Novel flame retardants, 1,2-bis(2,4,6-tribromophenoxy)ethane and 2,3,4,5,6-pentabromoethylbenzene, in United States' environmental samples

Two brominated flame retardants, 1,2-bis(2,4,6-tribromophenoxy)ethane (TBE) and 2,3,4,5,6-pentabromoethylbenzene (PEB), were detected and identified in ambient air samples from various sites in the United States. The identifications were confirmed by comparing the gas chromatographic retention times and mass spectra of the compounds found in the environment with those of authentic materials. Generally, the TBE concentrations in air were comparable to those of tetra- through hexabrominated diphenyl ethers (PBDEs) and often higher than those of decabromodiphenyl ether (BDE-209). The atmospheric TBE concentrations at locations in the southern United States were higher than those in the northern United States. TBE was also found in a sediment core from Lake Michigan; the concentrations of TBE increased with time, were lower than those of BDE-209, but were approximately 10 times higher than the sum of BDE-47, -99, and -100. The maximum PEB concentration in Chicago air was 550 pg/ m3, which was 10 times higherthan the concentration of total PBDEs in this sample. In general, the concentrations of PEB in air samples were low but detectable and were less than those of PBDEs. PEB was not found in the sediment core from Lake Michigan. These occurrences of relatively high concentrations of TBE and PEB in environmental samples may reflect the increasing usage of these compounds as flame retardants.     

Fractionation procedures for obtaining cocoa butter-like fat from enzymatically interesterified palm olein

Solvent-free lipase-catalyzed incorporation of stearic acid in palm olein by the 1,3-regiospecific Novo Lipase Lipozyme IM20 resulted in the formation of a complex mixture of fatty acid glycerides and free fatty acids. The stearoyl incorporation in palm olein gave rise to the formation of 39.3% of the desired cocoa butter-like triglycerides in the fatty acid glyceride portion, namely distearoyl-oleoyl-glycerol (SOS), palmitoyl-oleoyl-stearoyl-glycerol (POS) and dipalmitoyl-oleoyl-glycerol (POP). A combination of fractionation steps involving initially the removal of free fatty acids (FFA) from the product mixture by steam distillation under vacuum, followed by fractional crystallization of the fatty acid-free glycerides in hexane and/or acetone, gave a fat, whose triglyceride composition and melting profile were comparable to that of cocoa butter as adduced by reversed-phase high performance liquid chromatography (HPLC) and differential scanning calorimetry (DSC). The yield of the cocoa butter-like fat was approximately 25% of the weight of the original palm olein.     

De novo lipogenesis predicts short-term body-composition response by bioelectrical impedance analysis to oral nutritional supplements in HIV-associated wasting

We studied the effects of enteral supplements on protein and energy intakes, body composition, energy expenditure, and gastrointestinal histology in 49 subjects with human immunodeficiency virus-associated weight loss (12.7 +/- 0.9% of body wt). We also determined whether a stable-isotope mass spectrometric measurement at baseline might predict the short-term response of fat-free mass (FFM) measured by bioelectrical impedance analysis. Thirty-nine subjects completed the study after being randomly assigned to receive either a whole-protein-based (n = 22) or a peptide-based (n = 17) formula. A nonsupplemented, nonrandomly assigned group (n = 13) was followed concurrently. Both formulas were well tolerated. Voluntary intakes of energy and protein from nonsupplement sources decreased significantly during supplementation [by 819-1638 kJ (196-382 kcal)/d and 5.6-14.4 g protein/d, respectively; P < 0.01] but to a lesser extent than the intake from the supplement [2300-2510 kJ(550-600 kcal)/d and 19-28 g protein/d, respectively], so that net increases in intakes of protein and energy (P < 0.03), as well as of several vitamins and trace elements were increased. Nevertheless, the mean FFM did not increase for the group as a whole, although there was considerable interindividual heterogeneity. Changes in FFM at 6 wk were significantly inversely correlated (r = 0.65, P < 0.01) with baseline synthesis of fat (de novo hepatic lipogenesis), but not with other potential measures of energy intake (insulin-like growth factor 1 or its binding protein) or inflammation (soluble tumor necrosis factor receptors I or II). The prospective identification of FFM response by measurement of de novo hepatic lipogenesis supported the hypothesis that the subset of wasting patients whose FFM is unresponsive to nutrient supplementation have altered nutrient metabolism.     

Use of a spectrophotometric hemoglobin assay to objectively quantify intracerebral hemorrhage in mice

BACKGROUND AND PURPOSE: There is great interest in developing novel anticoagulant or thrombolytic strategies to treat ischemic stroke. However, at present there are limited means to accurately assess the hemorrhagic potential of these agents. The present studies were designed to develop and validate a method to accurately quantify the degree of intracerebral hemorrhage (ICH) in murine models. METHODS: In a murine model, ICH was induced by stereotaxic intraparenchymal infusion of collagenase B alone (6 x 10(-6) U; n = 5) or collagenase B followed by intravenous recombinant tissue plasminogen activator (rt-PA) (0.1 mg/kg; n = 6). Controls consisted of either sham surgery with stereotaxic infusion of saline (n = 5) or untreated animals (n = 5). ICH was (1) graded by a scale based on maximal hemorrhage diameter on coronal sections and (2) quantified by a spectrophotometric assay measuring cyanomethemoglobin in chemically reduced extracts of homogenized murine brain. This spectrophotometric assay was validated with the use of known quantities of hemoglobin or autologous blood added to a separate cohort of homogenized brains. With this assay, the degree of hemorrhage after focal middle cerebral artery occlusion/reperfusion was quantified in mice treated with postocclusion high-dose intravenous rt-PA (10 mg/kg; n = 11) and control mice subjected to stroke but treated with physiological saline solution (n = 9). RESULTS: Known quantities of hemoglobin or autologous blood added to fresh whole brain tissue homogenates showed a linear relationship between the amount added and optical density (OD) at the absorbance peak of cyanomethemoglobin (r = 1.00 and .98, respectively). When in vivo studies were performed to quantify experimentally induced ICH, animals receiving intracerebral infusion of collagenase B had significantly higher ODs than saline-infused controls (2.1-fold, increase; P = .05). In a middle cerebral artery occlusion and reperfusion model of stroke, administration of rt-PA after reperfusion increased the OD by 1.8-fold compared with animals that received physiological saline solution (P < .001). When the two methods of measuring ICH (visual score and OD) were compared, there was a linear correlation (r = .88). Additional experiments demonstrated that triphenyltetrazolium staining, which is commonly used to stain viable brain tissue, does not interfere with the spectrophotometric quantification of ICH. CONCLUSIONS: These data demonstrate that the spectrophotometric assay accurately and reliably quantifies murine ICH. This new method should aid objective assessment of the hemorrhagic risks of novel anticoagulant or thrombolytic strategies to treat stroke and can facilitate quantification of other forms of ICH.     

Dechlorane plus, a chlorinated flame retardant, in the Great Lakes

A highly chlorinated flame retardant, Dechlorane Plus (DP), was detected and identified in ambient air, fish, and sediment samples from the Great Lakes region. The identity of this compound was confirmed by comparing its gas chromatographic retention times and mass spectra with those of authentic material. This compound exists as two gas chromatographically separable stereoisomers (syn and anti), the structures of which were characterized by one- and two-dimensional proton nuclear magnetic resonance. DP was detected in most air samples, even at remote sites. The atmospheric DP concentrations were higher at the eastern Great Lakes sites (Sturgeon Point, NY, and Cleveland, OH) than those at the western Great Lakes sites (Eagle Harbor, MI, Chicago, IL, and Sleeping Bear Dunes, MI). Atthe Sturgeon Point site, DP concentrations once reached 490 pg/m3. DP atmospheric concentrations were comparable to those of BDE-209 at the eastern Great Lakes sites. DP was also found in sediment cores from Lakes Michigan and Erie. The peak DP concentrations were comparable to BDE-209 concentrations in the sediment core from Lake Erie butwere about 30 times lower than BDE-209 concentrations in the core from Lake Michigan. In the sediment cores, the DP concentrations peaked around 1975-1980, and the surficial concentrations were 10-80% of peak concentrations. Higher DP concentrations in air samples from Sturgeon Point, NY, and in the sediment core from Lake Erie suggest that DP's manufacturing facility in Niagara Falls, NY, may be a source. DP was also detected in archived fish (walleye) from Lake Erie, suggesting that this compound is, at least partially, bioavailable.     

Effect of laminated wafer toward dicing process and alternative double pass sawing method to reduce chipping

Thin wafers of 100-/spl mu/m thickness laminated with die-attach film (DAF) was diced using a standard sawing process and revealed a low chipping crack resistance. Wafers laminated with conductive DAF shows greater chipping compared to nonconductive DAF and bare silicon wafer. It was found through scanning electron microscopy (SEM) micrographs, energy dispersive X-ray (EDX) analysis, and atomic force microscopy (AFM) that silver fillers in the conductive DAF was the cause of excessive blade loading which resulted in bad chipping quality. To reduce chipping/cracking induced by sawing, an alternative double-pass sawing method was developed and is explained in the paper. The methodology of this study discusses a double-pass method, where the first pass dice through the wafer and varied the percentage of DAF thickness cut. Best results were achieved when dicing through the wafer and 0% of DAF, followed by a full separation in the second pass. Approximately 80% of chipping reduction compared to conventional single pass.     

A multi-scale multi-physics modeling framework of laser powder bed fusion additive manufacturing process

A longstanding challenge is to optimize additive manufacturing (AM) process in order to reduce AM component failure due to excessive distortion and cracking. To address this challenge, a multi-scale physics-based modeling framework is presented to understand the interrelationship between AM processing parameters and resulting properties. In particular, a multi-scale approach, spanning from atomic, particle, to component levels, is employed. The simulations of sintered material show that sintered particles have lower mechanical strengths than the bulk metal because of their porous structures. Higher heating rate leads to a higher mechanical strength due to accelerated sintering rates. The average temperature in the powder bed increases with higher laser power. The predicted distortion due to residual stress in the AM fabricated component is in good agreement with experimental measurements. In summary, the model framework provides a design tool to optimize the metal powder based additive manufacturing process.     

A GaAs MESFET IC for optical multiprocessor networks

A GaAs, enhanced/depletion mode, self-aligned, refractory-gate, MESFET chip process and circuit family have been developed for the integration of fiber-optic data link functions (e.g. photodetection, amplification, clock recovery, and deserialization) on a single chip. These authors describe the process and present results on integrating a complete optical receiver, including the photodiode and clock recovery circuits, on one chip. The chip functions use over 2000 devices, and perform at 1-GB/s, while dissipating less than 300 mW of heat. This chip is the most complex high-performance optoelectronic integrated circuit reported to date     

Epithelial downgrowth following penetrating keratoplasty with a running adjustable suture

A 78-year-old female patient who had a third penetrating keratoplasty for aphakic bullous keratopathy and iris fixation of a posterior chamber intraocular lens using a single, 10-0 nylon running suture technique developed a suture track leak postoperatively. Attempts to ease the tension on the suture track reduced the astigmatism and stopped the leak temporarily. Eighteen months after the procedure, epithelial downgrowth was noted on the corneal graft on both sides of the leak site and intraocular pressure was elevated. A fourth penetrating keratoplasty combined with a trabeculectomy was performed. To our knowledge, this is the first report of epithelial downgrowth associated with suture adjustment following the single, continuous suture technique.