Investigation of the degree of crystallinity of acrylonitrile-divinylbenzene copolymers

Using the wide-angle X-ray scattering method, the degree of crystallinity of suspension copolymers and terpolymers of acrylonitrile (AN) and divinylbenzene (DVB) were determined. Copolymers with various degrees of cross-linking (5%–50% DVB) were prepared in the presence of thermodynamically different solvents added in order to obtain porous structure. It was found that copolymers with a degree of cross-linking of 0.1% DVB have a crystallinity index below 0.2, although the crystallinity index of PAN obtained under the same conditions is 0.5. Owing to the solvation conditions, even in copolymers with a degree of cross-linking of 20% DVB, ordered regions occur, and dilution of the polymerization mixture with poor solvents cause a decrease in the degree of crystallinity of these copolymers. Terpolymers AN, butyl acrylate (BA) or vinyl acetate (VA) have less ordered structure for the same amount of DVB. Methacrylonitrile and DVB copolymers obtained under the same conditions as AN and DVB are amorphous.     

Picosecond thermal pulses in thin gold films

In this paper it has been shown that, with the advent of lasers with a very short pulse duration, the effect of thermal wave propagation becomes important. To consider this effect, hyperbolic heat conduction in thin gold films was studied. It was shown that for heat fluxes of the order 10⁸ W·cm^–2, a thermal wave is generated in thin gold films. The consideration of the hyperbolicity of heat transfer enables one to describe the temperature profile with one value of fluence.     

Biofunctionalized upconverting CaF<Subscript>2</Subscript>:Yb,Tm nanoparticles for <Emphasis Type="Italic">Candida albicans</Emphasis> detection and imaging

Versatile optimization of the synthesis method and composition of Yb3+ and Tm3+ co-doped CaF2 nanoparticles as well as a novel biofunctionalization method were developed and evaluated.Through multistep synthesis,the luminescence intensity of the Tm3+ activator was enhanced by more than 10-fold compared to standard one-step synthesis.The proposed methods were used to homogenously distribute the doping ions within the nanoparticle's volume and thus reduce luminescence quenching.Optimization of dopant ions concentration led to the selection of the most efficient visible and near-infrared up-converting nanoparticles,which were CaF2 doped with 10％ Yb3+ 0.05％ Tm3+ and 20％ Yb3+ 0.5％ Tm3+,respectively.To illustrate the suitability of the synthesized nanoparticles as bio-labels,a dedicated biofunctionalization method was used,and the nanoparticles were applied for labeling and imaging of Candida albicans cells.This method shows great promise because of extremely low background and high specificity because of the presence of the attached molecules.     

Recent progress in continuous and semi-continuous processing of solid oral dosage forms: a review

Context: Continuous processing is an innovative production concept well known and successfully used in other industries for many years. The modern pharmaceutical industry is facing the challenge of transition from a traditional manufacturing approach based on batch-wise production to a continuous manufacturing model.

Objective: The aim of this article is to present technological progress in manufacturing based on continuous and semi-continuous processing of the solid oral dosage forms.

Methods: Single unit processes possessing an alternative processing pathway to batch-wise technology or, with some modification, an altered approach that may run continuously, and are thus able to seamlessly switch to continuous manufacturing are briefly presented. Furthermore, the concept of semi-continuous processing is discussed. Subsequently, more sophisticated production systems created by coupling single unit processes and comprising all the steps of production, from powder to final dosage form, were reviewed. Finally, attempts of end-to-end production approach, meaning the linking of continuous synthesis of API from intermediates with the production of final dosage form, are described.

Results: There are a growing number of scientific articles showing an increasing interest in changing the approach to the production of pharmaceuticals in recent years. Numerous scientific publications are a source of information on the progress of knowledge and achievements of continuous processing. These works often deal with issues of how to modify or replace the unit processes in order to enable seamlessly switching them into continuous processing. A growing number of research papers concentrate on integrated continuous manufacturing lines in which the production concept of “from powder to tablet” is realized. Four main domains are under investigation: influence of process parameters on intermediates or final dosage forms properties, implementation of process analytical tools, control-managing system responsible for keeping continuous materials flow through the whole manufacturing process and the development of new computational methods to assess or simulate these new manufacturing techniques. The attempt to connect the primary and secondary production steps proves that development of continuously operating lines is possible.

Conclusion: A mind-set change is needed to be able to face, and fully assess, the advantages and disadvantages of switching from batch to continuous mode production.     

Magnetic Ordering of Dy3+ Ions in RbDy(WO4)2 Single Crystal

The specific heat C(T) of the monoclinic RbDy(WO ₄ ) ₂ crystal has been studied at very low temperatures 0.2T1.9 K and in magnetic fields 0H0.38 T. The Neel temperature was shown to be equal to T_N = 0.818 ± 0.005 K. The experimental value of the effective exchange parameter was obtained to be equal to J/k = – 0.798 K. The C T) dependence below Neel temperature 0.5T_N0.99T_N ) is well described by 2D Ising model, whereas in the temperature region close above T_N (1.01 T_N2T_N) it can be described by neither 2D, nor 3D Ising model. The experimental and theoretical H-T_N diagrams for field H a are in a reasonable agreement for simple quadratic lattice.     

Flexible multibody approach in forward dynamic simulation of locomotive strains in human skeleton with flexible lower body bones

A method for bone strain estimation is examined in this article. The flexibility of a single bone in an otherwise rigid human skeleton model has been studied previously by various authors. However, in the previous studies, the effect of the flexibility of multiple bones on the musculoskeletal model behavior was ignored. This study describes a simulation method that can be used to estimate the bone strains at both tibias and femurs of a 65-year-old Caucasian male subject. The verification of the method is performed by the comparison of the results with other studies available in literature. The results of the study show good correlation with the results of previous empirical studies. A damping effect of the flexible bones on the model is also studied in this paper.