Clarification of a wheat straw‐derived medium with ion‐exchange resins for xylitol crystallization

BACKGROUND: Xylitol bioproduction from lignocellulosic residues comprises hydrolysis of the hemicellulose, detoxification of the hydrolysate, bioconversion of the xylose, and recovery of xylitol from the fermented hydrolysate. There are relatively few reports on xylitol recovery from fermented media. In the present study, ion‐exchange resins were used to clarify a fermented wheat straw hemicellulosic hydrolysate, which was then vacuum‐concentrated and submitted to cooling in the presence of ethanol for xylitol crystallization. RESULTS: Sequential adsorption into two anion‐exchange resins (A‐860S and A‐500PS) promoted considerable reductions in the content of soluble by‐products (up to 97.5%) and in medium coloration (99.5%). Vacuum concentration led to a dark‐colored viscous solution that inhibited xylitol crystallization. This inhibition could be overcome by mixing the concentrated medium with a commercial xylitol solution. Such a strategy led to xylitol crystals with up to 95.9% purity. The crystallization yield (43.5%) was close to that observed when using commercial xylitol solution (51.4%). CONCLUSION: The experimental data demonstrate the feasibility of using ion‐exchange resins followed by cooling in the presence of ethanol as a strategy to promote the fast recovery and purification of xylitol from hemicellulose‐derived fermentation media. Copyright © 2008 Society of Chemical Industry     

3D Hair sketching for real-time dynamic & key frame animations

Physically based simulation of human hair is a well studied and well known problem. But the “pure” physically based representation of hair (and other animation elements) is not the only concern of the animators, who want to “control” the creation and animation phases of the content. This paper describes a sketch-based tool, with which a user can both create hair models with different styling parameters and produce animations of these created hair models using physically and key frame-based techniques. The model creation and animation production tasks are all performed with direct manipulation techniques in real-time.     

A rubber-modified thermoplastic where the morphology produced by phase-separation induced by polymerization disappears at high conversions

An unexpected experimental finding is reported where the primary morphology developed during polymerization-induced phase separation in a rubber-modified thermoplastic practically disappears at high conversions. This process was evidenced by light scattering (LS) and scanning electron microscopy (SEM) for a particular composition of solutions of polyisobutylene oligomers (PIB) in isobornylmethacrylate (IBoMA), during the free-radical polymerization of the monomer. The primary phase separation produced a dispersion of domains rich in PIB containing significant amounts of the monomer (IBoMA). Polymerization of the monomer in these domains occurred at high overall conversions producing the filling of dispersed domains with a PIBoMA-PIB blend that could not be distinguished from the matrix. Under these conditions the final material had the appearance of a homogeneous blend.     

Thermal degradation of cinnamoylated poly(vinyl alcohol)

Thermogravimetry and pyrolysis in combination with gas chromatography and infrared spectroscopy were the experimental techniques applied to the thermal degradation of cinnamoylated poly(vinyl alcohol) samples, constituted from vinyl alcohol-vinyl cinnamate photocrosslinkable copolymers. The thermal decomposition products include gases, liquids and solids. The gases are formed from saturated and unsaturated volatile hydrocarbons C₁? C₄, carbon monoxide and carbon dioxide. The liquid fraction includes aromatic hydrocarbons and some oxygenated organic compounds. The solid product identified in the greatest amount was cinnamic acid. The content in the thermal decomposition products varies considerably both with copolymer composition and temperature.     

Efficient reconstruction from non-uniform point sets

We propose a method for non-uniform reconstruction of 3D scalar data. Typically, radial basis functions, trigonometric polynomials or shift-invariant functions are used in the functional approximation of 3D data. We adopt a variational approach for the reconstruction and rendering of 3D data. The principle idea is based on data fitting via thin-plate splines. An approximation by B-splines offers more compact support for fast reconstruction. We adopt this method for large datasets by introducing a block-based reconstruction approach. This makes the method practical for large datasets. Our reconstruction will be smooth across blocks. We give reconstruction measurements as error estimations based on different parameter settings and also an insight on the computational effort. We show that the block size used in reconstruction has a negligible effect on the reconstruction error. Finally we show rendering results to emphasize the quality of this 3D reconstruction technique.     

Effect of the use of mineral filler on the properties of concrete

Engineers of the concrete technology are increasingly concerned with the material passing through a sieve of the size under 0.149 mm. Materials called very fine aggregate or mineral filler may affect the performance of concrete in an either positive or a negative way. Discussions on aggregate containing very fine material are vitally important. Washing the aggregate residue has been the sole way to solve this matter to date. This is mainly based on the debatable opinion that materials of this kind are regarded as clay material. The goal of the study was to determine how the content of mineral filler might affect properties of concrete. Two types of aggregates with different amounts of cement and mineral filler were used. Basically, mineral filler replaced sand. The effect of applying different amounts of mineral filler on concrete was then determined. The addition of 7-10% of mineral filler to fine aggregate (0-2 mm) was found to considerably improve the properties of concrete.     

Characterization of Maximum Likelihood Solutions to Image Reconstruction in Photon Emission Tomography

For photon emission tomography, the maximum likelihood (ML) estimator for image reconstruction is generally solution to a nonlinear equation involving the vector of measured data. No explicit closed-form solution is known in general for such a nonlinear ML equation, and numerical resolution is usually implemented, with a very popular iterative method formed by the expectation-maximization algorithm. The numerical character of such resolutions usually makes it difficult to obtain a general characterization of the performance of the ML solution. We show that the nonlinear ML equation can be replaced by an equivalent system of two dual linear equations nonlinearly coupled. This formulation allows us to exhibit explicit (to some extent) forms for the solutions to the ML equation, in general conditions corresponding to the various possible configurations of the imaging system, and to characterize their performance with expressions for the mean-squared error, bias and Cramér-Rao bound. The approach especially applies to characterize the ML solutions obtained numerically, and offers a theoretical framework to contribute to better appreciation of the capabilities of ML reconstruction in photon emission tomography.     

An architectural counterpoint in Universal Everything: Fluid Bodies exhibition

ABSTRACT

This exhibition review focuses on the quest for weaving boundaries between body-form-space-and material relationship using immersive technologies. Emerging as an architectural counterpoint, Universal Everything: Fluid Bodies exhibition held in Borusan Contemporary focuses on how we perceive the motion and form in relation to it, as well as fusing senses of kinaesthetic and synaesthetic through a data driven and motion-based visual representation. Through these algorithms, the exhibition displays how neuroarchitecture reminds us of the senses of perception. The architectural counterpoint, intention as an interaction and encounter of the body with ‘the machine’ as the ‘voyeur body’ and how this observational dialogue becomes a research methodology in understanding the nature of movement in space through digital tools.     

The behavior of the fibrinolytic system during long-term orthopedic immobilization]

Our previous experimental studies on rats motionless for 7 to 60 days in special devices limiting their movements revealed a significantly increased activity of the fibrinolytic system (Groza, Artino) due to the "detention stress" rather then to the immobilization. Starting from these studies we have tried to observe the behaviour of the fibrinolytic system during long-term orthopedic immobilization (7-28 days) on patients having different injuries of the lower limb and submitted to orthopedic therapy (with or without osteosynthesis) to which an anticoagulant preventive treatment was added (heparin or low-molecular-weight substitutes such as Clivarine, Fraxiparine). We studied on 23 patients (11 male and 12 female) motionless for 14, 21, 28 days the plasma fibrinolytic activity (PFA) through euglobulin lysis time (ELT). Clinical investigation revealed that PFA did not change significantly during long-term orthopedic immobilization regardless of the duration of immobilization (14,21,28 days). Rosenfeld et al. (1994) described in healthy volunteers on bedrest for 36 hours an increase of PFA beginning at 24 hours of immobilization, this variation being capable of preventing stasis effects. Our results suggest that preventive anticoagulant therapy properly given during immobilization prevents thromboembolic events.