Evaluation of the removal of n-butanol vapor by the poly(lactic acid)-zeolite-TiO2 composite and formation of by-products

The use of polymeric films incorporated with zeolite-TiO₂ composites associated with UV radiation can be an alternative in the removal of volatile organic compounds (VOCs) through the adsorption and photodegradation processes. This study produced poly(lactic acid) (PLA) films incorporated with 13× zeolite, TiO₂, and 13×-TiO₂ zeolite composite to remove n-butanol and evaluate the by-products generated in the process. The results showed that 13× zeolite and TiO₂ added individually or as a composite to PLA, gave the polymer matrix a significant increase in the removal capacity of n-butanol. The best performance was presented by the zeolite-TiO₂, composite, confirming a synergistic effect. However, the formation of CO and CO₂ exceeded the expected values, with the verification that the polymeric matrix underwent photodegradation action by TiO₂. The polymeric film only containing zeolite is the most suitable for the removal of VOCs, as it did not present degradation of the PLA, generating a lower concentration of by-products.     

Bi-layer gelatin active films with “Pitanga” leaf hydroethanolic extract and/or natamycin in the second layer

Research on biopolymers-based active films produced with natural antioxidants and/or antimicrobials has gained attention over the last few years; however, anti-mold activity has been less studied than those of anti-bacteria. The aim of this work was the development and characterization of bi-layer films based on gelatin with natamycin and/or “Pitanga” leaf hydroethanolic extract in the second thin layer in order to determine the effects of these bioactive compounds on bi-layered film properties. The films were characterized regarding their moisture content and solubility in water, optical properties, microstructure, mechanical and thermal properties, water contact angle, water vapor permeability, UV/visible light transmission, X-ray diffraction, Fourier transform infrared (FTIR) spectroscopy, and antioxidant and anti-mold activities. Active films presented activity against Penicillium spp and Aspergillus niger and demonstrated antioxidant activity, as measured by ABTS ^•+ and DPPH ^• methods. Neither additive used in the films' second layer significantly affected the films' moisture content, thermal properties or the molecular interactions of the polymer matrix, assessed by FTIR, although some mechanical properties were affected, and the water contact angle. In conclusion, bi-layer films have reduced the quantity of additives required to maintain the antioxidant and anti-mold activities, as compared to similar monolayer films of the same thickness.     

Production of NiO,NiO/Ag,NiO/Au,and NiO/Pt hollow spheres by using block copolymer stabilized microspheres as a template

Hollow spheres of nickel oxide (NiO) and silver, gold, and platinum nanoparticle loaded NiO composites were successfully produced by using polystyrene (PS) latexes as hard template. Due to the presence of tertiary amine based diblock copolymer stabilizer on the surface of PS, the tertiary amine functional groups provided homogene deposition of nickel hydroxide, and then the precursor NiO salt production on the surface of PS latexes with a controlled precipitation technique. Then, NiO and NiO/metal NP hollow spheres were produced by calcination at 600 °C. Thermogravimetric analysis indicated that the amounts of NiO and NiO-composite after calcination were in the range of 21.1–29.7 wt%. The diameters of metal oxide spheres were in the range of 2.0–2.7 μm and the shell thickness were in the range of 250–350 nm. These structures had very low densities due to their porous and hollow structures and had outer layers with highly rough surfaces due to formation of nanosheets, which may offer important advantages for catalysis studies.     

Properties of Induction Plasma Sprayed Iron Based Nanostructured Alloy Coatings for Metal Based Thermal Barrier Coatings

Metal-based thermal barrier coatings (MBTBCs) have been produced using high frequency induction plasma spraying (IPS) of iron-based nanostructured alloy powders. The study of MBTBCs has been initiated to challenge issues associated with current TBC materials such as difficult prediction of their “in-service” lifetime. Reliability of TBCs is an important aspect besides the economical consideration. Therefore, the study of MBTBCs, which should posses higher toughness than the current TBC materials, has been initiated to challenge the mechanical problems of ceramic-based TBCs (CBTBCs) to create a new generation of TBCs. The thermal diffusivity (TD) (α) properties of the MBTBCs were measured using a laser flash method, and density (ρ) and specific heat (C _p) of the MBTBCs were also measured for their thermal conductivity (k) calculation (k = αρ C _p).     

Probabilistic consensus clustering using evidence accumulation

Machine Learning - Clustering ensemble methods produce a consensus partition of a set of data points by combining the results of a collection of base clustering algorithms. In the evidence...     

GaN‐based emissive microdisplays: A very promising technology for compact,ultra‐high brightness display systems

High‐brightness GaN‐based emissive microdisplays can be fabricated with different approaches that are listed and described. They consist either of hybridizing a GaN LED array on a CMOS circuit or building a monolithic component on a single substrate. Using the hybridization approach, two types of 10‐μm pixel pitch GaN microdisplay prototypes were developed: (1) directly driven, 300 × 252 pixels and (2) active‐matrix, 873 × 500 pixels. Brightness as high as 1 × 10⁶ and 1 × 10⁷ cd/m² for blue and green arrays, respectively, were reached. GaN‐based emissive microdisplays are suitable for augmented reality systems or head‐up displays, but some challenges remain before they can be put in production.     

A projected gradient method for optimization over density matrices

An ensemble of quantum states can be described by a Hermitian, positive semidefinite and unit trace matrix called density matrix. Thus, the study of methods for optimizing a certain function (energy, entropy) over the set of density matrices has a direct application to important problems in quantum information and computation. We propose a projected gradient method for solving such problems. By exploiting the geometry of the feasible set, which is the intersection of the cone of Hermitian positive semidefinite matrices with the hyperplane defined by the unit trace constraint, we describe an efficient procedure to compute the projection onto this set using the Frobenius norm. Some important applications, such as quantum state tomography, are described and numerical experiments illustrate the effectiveness of the method when compared to previous methods based on fixed-point iterations or semidefinite programming.     

An adaptive support vector regressor controller for nonlinear systems

In this study, a novel online support vector regressor (SVR) controller based on system model estimated by a separate online SVR is proposed. The main idea is to obtain an SVR controller based on an estimated model of the system by optimizing the margin between reference input and system output. For this purpose, “closed-loop margin” which depends on tracking error is defined, then the parameters of the SVR controller are optimized so as to optimize the closed-loop margin and minimize the tracking error. In order to construct the closed-loop margin, the model of the system estimated by an online SVR is utilized. The parameters of the SVR controller are adjusted via the SVR model of system. The stability of the closed-loop system has also been analyzed. The performance of the proposed method has been evaluated by simulations carried out on a continuously stirred tank reactor (CSTR) and a bioreactor, and the results show that SVR model and SVR controller attain good modeling and control performances.     

Two CEGAR-based approaches for the safety verification of PLC-controlled plants

In this paper we address the safety analysis of chemical plants controlled by programmable logic controllers (PLCs). We consider a specification of the control program of the PLCs, extended with the specification of the dynamic plant behavior. The resulting hybrid models can be transformed to hybrid automata, for which advanced techniques for reachability analysis exist. However, the hybrid automata models are often too large to be analyzed. We propose two counterexample-guided abstraction refinement (CEGAR) approaches to keep the size of the hybrid models moderate.