Sensory Threshold Studies of Picrocrocin,the Major Bitter Compound of Saffron

This study is part of a wider project on the bitter taste of saffron and its preparations. A deeper knowledge on the taste perception of picrocrocin is necessary in order to develop products that satisfy consumer senses and provide them with adequate amounts of saffron major constituents, also appreciated for bioactivity. A systematic approach on the bitterness of picrocrocin, the major responsible compound, was conducted. A panel was trained specifically for the determination of taste detection and recognition thresholds of picrocrocin, which were found to be 5.34 and 7.26 mg/L, respectively, using the Ascending Forced Choice of Limits methodology. The threshold values were examined in water in absence and presence of other saffron constituents and ethanol and were found to decrease when served hot (61 ± 4 °C). Bitterness was enhanced in 40% (v/v) aqueous ethanol. In both aqueous and ethanol extracts, the presence of saffron volatiles improved bitterness perception. The usefulness of the study was tested in the case of commercial saffron based infusions.     

Effect of branched PP content on the physical properties and cell growth during foaming of TPOs

Linear/branched PP blends at various ratios were used as the matrix for thermoplastic olefin (TPO) compounds, containing an ethylene–octene copolymer dispersed phase. A detailed investigation of the physical properties of these blends revealed that addition of branched PP (BPP) resulted in improved stiffness and flexural properties. Given that the phase morphology of the blends and the interfacial tension between their components remained virtually unaffected, these improvements are attributed to the higher stiffness of the BPP‐containing matrices. Talc‐filled TPOs containing branched PPs exhibited further improvements in the stiffness and flexural properties. An investigation into the bubble growth process during foaming using a batch foaming simulation system revealed that the presence of BPP resulted in a slight delay in cell nucleation, whereas the rate of bubble growth was not significantly altered. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Study of physicochemical properties of two current commercial dental self‐curing resin composites

The aim of the present work is the study of some physicochemical properties of two current commercial dental self‐curing two component composites, i.e., of Concise? (3M?, Dental Products, St. Paul, USA), and Alfacomp (VOCO GmbH, Germany). Based on their filler type Concise is characterized as “conventional” or “macrofilled” composite and Alfacomp as “hybrid.” The resin matrix of Concise is a copolymer of 2‐bis[4‐2‐hydroxy‐3‐(methacryloxy)‐propyl]phenyl propane (Bis‐GMA)/triethyleneglycol dimethacrylate, while that of Alfacomp a homopolymer of Bis‐GMA. The composites were prepared in accordance with the manufacturers' instructions by mixing equal amounts of the two components at room temperature. The degree of conversion of double bonds of resin matrix during curing was determined in thin film of composites using FTIR transmission spectroscopy. The degree of conversion of Concise and Aflacomp was found to be correspondingly (73.63 ± 4.33)% and (47.75 ± 1.80)% after a day‐polymerization. Sorption, solubility, and volumetric change were determined after storage of composites in water or ethanol/water solution 75 vol % at 37°C (a good food/oral simulating fluid) for 30 days. These properties for both composites were higher in ethanol/water solution than in water. Also these properties for Concise were lower than those for Alfacomp in both liquids. Thermal stability of composites was studied by thermogravimetric analysis which performed in air atmosphere from 50 to 800°C. This analysis of composites showed the degradation of their resin matrix in three steps. The organic resin content of Concise was found to be 18.0% w/w and that of Alfacomp 20.1% w/w. Concise showed generally better properties than Alfacomp. This behavior must due to the differences in the chemical structure of the organic resin matrix and the type of inorganic filler. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Colour and fastness of natural dyes: revival of traditional dyeing techniques

Cotton and wool fabrics were dyed with nine natural dyes obtained by aqueous extraction of the original plants/insect in an attempt to reconstruct traditional textile dyeing recipes, to optimise the methodology at all stages, i.e. extraction, mordanting and dyeing, and to standardise it. Cochineal, madder, alkanna, henna, brazilwood, red sandalwood, safflower, indigo and logwood were used for the dyeings, which were carried out directly and after mordanting of the textile material. A variety of mordants, namely, aluminium potassium sulphate, potassium dichromate, copper sulphate, zinc chloride, iron(iii ) chloride, iron(ii ) sulphate and tin chloride, is anticipated to meet both early and recent requirements and options. The dyeings were evaluated through colour measurements and standard wash, light and rub fastness tests. Generally, the mordanting process known for many centuries and connected with the textile dyeing resulted in an improvement in dye absorption and fastness properties mainly for the cotton samples, as is concluded from the tests and measurement assessments.     

Influence of electrolyte co-additives on the performance of dye-sensitized solar cells

The presence of specific chemical additives in the redox electrolyte results in an efficient increase of the photovoltaic performance of dye-sensitized solar cells (DSCs). The most effective additives are 4-tert-butylpyridine (TBP), N-methylbenzimidazole (NMBI) and guanidinium thiocyanate (GuNCS) that are adsorbed onto the photoelectrode/electrolyte interface, thus shifting the semiconductor's conduction band edge and preventing recombination with triiodides. In a comparative work, we investigated in detail the action of TBP and NMBI additives in ionic liquid-based redox electrolytes with varying iodine concentrations, in order to extract the optimum additive/I₂ ratio for each system. Different optimum additive/I₂ ratios were determined for TBP and NMBI, despite the fact that both generally work in a similar way. Further addition of GuNCS in the optimized electrolytic media causes significant synergistic effects, the action of GuNCS being strongly influenced by the nature of the corresponding co-additive. Under the best operation conditions, power conversion efficiencies as high as 8% were obtained.     

The role of non-covalent interactions and matrix viscosity on the dispersion and properties of LLDPE/MWCNT nanocomposites

Linear low density polyethylene (LLDPE)/multi-walled carbon nanotube (MWCNT) composites were prepared by melt compounding, following two different compatibilization strategies that involved non-covalent interactions between the matrix and the filler. The first approach involved grafting pyridine aromatic moieties on the maleated polyolefin backbone, which are able to interact by π–π stacking with the surface of the nanotubes. The second method implemented non-covalent/non-specific surface functionalization of the MWCNTs with a hyperbranched polyethylene (HBPE). The enhanced interfacial interactions established in the composites containing LLDPE functionalized with pyridine grafts improved the dispersion of the nanotubes within the polymer matrix. Dispersion was also favoured by higher matrix viscosity. Composites containing finely dispersed MWCNTs exhibited an increase in the rheological and electrical percolation thresholds, and a significant improvement in mechanical properties. On the contrary the composites based on the low viscosity matrix contained large amounts of aggregates, which promoted lower percolation thresholds. Manipulation of matrix viscosity and compatibilization resulted in composites with good mechanical properties, and low percolation thresholds.     

The job demands-resources model of burnout.

The job demands-resources (JD-R) model proposes that working conditions can be categorized into 2 broad categories, job demands and job resources, that are differentially related to specific outcomes. A series of LISREL analyses using self-reports as well as observer ratings of the working conditions provided strong evidence for the JD-R model: Job demands are primarily related to the exhaustion component of burnout, whereas (lack of) job resources are primarily related to disengagement. Highly similar patterns were observed in each of 3 occupational groups: human services, industry, and transport (total N?=?374). In addition, results confirmed the 2-factor structure (exhaustion and disengagement) of a new burnout instrument—the Oldenburg Burnout Inventory—and suggested that this structure is essentially invariant across occupational groups. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Workaholism and relationship quality: A spillover-crossover perspective.

This study of 168 dual-earner couples examined the relationship between workaholism and relationship satisfaction. More specifically, on the basis of the literature, it was hypothesized that workaholism is positively related to work-family conflict. In addition, the authors predicted that workaholism is related to reduced support provided to the partner, through work-family conflict, and that individuals who receive considerable support from their partners are more satisfied with their relationship. Finally, the authors hypothesized direct crossover of relationship satisfaction between partners. The results of structural equation modeling analyses using the matched responses of both partners supported these hypotheses. Moreover, in line with predictions, the authors found that gender did not affect the strength of the relationships in the proposed model. The authors discuss workplace interventions as possible ways to help workaholics and their partners. (PsycINFO Database Record (c) 2010 APA, all rights reserved)