A Brief Introduction on Joint Radar and Communication Systems

Joint radar and communication(JRC) technology is gradually becoming an essential approach to alleviating spectral congestion. Radar and communications systems were designed with common spectral and hardware resources to reduce size, improve performance, reduce cost, and decongest the spectrum. Various approaches have been proposed to achieve the coexistence of radar and communication systems. This paper mainly focuses on the research directions of radar communication coexistence(RCC) and dual-function radar communication systems(DFRC) in JRC technology. We summarize and analyze the existing research problems in the JRC era. According to the characteristics and advantages of JRC technology, we highlight several potentials in military and commercial applications.     

不同条件下尼龙材料光老化行为的研究

目前,氙灯加速老化试验是评估材料耐候效果最常用的一种方法。但是,关于该测试方法是否能客观反应材料实际使用过程中的颜色、力学变化规律的相关数据积累非常少。详细对比了两种测试条件对材料耐候效果的影响,结果表明,在定性评估方面,不同耐候剂组合在两种老化试验中的优劣顺序基本上保持一致,说明氙灯加速老化试验可以比较客观地反映材料在自然使用过程中的颜色变化;而定量方面,在老化初期,两种测试方法的结果比较接近;而随着老化时间的增长,氙灯老化条件下材料的色差开始呈现指数型增长,远远高于户外自然老化。造成上述现象的原因可能包括两点,一是氙灯老化测试时的温度更高,树脂和色粉等更容易发生降解;二是材料表面的耐候剂在氙灯测试中消耗过快,内部的耐候剂无法及时补充,因此造成自由基大量生成,导致老化加速进行。     

Adenovirus-Mediated Inducible Expression of a PD-L1 Blocking Antibody in Combination with Macrophage Depletion Improves Survival in a Mouse Model of Peritoneal Carcinomatosis

Immune checkpoint inhibitors (ICIs) have demonstrated remarkable efficacy in a growing number of malignancies. However, overcoming primary or secondary resistances is difficult due to pharmacokinetics issues and side effects associated with high systemic exposure. Local or regional expression of monoclonal antibodies (mAbs) using gene therapy vectors can alleviate this problem. In this work, we describe a high-capacity adenoviral vector (HCA-EFZP-aPDL1) equipped with a mifepristone-inducible system for the controlled expression of an anti-programmed death ligand 1 (PD-L1) blocking antibody. The vector was tested in an immune-competent mouse model of colorectal cancer based on implantation of MC38 cells. A single local administration of HCA-EFZP-aPDL1 in subcutaneous lesions led to a significant reduction in tumor growth with minimal release of the antibody in the circulation. When the vector was tested in a more stringent setting (rapidly progressing peritoneal carcinomatosis), the antitumor effect was marginal even in combination with other immune-stimulatory agents such as polyinosinic-polycytidylic acid (pI:C), blocking mAbs for T cell immunoglobulin, mucin-domain containing-3 (TIM-3) or agonistic mAbs for 4-1BB (CD137). In contrast, macrophage depletion by clodronate liposomes enhanced the efficacy of HCA-EFZP-aPDL1. These results highlight the importance of addressing macrophage-associated immunoregulatory mechanisms to overcome resistance to ICIs in the context of colorectal cancer.     

NiAl金属间化合物的热爆合成过程研究

以Al粉和Ni粉为主要原料，采用自蔓延高温合成技术，制备Ni—Al基金属间化合物。绘制了热爆反应曲线、描述了热爆反应的过程，分析了热爆反应机理及产物的显微组织特征，研究了热爆反应的边界条件以及各种反应参数对热爆反应的影响。研究结果表明，升温速率和颗粒尺寸对热爆反应均有不同程度的影响。提高升温速率、减小颗粒尺寸均可缩短热爆反应的起始时间，降低热爆反应的起始温度。初步确定了反应起始温度低于Ni—Al系的最低共晶温度（640℃），Ni—A1系的热爆反应是由固一固扩散反应引发的，Ni-32Al的反应产物为单相、均一的NiAl相。     

数控小孔冲床网眼平板加工中的波浪纹缺陷成因分析及排除

文章就数控小孔冲床加工纺织烘干设备中帘子网眼平板产生波浪纹缺陷的原因,进行了全面、详细的理论分析.在排除机床、模具精度影响的基础上,针对压料机构运动误差产生的机理和不利影响,详细分析了网眼冲孔加工产生波浪纹缺陷的根本原因,提出了相应的改进措施,在实践中具有良好的实用效果.     

Influence of the stress,strain, and temperature on the surface roughness of an AlSl 52100 steel due to an orthogonal cut

In recent years, the finite element method (FEM) has become the main tool for simulating the metal cutting process because research based on trial and error is time consuming and requires high investment. Early studies were done by different investigators. In this research AISI 52100, hardened steel (62 HRC) was selected for an orthogonal machining process as well as metal cutting simulation using the software DEFORM-2D. This software is based on a forging process and has been adapted to an orthogonal machining process. The results of simulated cutting forces were compared with experimental cutting force data to validate the orthogonal cut simulation. Also, the surface roughness was measured, and the influence of the stress, strain, and temperature on the surface roughness was studied.     

N-甲酰吗啉芳烃抽提塔试验研究

用小型碳钢筛板萃取塔进行了宽馏分重整脱庚烷油的N 甲酰吗啉抽提试验 ,考察了抽提温度、溶剂比、溶剂含水率对总芳烃收率及选择性的影响。结果表明 ,在抽提温度为 60℃、溶剂含水为 3 % (m )和溶剂比S/F =4(V)的抽提操作条件下 ,溶剂选择性较高 ,并可获得高的芳烃回收率     

泡沫陶瓷的研制

泡沫陶瓷是一种新型的功能陶瓷材料。它具有独特的结构和性能，在工业中有着广泛的应用前景。泡沫陶瓷具有密度小、透气性高、耐高温、抗化学腐蚀等特性。本研究对用颗粒强化的氧化铝骨架合成泡沫陶瓷进行了分析。这种材料比其它多孔陶瓷材料具有更好的热化学性质。这种材料可以用有机海绵浸浆获得，然后烧去海绵，留下多孔陶瓷网。这种方法的优点是它包含了过程参数和陶瓷结构，同时合成物的烧结情况及其它条件的影响在文中也有阐述。