Development of multicomponent vaporization/condensation model for a reactor safety analysis code SIMMER-III: Theoretical modeling and basic verification

It is believed that the numerical simulation of thermal-hydraulic phenomena of multiphase, multicomponent flows in a reactor core is essential to investigate core disruptive accidents (CDAs) of liquid-metal fast reactors. A new multicomponent vaporization/condensation (V/C) model was developed to provide a generalized model for a fast reactor safety analysis code SIMMER-III, which analyzes relatively short-time-scale phenomena relevant to accident sequences of CDAs. The model characterizes the V/C process associated with phase transition through heat-transfer and mass-diffusion limited models to follow the time evolution of the reactor core under CDA conditions. The heat-transfer limited model describes the nonequilibrium phase-transition processes occurring at interfaces, while the mass-diffusion limited model is employed to represent effects of noncondensable gases and multicomponent mixture on V/C processes. Verification of the model and method employed in the multicomponent V/C model of SIMMER-III was performed successfully by analyzing a series of multicomponent phase-transition experiments.     

Phase-field modeling for facet dendrite growth of silicon

Dendrite growth of silicon from its undercooled melt was investigated by using the phase-field model for a faceted crystal with anisotropic interfacial energy. The phase-field parameters at the thin interface limit were derived and used in the simulation. The accuracy of the model was estimated from the calculated equilibrium interface shape. The errors in anisotropy and Gibbs-Thomson coefficient were within 1% and 10%, respectively. The growth of a silicon crystal from its undercooled melt has been analyzed and it is shown that the shape of growing crystal changes from square-like to dendritic with increase of undercooling. In a facet dendrite growth the tip grows keeping its shape and the shape is the same regardless of undercooling or growth velocity. It is also shown that there exists the scaling law between the characteristic length of the tip and growth velocity similar to that of a non-facet dendrite.     

Rotation Response of a Rigid Body under Seismic Excitation

After the 1994 Sanriku-Haruka-Oki, Japan, earthquake, rotation of tombstones along the vertical axis occurred in a graveyard about 34?m from the Japan Meteorological Agency Hachinohe Observatory where strong motion was recorded. The properties of seismic motion that make a rigid rectangular solid body rotate are discussed. Shaking table tests were conducted to reproduce the rotation response of Japanese-style tombstones which typically consist of several stone blocks whose shapes are rectangular solids. Data obtained from those tests were used to calibrate a numerical model by the three-dimensional distinct element method. Results of the shaking tests and numerical analyses showed that rotation of a rigid rectangular solid body may be caused by the combination of the rocking of the body and particle motion of the input acceleration. Rotation behavior of an actual tombstone was simulated based on the observed accelerogram. Findings show that one or two cycles of particle motion near peak acceleration caused the rotation.     

Difference in carbo-thermal reduction reaction kinetics of NiO in microwave E- and H-fields

A powder mixture of NiO and graphite was heated in a single mode-microwave (MW) applicator at 2.45 GHz for carbo-thermal reduction of NiO. The specimen was placed in the wave guide at maximum positions of either electric (E) field or magnetic (H) field and kept at a constant temperature.A tendency was observed that the reduction rate at 600 °C was larger in the H-field than in the E-field. Considering the fact that NiO can be heated only in the E-field, while graphite can be heated in both fields, graphite particles in the powder mixture might be selectively heated in the H-field. Hence, it is postulated that a microscopic temperature gradient is formed more in the H-field, which caused the gas convection, then the mass transfer and the gas-solid reaction is enhanced, so the enhanced reduction kinetics resulted, eventually.     

Development of a three-dimensional CDA analysis code: SIMMER-IV and its first application to reactor case

For the transition phase analysis of core disruptive accidents, the development of a three-dimensional reactor safety analysis code, SIMMER-IV, has been carried out based on the technology of the two-dimensional SIMMER-III code. The world first application of SIMMER-IV to a small-sized sodium-cooled fast reactor has also been attempted to clarify event progression in the early stage of the transition phase. This SIMMER-IV calculation is compared to the two-dimensional case calculated by SIMMER-III, neglecting the presence of control rod guide tubes. The present analysis with the three-dimensional representation suggests that the conventional scenario leading to rather early high-mobility fuel pool formation is unrealistic and the degraded core tends to keep low mobility in the early stage of transition phase.     

Secure and Defensive High Self-Esteem.

Long-standing theories have suggested high self-esteem (SE) can assume qualitatively different forms that are related to defensiveness. The authors explored whether some high-SE individuals are particularly defensive because they harbor negative self-feelings at less conscious levels, indicated by low implicit SE. In Study 1, participants high in explicit SE but low in implicit SE showed the highest levels of narcissism--an indicator of defensiveness. In Studies 2 and 3, the correspondence between implicit and explicit SE predicted defensive behavior (in-group bias in Study 2 and dissonance reduction in Study 3), such that for high explicit-SE participants, those with relatively low implicit SE behaved more defensively. These results are consistent with the idea that high SE can be relatively secure or defensive. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Extremely Low‐Threshold Amplified Spontaneous Emission of 9,9′‐Spirobifluorene Derivatives and Electroluminescence from Field‐Effect Transistor Structure

By doping 2,7‐bis[4‐(N‐carbazole)phenylvinyl]‐9,9′‐spirobifluorene (spiro‐SBCz) into a wide energy gap 4,4′‐bis(9‐carbazole)‐2,2′‐biphenyl (CBP) host, we demonstrate an extremely low ASE threshold of E_th = (0.11 ± 0.05) μJ cm^–2 (220 W cm^–2) which is the lowest ASE threshold ever reported. In addition, we confirmed that the spiro‐SBCz thin film functions as an active light emitting layer in organic light‐emitting diode (OLED) and a field‐effect transistor (FET). In particular, we succeeded to obtain linear electroluminescence in the FET structure which will be useful for future organic laser diodes.     

Crosslinking kinetics in emulsion polymerization

Network formation in free-radical polymerization is investigated both from experimental and theoretical points of view. In a bulk free-radical crosslinking copolymerization, the radical concentration increases significantly due to a decrease in the bimolecular termination rate. Some fraction of radicals is trapped during the course of network formation, and the reactivity of the radicals in liquid state is completely different from that in solid state (trapped radicals) in terms of both propagation and termination. In emulsion crosslinking polymerization, the crosslinking density tends to be fairly high even from the start of the polymerization. The crosslinking density development is substantially different from that in bulk and solution polymerizations, in which the crosslinking density increases with time, at least in the earlier stages of polymerization. Due to the elastic contribution of free energy change, the monomer concentration in the polymer particles is lower than for linear emulsion polymerizations as long as the monomer droplets exist, resulting in an enhanced tendency toward crosslinking reactions.