Characterization of polyurethane foam prepared by using starch as polyol

Polyurethane foams were prepared using starch as a main component of polyols and their structural, mechanical, and absorbing properties for organic solvents were investigated. Fourier transform infrared spectra showed that urethane linkage was formed by the reactions between ? NCO of diisocyanates and ? OH of polyols. When polyurethane foams were prepared at high molar ratio of ? NCO/? OH, the unreacted ? NCO groups were detected. Also, urea linkage was formed by the reaction between diisocyanate and water, which was used as the foaming agent. The micrographs showed that the polyurethane foams had closed‐cell structure, of which the cell size increased with ? NCO/? OH molar ratio. The density of polyurethane foams increased with molecular weight of polyethylene glycol. The compressive moduli of polyurethane foams increased with ? NCO/? OH molar ratio. Polyurethane foams prepared using toluene‐2,4‐diisocyanate as diisocyanate had the highest modulus, while those prepared using hexamethylene diisocyanate had the lowest modulus. In case of the absorbency for the organic solvents, the polyurethane foams prepared at ? NCO/? OH molar ratio of 0.8 had the maximum absorbency. Among several organic solvents, the absorbency for dimethyl sulfoxide was the highest, while the absorbency for tetrahydrofuran was the lowest. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1544–1553, 2007     

Polymer electrolytes based on poly(ethylene glycol) and cyanoresin

Polymer electrolytes based on a mixed polymer matrix consisting of poly(ethylene glycol) (PEG) and cyanoresins with lithium salt and plasticizer were prepared with an in situ blending process to improve both the mechanical properties and the ionic conductivity (σ). The PEG/lithium perchlorate (LiClO₄) complexes, including blends of cyanoethyl pullulan (CRS) and cyanoethyl poly(vinyl alcohol) (CRV), exhibited higher σ's than a simple PEG/LiClO₄ complex when the blend compositions of CRS/CRV were 5 : 5 or 3 : 7 or than CRV alone. When the CRS/CRV blend was compared with a copolymer of cyanoethyl pullulan and cyanoethyl poly(vinyl alcohol) (CRM) in the same molar ratio, the σ values of the polymer electrolytes containing the CRM copolymer series were slightly higher than those of the CRS/CRV blends containing PEG/LiClO₄ complexes. Moreover, the addition of cyanoresin to PEG/LiClO₄/(ethylene carbonate–propylene carbonate) polymer electrolytes provided better thermal stability and dynamic mechanical properties. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2402–2408, 2007     

Preparation of hydroxyapatite/poly(vinyl alcohol) composite film with uniformly dispersed hydroxyapatite particles using citric acid

Biocompatible hydroxyapatite (HA)/poly(vinyl alcohol) (PVA) composites and their transparent films were prepared by the coprecipitation and solvent casting method. The formation of HA in PVA composite powder was confirmed by the characteristic phosphate bands at 1100–1032 and 565 cm^?1 at FT‐IR spectra, and the weight ratio of HA to PVA was 50/50 examined by TGA. The crystal melting temperature of HA/PVA decreased compared with that of pure PVA. HA/PVA (50/50) composite powder and pure PVA were dissolved in dimethyl sulfoxide to obtain a film with HA/PVA weight ratio of 10/90. To improve HA particles' dispersity, which is one of the major factors affecting the mechanical properties of composite materials, various contents of citric acid were used for the preparation of HA/PVA films. At a citric acid concentration of 5 wt %, HA/PVA film with good dispersity of HA particles was obtained. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Indirect evaluation of the long-term oxidation properties of Al−21Ti−23Cr and Al−37Ti−12Cr coating materials for TiAl alloy

The most pertinent coating materials in the Al−Ti−Cr alloy system to improve the high temperature oxidation resistance of a TiAl alloy, with respect to oxidation properties, resistance to thermal stress, and chemical compatibility, are the two-phase alloys of Al−21Ti−23Cr (L1₂+Cr₂Al) and Al−37Ti−12Cr (γ+TiAlCr). In this study, cyclic oxidation tests at 1000 °C and 1200 °C were performed for the specimens coated with both materials of 10 im thickness. Furthermore, breakaway oxidation caused by the formation of a rutile TiO₂ scale was observed, though both bulk alloys showed very stable oxidation behavior. This phenomenon was resulted from the depleted Al content in the coating layer due to Al₂O₃ oxide growth and interdiffusion with the substrate. Considering the decrease of Al content due to oxide growth, the Al−21Ti−23Cr coating with the initial higher Al content was more effective for long-term oxidation protection of the TiAl alloy. On the other hand, when the Al content changes due to the interdiffusion with the substrate, the Al−37Ti−12Cr coating with a smaller compositional gradient with the TiAl substrate was more effective than the Al−21Ti−23Cr coating. Cyclic oxidation tests at 1000 °C and 1200 °C confirmed that for the longer lifetime of coating materials the initial Al content was more important than the smaller compositional gradient with the substrate. Consequently, the Al−21Ti−23Cr coating was considered as more effective one for the long-term oxidation resistance of TiAl alloys.     

Morphology of corrosion products formed on cobalt and nickel in argon-oxygen-chlorine mixtures at 1000 K

The morphology of corrosion products formed on cobalt and nickel in argonoxygen-chlorine mixtures at 1000 K have been examined using optical microscopy, scanning electron microscopy, and X-ray diffraction. The corrosion products formed under conditions where the oxides are thermodynamically stable consist of porous oxides containing little or no chlorine. This morphology is consistent with a corrosion mechanism involving vapor phase transport of volatile metal chlorides.     

Ultrasonic spray pyrolysis of nano crystalline spinel LiMn2O4 showing good cycling performance in the 3 V range

Spherical lithium manganese oxide spinel was synthesized by an ultrasonic spray pyrolysis method, and has been characterized using X-ray diffraction, scanning electron microscopy, transimission electron microscopy and electrochemical cycling at 3 V regions. The LiMn₂O₄ powders were composed of about 10 nm-sized primary particles. The delivered discharge capacity of the synthesized nano-material was 125 mAh g⁻¹ between 2.4 and 3.5 V and its retention was about 96% upon 50 cycling. From the high resolution transmission electron microscopic study, it was found that structural transition of the parent material did not occur even after the 50th electrochemical cycling on the 3 V region. It seems that the reversible structural change is possible for nanocrystalline LiMn₂O₄ as observed by the X-ray diffraction and transition electron microscopic observations.     

Preparation and barrier property of poly(ethylene terephthalate)/clay nanocomposite using clay‐supported catalyst

Poly(ethylene terephthalate) (PET)/clay nanocomposite was prepared by the direct polymerization with clay‐supported catalyst. The reaction degree of catalyst against the cation exchange capacity of clay was 8 wt %. The intercalation of PET chains into the silicate layers was revealed by X‐ray diffraction studies. SEM morphology of the nanocomposite showed a good dispersion of clay‐supported catalyst, ranging from 30 to 100 nm. The intercalated and exfoliated clay‐supported catalyst in PET matrix was also observed by TEM. The improvement of O₂ permeability for PET/clay‐supported catalyst composite films over the pure PET is approximately factors of 11.3–15.6. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4875–4879, 2006     

Surface characterization of 8‐quinolinyl acrylate‐grafted poly(ethylene terephthalate) prepared by plasma glow discharge and it's antibacterial activity

Poly(ethylene terephthalate) (PET) film was exposed to oxygen plasma glow discharge to produce peroxides on its surface. These peroxides were then used as catalysts for the polymerization of 8‐quinolinyl acrylate (QA) to prepare the PET grafted with QA (PET‐Q). The surface‐modified PET was characterized by attenuated total reflection Fourier transform infrared spectroscopy (ATR‐FTIR) and X‐ray photoelectron spectroscopy (XPS). The introduction of QA to the PET surface was confirmed by observing the presence of nitrogen in the XPS survey scan and high‐resolution spectra. The amount of QA grafted on to the PET surface as measured by the gravimetric method was about 5.2 μg cm^?2. The antibacterial activity of the surface‐modified PET texture was investigated by using a shake‐flask and an inhibition zone test method. After 6 h of shaking, the PET grafted with QA showed the inhibition (91%) of the growth of the gram‐positive microorganism, S. aureus. Even after laundering ten times, an effectiveness of the inhibition was found. However, little inhibition was shown with the gram‐negative microorganism, K. pneumoniae. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 863–868, 2006     

Novel Sn–Ce/Al2O3 Catalyst for the Selective Catalytic Reduction of NOx Under Lean Conditions

Effect of additives, Ce and Mn, on the catalytic performance of Sn/Al₂O₃ catalyst prepared by sol–gel method for the selective reduction of NO_x with propene under lean conditions was studied. Sn–Ce/Al₂O₃ catalysts exhibited higher activity than Sn/Al₂O₃ catalyst and the optimum Ce loading is 0.5–1%. The promoting effect of Ce is to enhance the oxidation of NO to NO₂ and facilitate the activation of propene, both of which are important steps for the NO_x reduction. The presence of oxygen contributes to the oxidation of NO and shows a promoting effect.     

Unsteady extinction mechanism of nonpremixed flame interacting with a vortex

The extinction mechanism of a CH₄/N₂-air counterflow nonpremixed flame interacting with a single vortex was numerically studied. An augmented reduced mechanism was used to treat the CH₄ oxidation reactions. The contribution of each term in the energy and the OH species equations were evaluated to investigate the unsteady extinction mechanism of nonpremixed flame. The flame temperature began to decrease due to the convection heat loss when the flame interacted with a vortex. The investigation of the radical behavior during the flame-vortex interaction process also provided useful information on the unsteady extinction mechanism. The OH radical concentration could be used as a good tracer of the state of the unsteady extinction of nonpremixed flame. The reduction mechanism of OH concentration was confirmed by analyzing the contribution of each term in the OH species equation. At initial stage of flame-vortex interaction, the OH production and consumption rates increased gradually, while the OH concentration was kept nearly constant. Near the extinction limit, the OH production rate decreased rapidly due to the low flame temperature, and the balance between the OH production and OH consumption by diffusion could not be maintained. The unsteady nonpremixed flame interacting with a vortex under the conditions of regime (V) shown in the spectral combustion diagram [Thévenin, D., Renard, P.H., Fiechtner, G.J., Gord, J.R., Rolon, J.C., 2000. Regimes of non-premixed flame-vortex interactions. Proceedings of the Combustion Institute 28, 2101-2108.] was finally extinguished due to low reactivity, which was induced by the low flame temperature.