Non-Hall-Petch hardness dependence in ultrafine fibrous MgAl2O4-MgO eutectic ceramics fabricated by the laser-heated floating zone (LFZ) method

MgAl₂O₄-MgO eutectic ceramics were fabricated by the laser-heated floating zone (LFZ) method with various growth rates to assess its possible beneficial effect on microstructural aspects and mechanical properties. It was determined that the growth rate optimizing the microstructure and mechanical properties is 750 mm/h; below this value, coarsening of the fibrous microstructure takes place with a degradation of these properties. In the extreme case of 50 mm/h growth rate, the presence of undesirable transverse cracks was unavoidable. Thanks to the high growth rate of 750 mm/h, ultra-fine fibrous microstructure MgAl₂O₄-MgO eutectic ceramics can thus be fabricated with greater hardness (15.5 GPa from Vickers indentation and 22 GPa from nanoindentation) and flexural strength (?345 MPa). It is reported that hardness scales with the interfiber spacing λ according to a law of the type lnλ/λ, contrary to the assumed Hall-Petch-like dependence. This proposed law can be explained in terms of dislocation hardening induced by the MgO fibers.     

Direct <Emphasis Type="SmallCaps">d</Emphasis>-Glucose Oxidation over Noble Metal Nanoparticles Introduced on Polymer and Inorganic Supports

In the present work, nanocatalysts prepared on inorganic supports (zeolites) were investigated in d-glucose oxidation and compared to systems supported on polymer (hypercrosslinked polystyrene (HPS)) previously described. Catalytic activities and selectivities were measured under various reaction conditions. The selectivity of d-glucose oxidation and activity of both Pd-containing zeolites and HPS-Ru were similar (99.7% and TOF 0.013–0.014 mol/(mol Me s)). Physicochemical analysis X-ray photoelectron spectroscopy, liquid nitrogen physisorption, diffuse reflectance infrared Fourier transform spectroscopy of adsorbed CO for metal sites evaluation, CD₃CN for acid sites evaluation showed that Pd species were in oxidic form, while Ru species were in oxidic and reduced form. The catalytic activity decreased when acidic sites were present in Pd-containing zeolites.     

Cationic peptides that increase the thermal stabilities of 2'-O-MeRNA/RNA duplexes but do not affect DNA/DNA melting

Several different cationic nonapeptides have been synthesized and investigated with respect to how they can influence the thermal melting of 2′‐O‐methylRNA/RNA and DNA/DNA duplexes. Each peptide has a C‐terminal L ‐phenylalanine unit and is otherwise uniformly composed of a sequence of a specific basic D ‐amino acid that in most cases will be largely charged at neutral pH. These N‐terminal octamer stretches are composed variously of the amino acids D ‐lysine, D ‐diaminobutyric acid (D ‐Dab), D ‐diaminopropionic acid (D ‐Dap), or D ‐histidine. None of the peptides substantially affected the thermal melting of DNA/DNA duplexes, which was in sharp contrast with their effects on 2′‐O‐methylRNA/RNA duplexes. In particular, the peptides based on diaminopropionic and diaminobutyric acid units had strong positive effects on the melting temperatures of the 2′‐O‐methylRNA duplexes (up to 16 °C higher with 1 equivalent of peptide) at pH 7, whereas at pH 6 the effect was even more drastic (ΔT_m up to +25 °C). The shorter R groups of the Dap and Dab groups appear to have a better length than lysine for enhancement of the thermal melting of the 2′‐O‐methylRNA/RNA duplex, an effect that is more pronounced at lower pH but substantial even at pH 7, although the Dap derivative is not likely to be fully protonated. The dramatic difference between the influence, or lack thereof, on the 2′‐O‐methylRNA/RNA and the DNA/DNA thermal meltings suggest that, although electrostatic interactions probably play a role, there is another major and structurally dependent component influencing the properties of the duplexes. This is also seen in the observation that the oligo‐Dap and oligo‐Dab peptides give greater melting point enhancements than both the lysine peptide (with a longer side chain) and a β‐linked Dap peptide with a shorter side chain and a longer backbone.     

世界杯里的“中国制造”

正尽管中国足球无缘本届俄罗斯世界杯,但中国制造和中国品牌已令人侧目、笑傲全球。中国企业为本届世界杯的赛事经济贡献巨大,这对谋求重塑声誉的国际足联(FIFA)来说,无异于雪中送炭;对中国企业而言,期望通过世界杯的聚集效应放大自身的品牌价值,借势在商业征途上纵横四海,并将足球梦复兴梦与中国梦实业梦的雄心壮志结合得更为实际。2010年,瓦瓦祖拉的塑料喇叭响彻南非,普天同庆的官方用球和国旗、假发、墨镜、望远     

Influence of the co-firing on the leaching of trace pollutants from coal fly ash

The (co)-firing of low-cost alternative fuels is expected to increase in the forthcoming years in the EU because of the economic and environmental benefits provided by this technology. This study deals with the impact of the different coal/waste fuel ratio of the feed blend on the mineralogy, the chemical composition and especially on the leaching properties of fly ash. Different blends of coal, petroleum coke, sewage sludge, wood pellets, coal tailings and other minor biomass fuels were tested in PCC (pulverised coal combustion) and FBC (fluidized bed combustion) power plants. The co-firing of the studied blends did not drastically modify the mineralogy, bulk composition or the overall leaching of the fly ash obtained. This suggests that the co-firing process using the alternative fuels studied does not entail significant limitations in the re-use or management strategies of fly ash.     

Gauging of Cytochrome c Structural Fluctuation by Time-Resolved Proton Pulse

A brief proton pulse technique, based on photo-excitation of pyranine, was employed for measuring the protonation dynamics of cytochrome c in aqueous solutions. Time-resolved monitoring of the protonation state of the pyranine anion yielded detailed information from which the temporal state protonation of the surface carboxylates and histidine residues were deduced. The surface groups were found to be coupled by electrostatic interaction where the state of protonation of one affects the pK of the others. In the same sense, altering the charge distribution of a protein by a redox reaction affects the reactivity of the surface groups with protons in the bulk. The surface groups can exchange protons among themselves at a very high rate. The velocities of these reactions are functions of the connectivity between the proton binding sites. A single proton exchange reaction between the surface groups could be identified as the proton exchange between H26 and E44. The reaction is fast and affected by the redox state of the protein. It is proposed that the enhanced rate of this reaction is coupled with transient conformational changes that are not noticeable in time-averaging measurements such as X-ray diffraction or NMR.     

Room temperature efficacious synthesis of diphenylmethane over Fe/Al-MCM-41 catalysts

Fe/Al-MCM-41 (Si/Al = 25, 50, 75 and 100) were synthesized. Their catalytic activity was evaluated towards benzylation of benzene with benzyl chloride in liquid phase. The catalytic activity of Fe/Al-MCM-41(25) was higher than the other catalysts. Diphenylmethane(DPM) was obtained as the major product with 100% selectivity and with 100% conversion of benzyl chloride under optimum condition. The effect of temperature and the feed ratio, on the activity of Fe/Al-MCM-41(25) and selectivity towards DPM was studied and a possible reaction mechanism was proposed.     

Inhibition Studies of Mycobacterium tuberculosis Salicylate Synthase (MbtI)

Mycobacterium tuberculosis salicylate synthase (MbtI), a member of the chorismate‐utilizing enzyme family, catalyses the first committed step in the biosynthesis of the siderophore mycobactin T. This complex secondary metabolite is essential for both virulence and survival of M. tuberculosis, the etiological agent of tuberculosis (TB). It is therefore anticipated that inhibitors of this enzyme may serve as TB therapies with a novel mode of action. Herein we describe the first inhibition study of M. tuberculosis MbtI using a library of functionalized benzoate‐based inhibitors designed to mimic the substrate (chorismate) and intermediate (isochorismate) of the MbtI‐catalyzed reaction. The most potent inhibitors prepared were those designed to mimic the enzyme intermediate, isochorismate. These compounds, based on a 2,3‐dihydroxybenzoate scaffold, proved to be low‐micromolar inhibitors of MbtI. The most potent inhibitors in this series possessed hydrophobic enol ether side chains at C3 in place of the enol‐pyruvyl side chain found in chorismate and isochorismate.