Study of Creep–Fatigue Crack Growth Behavior in a Gas Turbine Casing

Journal of Failure Analysis and Prevention - A creep–fatigue crack growth on the outer surfaces of a turbine casing was assessed, and the turbine casing’s overall lifetime was...     

Study of graphene device electronic properties with horizontal and vertical double vacancy defects

Abstract

Graphene device electronic properties with double vacancy (DV) defects for two cases, along the direction and perpendicular to the current pathways graphene device, were investigated by using the first principles calculations in combination with density functional theory. The bond lengths, density of states, transmission probability, and current-voltage curves are computed. For relaxed pristine graphene the bond length is around 1.43?Å. However, the bond lengths near the defects for relaxed graphene for DV case are modified to 1.40-1.49?Å. It is also observed that I???V graph is nonlinear based on the current-voltage curve of graphene device which contain DV defects. Furthermore, it has been shown that having the DV defects lead to reduce the current relative to the case of perfect graphene device. Moreover, we noted that when the voltage is increased from zero to one volt new peaks are created near Fermi level in the transmission spectrum graphs. In addition, we noted that the current for the vertical DV defect is smaller than the pristine and horizontal DV device because the number of blocked electrons current pathways in vertical DV defect is larger than the two other cases, namely the pristine and horizontal DV defect cases The obtained results can be useful for the construction of new nanoelectronic devices and may have practical applications.     

Adaptive Markov-based approach for dynamic virtual machine consolidation in cloud data centers with quality-of-service constraints

Dynamic virtual machine (VM) consolidation is one of the emerging technologies that has been considered for low-cost computing in cloud data centers. Quality-of-service (QoS) assurance is one of the challenging issues in the VM consolidation problem since it is directly affected by the increase of resource utilization due to the consolidations. In this paper, we take advantage of Markov chain models to propose a novel approach for VM consolidation that can be used to explicitly set a desired level of QoS constraint in a data center to ensure the QoS goals while improving system utilization. For this purpose, an energy-efficient and QoS-aware best fit decreasing algorithm for VM placement is proposed, which considers QoS objective when determining the location of a migrating VM. This algorithm employs an online transition matrix estimator method to deal with the nonstationary nature of real workload data. We also propose new policies for detecting overloaded and underloaded hosts. The performance of our proposed algorithms is evaluated through simulations. The results show that the proposed VM consolidation algorithms in this paper outperforms the benchmark algorithms in terms of energy consumption, service-level agreement violations, and other cost factors.     

Quantitation of limonin in Iranian orange juice concentrates using high-performance liquid chromatography and spectrophotometric methods

Bitterness is a major problem in the citrus industry worldwide, and is mostly due to the presence of limonoid compounds, especially limonin. In this study, the limonin content of orange juice concentrates from three active factories in west Mazandaran province, after reconstitution, was assayed using high-performance liquid chromatography (HPLC) and spectrophotometric methods. With HPLC, employing acetonitrile/water (v/v) (32:68) with a flow rate of 0.9 ml/min at =207 nm, the limonin content was in the range 11.7–23.3 g/ml with a mean ± standard deviation (SD) of 18.5±3.6 g/ml. Spectrophotometric measurement of limonin at 503 nm with Burnham reagent gave a range of 9.9–21.8 g/ml with a mean ± SD of 17.16±4.1 g/ml. The correlation coefficients of the detector linear response for the limonin standard (0–50 g/ml) for HPLC and spectrophotometry were 0.995 and 0.989, respectively. The percentages of limonin recovery with and without sample addition were 101.02–111.40 and 93.0–100.8, respectively, for HPLC. The percentages of limonin recovery for the spectrophotometric method resulted in 95.6–101.8 for limonin-added samples. The precision factors for the two assay methods were ±2.10% and ±1.69, respectively. The correlation coefficient of the two methods was 0.84. Sensory evaluation of the reconstituted samples from the view point of bitterness confirmed 85% of the results of the analytical methods. This study recommends spectrophotometric analysis as a useful and suitable method for quantitation of limonin in the quality control laboratories of orange juice plants.     

An Evolutionary Game-Theoretic Approach for Base Station Allocation in Wireless Femtocell Networks

Wireless Personal Communications - A set of moving nodes communicating with each other without any infrastructure is considered a mobile ad hoc network (MANET). Stability is a big problem with this...     

A stochastic process-based server consolidation approach for dynamic workloads in cloud data centers

The Journal of Supercomputing - With the development of information technology, there is a need for computational works everywhere and every time. Thus, people should be able to carry out their...     

Modeling of nonlinear extensional and shear rheology of low-viscosity polymer melts

The hierarchical multi-mode molecular stress function (HMMSF) model developed by Narimissa and Wagner [Rheol. Acta 54, 779–791 (2015), and J. Rheol. 60, 625–636 (2016)] for linear and long-chain branched (LCB) polymer melts were used to analyze the set of transient elongational and shear viscosity data of two LCB low-density polyethylenes (1840H and 2426 k), and a linear poly-(ethylene-co-α-butene), PEB A-780090 as reported by [Li et al. J. Rheol. 64, 177 (2020)], who had developed a new horizontal extensional rheometer to extend the lower limits of elongational viscosity measurements of polymer melts. Comparison between model predictions and elongational stress growth data reveals excellent agreement within the experimental window, and good consistency with shear stress growth data, based exclusively on the linear-viscoelastic relaxation spectrum and only two nonlinear model parameters, the dilution modulus G_D for extensional flows, and in addition a constraint release parameter for shear flow.     

The effect of agarose content on the morphology,phase evolution,and magnetic properties of CoFe2O4 nanoparticles prepared by sol‐gel autocombustion method

Hard‐magnetic CoFe₂O₄ nanoparticles were produced with the sol‐gel autocombustion route using agarose and citric acid as a neutral organic gel and combustion agent. For this purpose, the obtained gel is annealed at 800°C for 3 hours and then the spinel structure of the samples was confirmed by X‐ray diffraction (XRD). In addition, the existence of metal‐oxygen complexes in the gel and nanoparticles was investigated by Fourier transformation infrared (FTIR) spectra. Furthermore, FESEM images showed that semispherical and rod‐like particles were obtained by variation in agarose contents. For the rod‐like sample with 2.5 g agarose, the saturation magnetization and coercivity were measured equal to 71.7 emu/g and 10076.84 Oe, respectively.     

Mullite‐glass and mullite‐mullite interfaces: Analysis by molecular dynamics (MD) simulation and high‐resolution TEM

The properties of mullite‐glass and mullite‐mullite interfaces have been investigated at 1800 K by molecular dynamics (MD) simulation and high‐resolution TEM. The simulation showed that mullite‐glass interfaces typically have much lower interfacial energies than mullite‐mullite interfaces, which results from the structural flexibility of the glass and associated accommodation of interfacial mismatch. The (110)‐glass interface has the lowest energy of all interfaces studied, which is consistent with the observed dominance of this interface in experimental mullite‐glass samples examined by TEM. The simulation shows that the interfacial energies of the (100)‐glass and (010)‐glass interfaces are higher than that those of the (001)‐glass interface, so [100] and [010] would be expected to be the dominant growth directions. However, the growth of mullite in glass occurs predominantly in the [001] direction. This apparent discrepancy can be explained by the fact that growth in the [100] and [010] directions is limited by the slow growth of (110) plane (i.e., [110] direction), which facilitates [001] growth, which is confirmed by the TEM data.