99Tcm-MDP scintigraphy in high-voltage electrical burn patients

In high-voltage electrical burn injuries (> 1000 V), it is difficult to identify the site and extent of non-viable deep tissue damage for debridement to avoid further tissue injury from wound infection and the risk of sepsis. This prospective study was designed to evaluate the usefulness of 99Tcm-methylene di-phosphonate (99Tcm-MDP) scintigraphy in detecting the extent of tissue injury and determining the level of amputation required for electrical burn patients. Over a 5 year period, 33 high-voltage electrical burn patients were studied. Blood flow and blood pool studies revealed absent perfusion in 37 limbs, all of which eventually were amputated. In addition to a routine three-phase bone scan, images were obtained at 30-60 min (early images) to evaluate whether soft tissue injury could be detected better at that time. For comparison of the detection rate from the early images and bone (delayed) images, 164 corresponding spot views of both images were reviewed. Eighty-three and 125 tissue necrotic lesions were demonstrated by the early images and bone images respectively. All of the 83 lesions found by the early images were more clearly identified by the bone images. All but one of the 125 lesions underwent surgical debridement or amputation. We concluded that the blood flow and blood pool images correlated well with the level of amputation required. The site and extent of tissue necrotic lesions can be clearly identified on 99Tcm-MDP bone scans. Because the early images were less sensitive in detecting tissue necrosis, we suggest that early imaging is not necessary.     

Direct analysis of transient stability: Experience with the Taipower system

A direct method for transient stability analysis of a multimachine power system is presented. Emphasis is placed on the detailed development and evaluation of the proposed method in transient stability assessment. An energy-type Lyapunov function, taking into account the effect of transfer conductance, is introduced first. The potential energy boundary surface method is then adopted to determine the critical energy value quickly. The main computational burden in the direct method lies in the reduction of the admittance matrices. In this paper, an efficient reduction technique incorporating the sparsity technique and compensation theory is developed. Finally, the proposed method was tested on the Taipower system, which is the only power system in Taiwan. The results obtained confirm the validity and accuracy of the proposed method, and hence demonstrate the superiority and potential of the direct method in real power system applications.     

加载单极子天线的时域辐射特性

基本的单极子天线由于其本身的特社会在天线内部对馈入的信号进行多次反射，严重,制约着它的辐射性能。采用时域有限差分法对比计算了加载与非加载单极子天线的时域辐射特性。计算结果表明，加载是改善单极子天线时域辐射性能的最佳选择，但需要以牺牲辐射效率为代价。     

Dynamics of novel hydrogen-bonded acidic fluorinated poly(amide-imide-silica) hybrids studied by solid-state NMR

Novel hydrogen-bonded acidic fluorinated poly(amide-imide-silica) hybrid materials, FPAI-SiO₂ (6E and 6F) series, were synthesized by a sol-gel process. The structures and spin relaxation of the hybrids were characterized by infrared (IR), and ²⁹Si and ¹³C nuclear magnetic resonance (NMR) spectroscopy. The abundant Q⁴ structures implied that in free catalyst the degree of condensation of tetramethoxysilane was enhanced by hydrogen-bonded acidic fluorinated poly(amide-imide). The dynamics on the local mobility of the hybrids was investigated by the time constant for energy exchange between ¹H and ²⁹Si spin system (T_SiH) and spin-diffusion path length (L) measurements. It was found that the faster T_SiH of 6E and 6F hybrids compared with the previous study of similar 6C and 6D hybrids implied that 6E and 6F hybrids had more aggregated structures even though the organic terminal segment changed from rigid imide to more flexible amide. The interactions of the charge transfer between donor and acceptor molecules or π-π aromatic stacking may be the dominant factors to affect the structures of 6E and 6F hybrids. Moreover, M¹ and D² segments of 6F hybrids had the same level mobility and the mobility of the 6F hybrids was little improved as the soft and flexible 1,3-bis(3-aminopropyl)-tetramethyl-disiloxane segment was incorporated in the dense structures of 6F hybrids. All of the L values of 6E and 6F hybrids were on the scale of 3.5-4.0 nm. The result also suggested that 6E and 6F hybrids had similar denser structures as 6D hybrids.     

Hyperdynamic circulation of cirrhotic rats: role of substance P and its relationship to nitric oxide

BACKGROUND: It has been suggested that excessive formation of nitric oxide (NO) is responsible for the hyperdynamic circulation observed in portal hypertension. Substance P is a neuropeptide partly cleared by the liver and causes vasodilatation through the activation of the endothelial NO pathway. However, there are no previously published data concerning the plasma level of substance P in cirrhotic rats and its relationship to NO. METHODS: Plasma concentrations of substance P and nitrate/nitrite (an index of NO production) were determined in control rats and cirrhotic rats with or without ascites using an enzyme-linked immununosorbent assay and a colorimetric assay, respectively. In addition, systemic and portal hemodynamics were evaluated by a thermodilution technique and catheterization. RESULTS: Cirrhotic rats with and without ascites had a lower systemic vascular resistance (2.6 +/- 0.2 and 3.9 +/- 0.4 mmHg ml(-1) x min x 100 g body weight, respectively) and higher portal pressure (14.6 +/- 0.6 and 11.3 +/- 1.8 mmHg) than control rats (6.5 +/- 0.3 mmHg x ml(-1) x min x 100 g BW and 6.8 +/- 0.2 mmHg, respectively, P < 0.05), and cirrhotic rats with ascites had the lowest systemic vascular resistance. Plasma levels of nitrate/nitrite progressively increased in relation to the severity of liver dysfunction (control rats, 2.7 +/- 0.5 nmol/ml; cirrhotic rats without ascites, 5.6 +/- 1.3 nmol/ml; cirrhotic rats with ascites, 8.3 +/- 2.2 nmol/ml; P < 0.05). Cirrhotic rats with ascites displayed higher plasma values of substance P (57.7 +/- 5.9 pg/ml) than cirrhotic rats without ascites (37.9 +/- 3.1 pg/ml, P < 0.05) and control rats (30.1 +/- 1.0 pg/ml, P < 0.05). There was no significant difference in plasma substance P values between control rats and cirrhotic rats without ascites (P > 0.05). No correlation was found between plasma levels of substance P and nitrate/nitrite (r = 0.318, P > 0.05). CONCLUSIONS: Excessive formation of NO may be responsible, at least partly, for the hemodynamic derangements in cirrhosis. Although substance P may not participate in the initiation of a hyperdynamic circulation in cirrhosis, it may contribute to the maintenance of the hyperdynamic circulation observed in cirrhotic rats with ascites.     

Rich photoluminescence emission of SnO2–SiO2 composite aerogels prepared with a co-fed precursor sol–gel process

Tin oxide–silica composite aerogels were successfully prepared with a co-fed precursor sol–gel process. The crystallinity of the tin oxide nanoparticles, embedded in the mesoporous SiO₂ network, was improved with increasing the post-reaction thermal treatment temperature. The composite aerogels exhibited a rich photoluminescence (PL) emission contributed by both SnO₂ and SiO₂. The PL peak of 346 nm was from the near band edge emission of the tin oxide nanoparticles, and the ones located at 310 and 476 nm were attributable to the oxygen deficiencies of the silica network. Three more emission peaks, 387, 432, and 522 nm, were observed, with the 387 nm peak contributed by the oxygen vacancies V_O⁺⁺, the 432 nm peak by the Sn interstitials, and the 522 nm peak by the oxygen vacancies V_O⁺, respectively, of the tin oxide nanoparticles. The intensities of these three defect level emissions were found decreased, as compared to that of the near band edge emission, with increasing the post-reaction thermal treatment temperature as the tin oxide crystallinity improved.     

草酸二异辛酯的合成

以酸化膨润土(SO42-/Bentonite)固体酸为催化剂、草酸和异辛醇为原料合成草酸二异辛酯。考察了焙烧温度对催化剂活性的影响。结果表明,焙烧温度为500℃时催化剂活性最好。考察了反应温度、原料配比、催化剂用量和反应时间等因素对酯化反应的影响,确定了最佳酯化反应工艺条件,即n(异辛醇)∶n(草酸)为3.5∶1、w(SO42-/Bentonite)为2.0%、反应温度140℃、反应时间3 h;在该条件下草酸的转化率达到96.4%。催化剂重复使用6次后,草酸的转化率仍可达到94.4%。     

Development of a thermal hydraulic analysis code for gas-cooled reactors with annular fuels

Gas-cooled reactors have been highlighted as a promising option for next generation reactor technology. A thermal hydraulic analysis code for gas-cooled reactors has been developed with a heat transfer model of a block element, which is solved implicitly with the helium energy equation. Validation was carried out through comparison with both experimental and analytical results. A computation module for annular fuel rods has been coupled to the code for comparative analyses of an annular fuel-based block element. At normal operation, the annular fuel shows 80 °C lower peak temperature than the solid fuel for the same power in Japan's high temperature engineering test reactor (HTTR), even though the pressure drop is higher in the annular fuel.     

关于M序列的自相关函数的一点注记

本文讨论了Ｍ序列的自相关性，并证明了：当０＜｜ｔ－２＾ｎ－１｜≤［ｎ－１／２］时，｜ＣＭ（ｔ）｜≤２＾ｎ－１。     

Fracture behaviour of unmodified and rubber-modified epoxies under hydrostatic pressure

The fracture toughness and uniaxial tensile yield strengths of unmodified and CTBN-rubber-modified epoxies were measured under hydrostatic pressure. The purpose of these experiments was to learn how suppressing cavitation in rubber particles affects the deformation mechanisms and the fracture toughness of rubber-modified epoxy. It was found that the cavitation of CTBN-rubber could be suppressed at a relatively low pressure (between 30 and 38 M Pa). With cavitation suppressed, the rubber particles are unable to induce massive shearyielding in the epoxy matrix, and the fracture toughness of the rubber-modified epoxy is no higher than that of the unmodified epoxy in the pressure range studied. Unmodified epoxy shows a brittle-to-ductile transition in fracture toughness test. The reason for this transition is the postponement of the cracking process by applied pressure.Work performed while on a sabbatical leave at the University of Michigan.