P-V-T-C equation for epoxy molding compound

The isothermal and isobaric volume shrinkage is measured by a single-plunger-type dilatometer for epoxy molding compound (EMC). This device has been found suitable for measuring volume change of thermosetting materials such as commercial EMC under isothermal and isobaric conditions. Moreover, the degree of cure (conversion) was determined by a differential scanning calorimetry (DSC). Combining volume change and conversion, a mathematic pressure-volume-temperature-cure (P-V-T-C) model is proposed to describe the relationship between volume shrinkage, pressure, temperature and conversion. The P-V-T-C equation can be simply expressed as VS(P,T,C)=F/sub 1/(P,T)/spl middot/C/sup F2(P,T)/. This equation can well describe historical profiles of volume shrinkage under specified isothermal and isobaric states. From the predicted results, volume shrinkage under different pressure levels in any specified temperature can be approximated as and it obeys the principle of linearity. With the help of this model, together with three-dimensional mold filling simulation, engineers will be able to predict warpage and residual stresses for a package after molding.     

On the importance of van der Waals interaction in the groove binding of DNA with ligands: restrained molecular dynamics study

Comparison of interaction energy between an oligonucleotide and a DNA-binding ligand in the minor and major groove modes was made by use of restrained molecular dynamics. Distortion in DNA was found for the major groove mode whereas less significant changes for both ligand and DNA were detected for the minor groove binding after molecular dynamics simulation. The conformation of the ligand obtained from the major groove modes resembles that computed with the ligand soaked in water. The van der Waals contact energy was found to be as significant as electrostatic energy and more important for difference in binding energy between these two binding modes. The importance of van der Waals force in groove binding was supported by computations on the complex formed by the repressor peptide fragment from the bacteriophage 434 and its operator oligonucleotide.     

Hg_（1－x）Cd_xTe的扫描光致发光研究

用傅里叶变换红外扫描光致发光方法研究了Ｈｇ１－ｘＣｄｘＴｅ体单晶样品，该方法可直接得到ＨｇＣｄＴｅ晶片组分的二维平面分布，并可得到辐射复合在复合机制中所占比重的平面分布，以及晶体中非平衡载流子寿命的分布     

A new method for calculating loss coefficients [of power systems]

A method is proposed which avoids many limitations associated with traditional B-coefficient loss coefficient calculation. The proposed method, unlike the traditional B-coefficient method, is very fast and can handle line outages. The method utilizes network sensitivity factors which are established from DC load flow solutions, Line outage distribution factors (ODFs) are formulated using changes in network power generations to simulate the outaged line from the network. The method avoids the use of complicated reference frame transformations based upon Kron's tenser analysis. The necessity of data normalization used in least squares and the evaluation of the slope of &thetas;_j versus PG_n is not necessary with the proposed method. Using IEEE standard 14-bus and 30-bus systems, the method's results are compared against results obtained from an AC load flow program (LFED). The method's solution speed is compared to that of the LFED method, the base case database method and the conventional B-coefficient method based on A_jn-factor. The proposed method is easy to implement and, when compared to other methods, has exhibited good accuracy and rapid execution times. The method is well suited to online dispatch applications     

Void formation and growth in a class of compressible solids

A new class of compressible elastic solids, which includes the Blatz-Ko material as a special case, is proposed. A closed-form solution is constructed and studied for a bifurcation problem modeling void formation in this class of compressible elastic solids. The relation between the void-formation condition and the material parameters is obtained analytically. An energy comparison of the void-formation deformation and the homogeneous expansion deformation is carried out.     

石化行业污水回用途径的可行性分析

随着石化行业污水回用技术的成熟,污水回用途径成了制约污水回用的瓶颈。通过对各种回用水途径的可操作性比较,筛选出最佳途径,并通过现场试验,从技术、经济、可操作性方面论证,认为石化污水回用于工业循环冷却水场作为补充水确实可行。     

Small-dimension power-efficient high-speed vertical-cavity surface-emitting lasers

Small-dimension power-efficient high-speed oxide-confined 980 nm vertical-cavity surface-emitting lasers (VCSELs) with record-high bandwidth/power-dissipation ratio of 12.5 GHz/mW have been demonstrated. The devices show a modulation bandwidth of 15 GHz at a bias current 0.9 mA, corresponding to only 1.2 mW power dissipation     

Human Body Posture Classification by a Neural Fuzzy Network and Home Care System Application

A new classification approach for human body postures based on a neural fuzzy network is proposed in this paper, and the approach is applied to detect emergencies that are caused by accidental falls. Four main body postures are used for posture classification, including standing, bending, sitting, and lying. After the human body is segmented from the background, the classification features are extracted from the silhouette. The body silhouette is projected onto horizontal and vertical axes, and then, a discrete Fourier transform is applied to each projected histogram. Magnitudes of significant Fourier transform coefficients together with the silhouette length-width ratio are used as features. The classifier is designed by a neural fuzzy network. The four postures can be classified with high accuracy according to experimental results. Classification results are also applicable to home care emergency detection of a person who suddenly falls and remains in the lying posture for a period of time due to experiments that were performed.     

A full-duplex radio-over-fiber system based on optical carrier suppression and reuse

We have experimentally demonstrated a full-duplex radio-over-fiber system using a single light source at central station (CS). Optical carrier suppression modulation scheme was employed to generate 40-GHz optical millimeter wave and up-convert the baseband signal simultaneously at CS for downlink transmission while the same optical carrier was reused at base station for uplink connection. The bidirectional full-duplex 2.5-Gb/s data was successfully transmitted over 40-km standard single-mode fiber (SMF-28) for both upstream and downstream channels with less than 2-dB power penalty. This system shows simple cost-efficient configuration and good performance over long-distance delivery.