Effect of the compatibilizing agent on the structure,mechanical and thermal properties of polylactide filled with modified and unmodified montmorillonite

Polylactide (PLA) nanocomposites were prepared by an extrusion technique using a twin‐screw extruder. Nanofil2 (N) and montmorillonite (MMT) K10 (S) were used as nanoclays. To improve the nanoclay dispersion in the PLA matrix, a compatibilizer was introduced [poly(ε‐caprolactone) (K)]. The structure and morphology of obtained materials were determined using X‐ray diffraction technique and transmission electron microscopy. Thermal properties of nanocomposites were reviewed based on differential scanning calorimetry and differential thermogravimetry. Mechanical properties such as tensile stress and tensile strength were also studied. The introduction of layered silicates without a compatibilizer into PLA matrix did not improve the mechanical properties of the obtained nanocomposites. This research indicated that the compatibilizing agent can be used to improve the dispersion of Nanofil2 nanofiller, which resulted in the improvement of mechanical properties and at the same time did not affect the dispersion of the unmodified MMT. POLYM. COMPOS., 35:1330–1337, 2014. © 2013 Society of Plastics Engineers     

Retention of nitrogen from ground barley grain supplemented with lucerne or barley leaf juice in long-term balance experiments conducted with rats

The biological value (BV) and true digestibility of lucerne and barley juice protein mixed with ground barley grain were estimated using the Thomas-Mitchell balance method with rats. The BV with forage barley juice protein was similar to that of barley grain protein alone and was not improved by any of the applied treatments. The BV with lucerne juice protein was lower and was improved by separating the ‘brown juice’ after heat coagulation. Better results were obtained in a group fed diets with lowered levels of potassium and calcium which suggested an imbalance in the mineral content of lucerne juice; there was no difference in water consumption. The haemoglobin content of the blood of rats fed lucerne or barley juice alone was lower than that of animals fed plant juice/barley grain mixtures. No pathological lesions were observed in the guts, kidneys and livers of the rats.     

TET3- and OGT-Dependent Expression of Genes Involved in Epithelial-Mesenchymal Transition in Endometrial Cancer

TET3 is a member of the TET (ten-eleven translocation) proteins family that catalyzes the conversion of the 5-methylcytosine into 5-hydroxymethylcytosine. TET proteins can also affect chromatin modifications and gene expression independently of their enzymatic activity via interactions with other proteins. O-GlcNAc transferase (OGT), the enzyme responsible for modification of proteins via binding of N-acetylglucosamine residues, is one of the proteins whose action may be dependent on TET3. Here, we demonstrated that in endometrial cancer cells both TET3 and OGT affected the expression of genes involved in epithelial to mesenchymal transition (EMT), i.e., FOXC1, TWIST1, and ZEB1. OGT overexpression was caused by an increase in TWIST1 and ZEB1 levels in HEC-1A and Ishikawa cells, which was associated with increased O-GlcNAcylation of histone H2B and trimethylation of H3K4. The TET3 had the opposite effect on gene expressions and histone modifications. OGT and TET3 differently affected FOXC1 expression and the migratory potential of HEC-1A and Ishikawa cells. Analysis of gene expressions in cancer tissue samples from endometrial cancer patients confirmed the association between OGT or TET3 and EMT genes. Our results contribute to the knowledge of the role of the TET3/OGT relationship in the complex mechanism supporting endometrial cancer progression.     

Mg2FeH6–LiBH4 and Mg2FeH6–LiNH2 composite materials for hydrogen storage

Two composite hydrogen storage materials based on Mg₂FeH₆ were investigated for the first time. The Mg₂FeH₆–LiBH₄ composite of molar ratio 1:5 showed a hydrogen desorption capacity of 5.6 wt.% at 370 °C, and could be rehydrogenated to 3.6 wt.% with the formation of MgH₂, as the material was heated to 445 °C and held at this temperature. The Mg₂FeH₆–LiNH₂ composite of 3:10 molar ratio exhibited a hydrogen desorption capacity of 4.3 wt.% and released hydrogen at 100 °C lower then the Mg₂FeH₆–LiBH₄ composite, but this mixture could not be rehydrogenated. Compared to neat Mg₂FeH₆, both composites show enhanced hydrogen storage properties in terms of desorption kinetics and capacity at these low temperatures. In particular, Mg₂FeH₆–LiNH₂ exhibits a much lower desorption temperature than neat Mg₂FeH₆, but only Mg₂FeH₆–LiBH₄ re-absorbs hydrogen.     

Role of Polyinosinic:Polycytidylic Acid-Induced Maternal Immune Activation and Subsequent Immune Challenge in the Behaviour and Microglial Cell Trajectory in Adult Offspring: A Study of the Neurodevelopmental Model of Schizophrenia

Multiple lines of evidence support the pathogenic role of maternal immune activation (MIA) in the occurrence of the schizophrenia-like disturbances in offspring. While in the brain the homeostatic role of neuron-microglia protein systems is well documented, the participation of the CX3CL1-CX3CR1 and CD200-CD200R dyads in the adverse impact of MIA often goes under-recognized. Therefore, in the present study, we examined the effect of MIA induced by polyinosinic:polycytidylic acid (Poly I:C) on the CX3CL1-CX3CR1 and CD200-CD200R axes, microglial trajectory (MhcII, Cd40, iNos, Il-1β, Tnf-α, Il-6, Arg1, Igf-1, Tgf-β and Il-4), and schizophrenia-like behaviour in adult male offspring of Sprague-Dawley rats. Additionally, according to the “two-hit” hypothesis of schizophrenia, we evaluated the influence of acute challenge with Poly I:C in adult prenatally MIA-exposed animals on the above parameters. In the present study, MIA evoked by Poly I:C injection in the late period of gestation led to the appearance of schizophrenia-like disturbances in adult offspring. Our results revealed the deficits manifested as a diminished number of aggressive interactions, presence of depressive-like episodes, and increase of exploratory activity, as well as a dichotomy in the sensorimotor gating in the prepulse inhibition (PPI) test expressed as two behavioural phenotypes (MIA_PPI-low and MIA_PPI-high). Furthermore, in the offspring rats subjected to a prenatal challenge (i.e., MIA) we noticed the lack of modulation of behavioural changes after the additional acute immune stimulus (Poly I:C) in adulthood. The important finding reported in this article is that MIA affects the expression and levels of the neuron-microglia proteins in the frontal cortex and hippocampus of adult offspring. We found that the changes in the CX3CL1-CX3CR1 axis could affect microglial trajectory, including decreased hippocampal mRNA level of MhcII and elevated cortical expression of Igf-1 in the MIA_PPI-high animals and/or could cause the up-regulation of an inflammatory response (Il-6, Tnf-α, iNos) after the “second hit” in both examined brain regions and, at least in part, might differentiate behavioural disturbances in adult offspring. Consequently, the future effort to identify the biological background of these interactions in the Poly I:C-induced MIA model in Sprague-Dawley rats is desirable to unequivocally clarify this issue.     

Dithizone modified gold nanoparticles films for potentiometric sensing

For the first time, application of a membrane composed of gold nanoparticles decorated with complexing ligand for potentiometric sensing is shown. Gold nanoparticles drop cast from a solution form a porous structure on a substrate electrode surface. Sample cations can penetrate the gold nanoparticles layer and interact with ligand acting as a charged ionophore, resulting in Nernstian potentiometric responses. Anchoring of complexing ligand on the gold surface abolishes the necessity of ionophore application. Moreover, it opens the possibility of preparation of potentiometric sensors using chelators of significantly different selectivity patterns further enhanced by the absence of polymeric membrane matrix. This was clearly seen, for example, for gold nanoparticles stabilizing the applied ligand-dithizone-thiol conformation leading to a high potentiometric selectivity toward copper ions, much higher than that of ionophores typically used to induce selectivity for polymeric ion-selective membranes.     

The effect of cooking on the glucosinolates content in white cabbage

The effect of different cooking times on the GLS content in white cabbage (Brassica oleracea L. var. capitata f. alba) was determined. Cooking of cabbage for 5-30 min caused a gradual decrease in the GLS content. The most efficient reduction of the GLS content (by about 35%) occurred during the first minutes of cooking. As the cooking time was extended by another 5 min, each time the GLS content decreased by 10-15%. Higher losses in indole GLS, as compared to those of aliphatic ones, resulted from more efficient diffusion of those compounds to cooking water. The GLS content in cooking water, irrespective of the cooking time of white cabbage, remained rather stable, whereas the content of indole GLS was between 3.5- and 4-fold higher in comparison to that of aliphatic GLS. Taking into consideration the rate of changes in the content of particular GLS in cabbage and the GLS content in cooking water, it can be stated that glucoiberin was more thermolabile than other GLS.     

Study of self-stratifying compositions

Paint applied as a single layer, and its spontaneous separation to form a primer and a top coat, is one of the newest concepts of the effective and economical application of two layers in one step. The influence of the molecular weight of epoxy oligomer and acrylic polymer and their ratio on self-stratification was investigated. The degree of stratification depending on molecular weight and their mutual ratio was determined using ATR-FTIR spectroscopy, differential scanning calorimetry, microscopy techniques, adhesion tests, and surface tension measurements. Phase separation and self-stratification of two-component homogenous mixtures were followed using FTIR technique and surface tension measurements. As a result of these investigations, optimal oligomeric/polymeric composition was selected. The obtained coating system showed good mechanical properties, gloss, and interlayer adhesion.