin E extraction methods are not sustainable due to the intensive usage of chemical and high operational cost. Hence, the present study investigated for the first time using dry fractionation process as a green and economical pretreatment method for separating solid fraction (stearin) and liquid fraction (olein) in order to concentrate vitamin E from PFAD in olein fraction. We examined the dry fractionation conditions: crystallization ending temperature (36–44 °C), cooling rate (0.3 and 1.5°C min⁻¹), stirring speed (20–125 rpm), and holding time (0–60 min) on the composition of unsaturated and saturated fatty acids as well as vitamin E content in liquid fraction (olein) and solid fraction (stearin) using gas chromatography and high performance liquid chromatography, respectively. In most of these conditions, vitamin E was ultimately higher in olein fraction as compared to stearin fraction, which is correlated with the high degree of unsaturation. Under a cooling rate of 0.3°C min⁻¹, 90 rpm stirring speed, and ending crystallization of 38 °C, the highest vitamin E rich olein fraction was attained with 1479 ± 10.51 ppm in 50 g olein fraction as compared to 1366 ± 7.94 ppm in 500 g of unfractionated PFAD.     

Effect of heat moisture treatment on resistant starch content among carbohydrate sources: a meta-analysis

Resistant starch (RS) can be generated through heat moisture treatment (HMT). The HMT was conducted by modifying starch using different ratio of moisture content, high temperature and heating time. A number of studies showed that the effects of HMT on RS contents in cereals, pulses, tubers and fruits were inconsistent. This study aimed to analyse the impact of HMT on RS level in various carbohydrate sources through a meta-analysis approach. Study selection was conducted with the PRISMA method. There were 21 relevant studies and 67 data used for meta-analysis. The database was analysed by using Hedges’ d. The results showed that there was a significant impact of HMT on RS level of cereals, especially wheat. The highest increase in RS levels for various carbohydrate sources in starch was influenced by the interaction of treatment between water content at 15 ≤ x < 25%, heating time at 0.25 < x ≤ 6 h and temperature at 120 ≤ x ≤ 130 °C.     

Physical,microstructure and leaching assessments for pavement road base containing mixed steel slag and cathode ray tube glass

Clean Technologies and Environmental Policy - Use of by-product materials, such as steel slag and cathode ray tube glass, as alternative recycled materials in the construction of roads, could...