Pronunciation prediction with Default&Refine

The Default&Refine algorithm is a new rule-based learning algorithm that was developed as an accurate and efficient pronunciation prediction mechanism for speech processing systems. The algorithm exhibits a number of attractive properties including rapid generalisation from small training sets, good asymptotic accuracy, robustness to noise in the training data, and the production of compact rule sets. We describe the Default&Refine algorithm in detail and demonstrate its performance on two benchmarked pronunciation databases (the English OALD and Flemish FONILEX pronunciation dictionaries) as well as a newly-developed Afrikaans pronunciation dictionary. We find that the algorithm learns more efficiently (achieves higher accuracy on smaller data sets) than any of the alternative pronunciation prediction algorithms considered. In addition, we demonstrate the ability of the algorithm to generate an arbitrarily small rule set in such a way that the trade-off between rule set size and accuracy is well controlled. A conceptual comparison with alternative algorithms (including Dynamically Expanding Context, Transformation-Based Learning and Pronunciation by Analogy) clarifies the competitive performance obtained with Default&Refine.     

Pore microgeometry analysis in low-resistivity sandstone reservoirs

The objective of this work is to analyse the pore microgeometry and its effect on petrophysical properties in six low-resistivity sandstone reservoirs by combining a 2D quantitative petrographic image analysis (PIA) and 3D petrophysical tools. The classic petrophysical tools enable the measurement of different classic reservoir properties such as specific surface area, average pore diameter, pore size distribution, macroporosity and microporosity, capillary pressure versus saturation, pore chamber–pore throat diameter ratio, electrical properties and permeability. The petrographic image analysis quantifies pore microgeometry in more than four orders of magnitude, from submicron to millimeter scale. Chloritic low-resistivity sandstones show dual porosity structure defined as chloritic texture. The pore microgeometrical parameters measured by petrographic image analysis allow one to model different reservoir properties such as capillary pressure, permeability and electrical behaviour. The results obtained in these models show that pore microgeometry plays an important role in the physical properties of low-resistivity sandstone reservoirs.     

PROTEIN PRECIPITATION DURING WORT BOILING: QUALITY ASPECTS OF DIMINISHED WORT BOILING TIMES OF BREWS PREPARED FROM PROANTHOCYANIDIN-FREE OR REGULAR RAW MATERIALS

When using proanthocyanidin-free materials for the production of beer, a reduction of the wort boiling time can be considered. In worts prepared with regular malt and tannin-free hop extract there is a continuous precipitation of the malt flavanoids while in brews prepared from proanthocyanidin-free malt and regular hops there is a simultaneous extraction and removal of the hop flavanoids leading to constant levels of these hop flavanoids. The results also show that the level of Kjeldahl nitrogen in worts boiled with hops will be the same as that in worts boiled with n-hexane tannin-free hop extracts. These results and the fact that more protein precipitates in brews containing no malt or hop proanthocyanidins suggest that, unlike what is the case during the development of beer haze, polyphenols are not necessary for an effective protein precipitation during wort boiling.     

Current results of endoscopic sphincterotomy for lithiasis of the common bile duct

Between January 1989 and June 1990, endoscopic sphincterotomy was performed in 308 consecutive patients with common bile duct stones (mean age: 74 years). Complete clearance of common bile duct was achieved at the first attempt in 65% of cases. This rate was significantly related to the size and the number of biliary stones. The success rate reached 97 percent after repeated endoscopic sessions (127 patients), mechanical lithotripsy (20 patients), extracorporeal or intracorporeal lithotripsy (18 and 11 patients, respectively). During the month following the endoscopic sphincterotomy, 39 patients (13%) developed one or more complications and 11 patients (3.7%) died. The complication rate was related to the time elapsed between biliary opacification and endoscopic sphincterotomy (P = 0.04) and between endoscopic sphincterotomy and total common bile duct clearance (P = 0.0007). No patient younger than 75 years died, but death occurred in 4.5% of the patients older than 75 years. Thirty patients (10%) developed endoscopic sphincterotomy-related complications. Cholangitis and bleeding were the most frequent complications (4 and 2%, respectively). Cholangitis occurred more frequently among the patients older than 75 (P < 0.05) or when transhepatic guided endoscopic sphincterotomy or intracorporeal lithotripsy was used (P < 0.005). Cholangitis led to death in 2 patients, 86 and 87 years old (0.7%). Endoscopic sphincterotomy related complications developed within 48 hours in all but 4 patients (2 patients with pancreatitis and 2 patients with cholecystitis).     

The mechanical behaviour of porous austenitic stainless steel fibre structures

The mechanical properties of metal fibre porous structures were studied in the light of their potential application as surface coatings of implants. Stainless steel AISI 316 L fibres with diameters of 50 and 100μm were compacted and sintered. The variation of the modulus of elasticity with density, as obtained in tension, corresponds closely with theoretical models. The ultimate failure of the tensile specimens proceeds through the fibres, and not through the sinter bonds, except at lower densities. Differences in yield strength between 50 and 100 μm fibre tensile specimens are explained on the basis of the onset of plastic deformation of the individual fibres. Upon compression the modulus of elasticity is nearly 10 times smaller than in tension. This result is due to the different deformation patterns of the fibres in compression and tension.     

High-mobility Ga0.47In0.53As thin epitaxial layers grown by MBE, very closely lattice-matched to InP

Thin epitaxial layers (< 1.5 ?m) of Ga0.47In0.53As were grown by molecular beam epitaxy, very closely lattice-matched to InP, despite a nonrotating substrate holder. Hall mobilities were measured as a function of temperature in the dark and on illumination. At low temperature, the peak mobility of undoped layers lies between 35000 and 40000 cm2V?1s?1 in the dark and increases up to 45000 cm2V?1s?1 when measured in the light. Preliminary results obtained on slightly Sn-doped layers are also reported.     

Comparison of sample preparation methods for detection of Legionella pneumophila in culture-positive bronchoalveolar lavage fluids by PCR

A prospective study was conducted on 25 Legionella pneumophila culture-positive and 98 culture-negative bronchoalveolar lavage fluid samples to compare two DNA preparation methods: a rapid modified Chelex-based protocol and a proteinase K method. PCR was found to be more sensitive with the Chelex-based method (P = 0.03). N difference was found concerning the inhibition rate.     

Comparison among emission and susceptibility reduction techniques for electromagnetic interference in digital integrated circuits

This paper presents a comparative study of susceptibility reduction techniques for electromagnetic interference (EMI) in digital integrated circuits (ICs). Both direct power injection (DPI) and very-fast transmission-line pulsing (VF-TLP) methods are used to inject interference into the substrate of a single test chip. This IC is built around six functionally identical cores, differing only by their EMI protection strategies (RC protection, isolated substrate, meshed power supply network) which were initially designed for low emission design rules. The ranking of three of these cores in terms of electromagnetic immunity is then compared with the one of their radiated emission, thanks to near-field scanning (NFS) measurements. This leads to the establishing of design guidelines for low EMI in digital ICs.     

Complex permittivity characterization of benzocyclobutene for terahertz applications

High-quality polymers such as the benzocyclobutene polymer (BCB) provide interesting dielectric feature for terahertz applications. Already used in silicon integrated circuit technologies, this material could become one of the most promising candidates for the realization of future THz waveguides and interconnections on a silicon substrate but also after active devices process on the top of any other technology (GaAs, InP, GaN…). A frequency-dependent complex permittivity of spin-coated thick layers of this low-k dielectric is obtained from transmittance spectra measured with Fourier transform spectroscopy in the frequency range of 0.5-5.4 THz. The dielectric constant and the loss tangent are discussed according to curing conditions of the photosensitive resin used. A low loss tangent value of 7 − 9 × 10^-3 at 1 THz is obtained with polymerisation in oxygen-free atmosphere. An incomplete curing and a high dose UV exposure have a weak impact on losses. These results associated with the high compatibility of this polymer with silicon and metals make BCB layers well suited for the design of microelectronic THz devices and circuits.     

The dynamics of aroma release during consumption of candies of different structures,and relationship with temporal perception

We investigated the role of both candy texture and eating technique (melting or chewing) on the dynamics of aroma release. One novelty of this type of analysis was the simultaneous application of instrumental and sensory analysis. Four candy textures were established based on their storage modulus at 1 Hz by varying the gelatine content between 0 and 15% w/w. The invivo release of three aroma compounds was monitored using Proton Transfer Reaction Mass Spectrometry and with a trained panel of testers. The gelatine content had no significant effect on the headspace/product partition and diffusion properties of the aroma compounds. The highest invivo release for all aroma compounds was obtained with the 2% gelatine sample. Our findings indicated that aroma release was determined by interaction between the product properties and oral behaviour. Relations between the dynamics of release and perception (method of Temporal Dominance of Sensations) have been established on temporal parameters.