N ‐acetylcysteine–PLGA nano‐conjugate: effects on cellular toxicity and uptake of gadopentate dimeglumine

Gadolinium as a contrast agent in MRI technique combined with DTPA causes contrast induced nephropathy (CIN) and nephrogenic systemic fibrosis (NSF) which can reduce by usage of antioxidants such as N‐acetyl cysteine by increasing the membrane''s permeability leads to lower cytotoxicity. In this study, N ‐acetyl cysteine‐PLGA Nano‐conjugate was synthesized according to stoichiometric rules of molar ratios andafter assessment by FTIR, NMR spectroscopy and Atomic Force Microscopy (AFM) imaging was combined with Magnevist® (gadopentetate dimeglumine) and its effects on the renal cells were evaluated. MTT [3‐(4,5‐Dimethylthiazol‐2‐yl)‐2,5‐Diphenyltetrazolium Bromide] and cellular uptake assays have indicated relatively significant toxicity of magnevist (P  < 0.05) on three cell lines including HEK293, MCF7 and L929 compared to other synthesized ligands that shown no toxicity. Moreover, systemic evaluation has shown no notable changes of blood urea nitrogen (BUN) and creatinine in kidney of mice. In consequence, antioxidant effect was increased as well as the renal toxicity of the contrast agent reduced at the cell level. As a result, PLGA‐NAC nano‐conjugate can be a promising choice for decreasing the magnevist toxicity for treatment and prevention of CIN and will be able to open a new horizon to research on reduction of toxicity of contrast agents by using nanoparticles.Inspec keywords: blood, toxicology, nanofabrication, cellular biophysics, biomedical materials, nanoparticles, chromatography, cancer, biodegradable materials, biomedical MRI, kidney, pH, nanomedicine, patient treatment, diseases, atomic force microscopy, Fourier transform infrared spectraOther keywords: cellular toxicity, gadopentate dimeglumine, contrast agent, magnetic resonance imaging technique, diethylenetriamine pentaacetate, contrast‐induced nephropathy, nephrogenic systemic fibrosis, stoichiometric rules, molar ratios, dimethyl sulphoxide solution, chromatography techniques, nuclear magnetic resonance spectroscopy, atomic force microscopy imaging, Magnevist®, gadopentetate dimeglumine, renal cells, MTT cytotoxicity, human embryonic kidney‐293, L929 cell lines, in vitro conditions, cellular uptake assays, Magnevist uptake, antioxidant effect, renal toxicity, cell level, PLGA nanocarrier, acetylcysteine nanoconjugate, Magnevist toxicity, N‐acetylcysteine–PLGA nano‐conjugate, N‐acetyl cysteine‐poly‐lactic‐co‐glycolic acid nanoconjugate     

A hybrid data envelopment analysis and multi-attribute decision making approach to sustainability assessment

The concept of sustainability consists of three main dimensions: environmental, techno-economic, and social. Measuring the sustainability status of a system or technology is a significant challenge, especially when it needs to consider a large number of attributes in each dimension of sustainability. In this study, we first propose a hybrid approach, involving data envelopment analysis (DEA) and a multi-attribute decision making (MADM) methodologies, for computing an index for each dimension of sustainability, and then we define the overall sustainability index as the mean of the three measured indexes. Towards this end, we define new concepts of efficiency and cross-efficiency of order (p, q) where p and q are the number of inputs and outputs, respectively. For a given (p, q) , we address the problem of finding efficiency of order (p, q) by developing a novel DEA-based selecting method. Finally, we define the sustainability index as a weighted sum of all possible cross-efficiencies of order (p, q) . Form a computational viewpoint, the proposed selecting model significantly decreases the computational burden in comparison with the successive solving of traditional DEA models. A case study of the electricity-generation technologies in the United Kingdom is taken as a real-world example to illustrate the potential application of our method.     

Multiple human 3D pose estimation from multiview images

Multimedia Tools and Applications - Multiple human 3D pose estimation is a challenging task. It is mainly because of large variations in the scale and pose of humans, fast motions, multiple persons...     

Mineralogical and sink-float studies of Jajarm low-grade bauxite

Jajarm's bauxite deposits are mainly diasporic,and they have a low mass ratio of Al2O3/SiO2. It is necessary to increase the run-of-mine mass ratio before feeding the material to the Bayer process. Chemical analysis indicated that the low-grade bauxite sample from Jajarm contained 43.9wt% Al2O3 and 13.35wt% SiO2, resulting in a mass ratio of 3.29. According to mineralogical studies, the presence of aluminosilicate minerals such as kaolinite, illite, and quartz was the main reason for the decrease of the mas...     

Preparation of silica-decorated graphene oxide nanohybrid system as a highly efficient reinforcement for woven jute fabric reinforced epoxy composites

In the current work, silica-decorated graphene oxide (SiO₂@GONPs) nanohybrids were used to reinforce the jute fiber/epoxy (JF/EP) composite. Tetraethylorthosilicate (TEOS) was utilized to prepare the SiO₂@GONPs using a facial route. The results of Fourier-transform infrared spectroscopy (FTIR), atomic force microscopy, and elemental X-ray mapping confirmed the successful synthesis of SiO₂@GONPs nanohybrids. Herein, the effects of SiO₂@GONPs loading (0, 0.1, 0.3, and 0.5 wt%) on the mechanical behavior of the JF/EP composite were investigated with emphasis on the flexural and high-velocity impact properties. The results revealed that reinforcement of matrix with 0.3 wt% SiO₂@GONPs enhanced the flexural strength of the JF/EP composite by about 40%. The energy absorption capability and impact limit velocity of the 0.3 wt% SiO₂@GONPs-filled JF/EP composite were 61 and 28%, respectively, higher than those of the neat specimen. Compared to the untreated-GONPs, the SiO₂@GONPs nanohybrid demonstrated an evident superiority in improving the mechanical properties of the JF/EP composite at the same loading. Evaluation of the fracture surfaces of the multiscale composites revealed that the improved fiber-matrix interfacial bonding was the basic mechanism of fracture in these specimens.     

Fabrication of superhydrophobic and antibacterial surface on cotton fabric by doped silica-based sols with nanoparticles of copper

The study discussed the synthesis of silica sol using the sol-gel method, doped with two different amounts of Cu nanoparticles. Cotton fabric samples were impregnated by the prepared sols and then dried and cured. To block hydroxyl groups, some samples were also treated with hexadecyltrimethoxysilane. The average particle size of colloidal silica nanoparticles were measured by the particle size analyzer. The morphology, roughness, and hydrophobic properties of the surface fabricated on cotton samples were analyzed and compared via the scanning electron microscopy, the transmission electron microscopy, the scanning probe microscopy, with static water contact angle (SWC), and water shedding angle measurements. Furthermore, the antibacterial efficiency of samples was quantitatively evaluated using AATCC 100 method. The addition of 0.5% (wt/wt) Cu into silica sol caused the silica nanoparticles to agglomerate in more grape-like clusters on cotton fabrics. Such fabricated surface revealed the highest value of SWC (155° for a 10-μl droplet) due to air trapping capability of its inclined structure. However, the presence of higher amounts of Cu nanoparticles (2% wt/wt) in silica sol resulted in the most slippery smooth surface on cotton fabrics. All fabricated surfaces containing Cu nanoparticles showed the perfect antibacterial activity against both of gram-negative and gram-positive bacteria.     

Evaluation of dynamic viscosity and rheological properties of ceramic materials during liquid phase sintering by numerical‐experimental procedure

The effective shear and bulk viscosity, as well as dynamic viscosity, describe the rheological properties of the ceramic body during the liquid phase sintering process. The rheological parameters depend on the physical and thermo‐mechanical characteristics of the material such as relative density, temperature, grain size, diffusion coefficient, and activation energy. In this paper, the numerical‐experimental method has been developed to study both viscous and rheological behavior of hard porcelain ceramic body during liquid phase sintering. The other aim is to acquire a complete understanding of the response of an incompressible viscose material during sintering such as stress‐strain relations, sintering, and hydrostatic stress. Densification results confirmed that the bulk viscosity was well‐defined with relative density. The stress analysis proved that the sintering stress is more than the hydrostatic stress during the entire sintering time so, the sintering process occurs completely. Deflection results showed that the shear viscosity was a fair estimation of real ones. Dilatometry, SEM, XRD investigations as well as bulk viscosity simulation results confirmed that the “mullitisation plateau” was presented as a very little extraordinary expansion at the final sintering stage.     

Rare earth elements leaching from Chadormalu apatite concentrate: Laboratory studies and regression predictions

The extraction of rare earth elements from apatite concentrate of Chadormalu plant of Iran was studied with the dissolution of ore in nitric acid. The parameters of acidity: 60%, solid to liquid ratio: 30%, leaching time: 30 minute, agitation rate: 200 rpm, temperature: 60 °C and particle size (d₈₀): 50 microns were determined as the optimum operational conditions. The recoveries of lanthanum, cerium, neodymium and yttrium were achieved at 74, 59, 72 and 73%, respectively, in the optimized conditions. Multivariable regression was used to predict La, Ce, Nd, Y and total REEs (Y+Nd+Ce+La) leaching recoveries, using experimental data from laboratory studies. It was achieved quite satisfactory correlations of 0.93, 0.98, 0.99, 0.97 and 0.99 for the prediction of Y, Nd, Ce, La and total REEs recoveries, respectively. It was shown that the proposed equations accurately reproduce the effects of operational variables on the different REEs recoveries, and can be used to optimize the REEs leaching plant.     

Application of polymeric nanofibers in medical designs,part III: Musculoskeletal and urological tissues

Nanotechnology has potential applications in different sciences, especially in the biological sciences and medicine. The nanomaterials are applicable materials with different morphologies such as nanoparticles, nanotubes, nanowires, nanorods, and nanofibers. The development of nanofibers has greatly enhanced the scope for fabricating designs that can be potentially used in medical sciences. In part III the author summarizes the currently available applications of nanofibers in musculoskeletal and urologic tissues. The graphical abstract shows computed tomography analysis and macroscopic images of calvarial defects in rat, with the regeneration result, after four weeks, of bone healing upon implantation of scaffolds in the defect. (A and D) Control group; (B and E) poly (3-hydroxybutyrate-co-3-hydroxyvalerate)/nanohydroxyapatite (PHBV/nHAp) scaffold; and (C and F) PHBV/nHAp scaffold with unrestricted somatic stem cells precultured in vitro.