Purification of Ellagic Acid by UF Membranes

Ellagic acid (2, 3, 7, 8‐tetrahydroxy(1)benzopyrano(5, 4, 3‐cde)(1)benzopyran‐5, 10‐dione) was selected as a model pollutant which is present in the tannic fraction of cork processing wastewater. The ultrafiltration of aqueous ellagic acid solutions through three membranes was studied in tangential UF laboratory equipment. Two of the membranes were polyethersulfone (Biomax10K and Biomax5K, with MWCO of 10000 and 5000 Da, respectively), and the third made of regenerated cellulose (Ultracel5K, with MWCO of 5000 Da). The water hydraulic permeability was evaluated for each membrane. The evolution of the permeate flow rate with processing time was followed, and the influence of the main operating variables (feed flow rate, trans‐membrane pressure and nature of the membranes) on the permeate flux was also established. According to the hypothesis of the film theory, the intrinsic and apparent rejection coefficients, as well as the mass transfer coefficients, were also determined, and the values obtained were discussed as a function of the operating conditions used.     

Experimental Study of Ice Jam Thickening under Dynamic Flow Conditions

River ice jams are a common occurrence on northern rivers, and their formation can present a severe flood risk to nearby communities. As more and more river regulation projects are developed to provide an alternative to fossil fuels for electrical power-generating capacity, our need to understand the mechanisms associated with ice jam formation under variable flow conditions becomes more vital. This is because, at present, hydropeaking operations are often severely curtailed during the ice-affected seasons due to concerns that sudden flow fluctuations might instigate ice jams and associated flooding. Here, an experimental investigation explores the effects of rapid increases in discharge on ice jam formation and evolution. It is found that the thickness of ice jams formed under highly dynamic flow conditions tend to be slightly thinner than those formed during steady carrier flows for comparable discharges. Also, despite the highly dynamic nature of these consolidation events, the resulting ice thicknesses appear reasonably well approximated by steady flow theory.     

Bioavailability and Toxicity of Metal Nutrients during Anaerobic Digestion

This paper investigates the effect of chelating agents on the bioavailability of Fe and Cu during anaerobic digestion. The results on metal speciation and methane production in anaerobic serum bottles showed that biomass was able to grow in the presence of citrate 1?mM and nitrilotriacetic acid (NTA) 1?mM, suggesting that the binding sites at the cell surface competed efficiently for the metals with the chelating agents added. The presence of free ethylenediaminetetraacetic acid 1?mM inhibited methanogenesis, and this seemed to be related to a loss in metal uptake capacity. Although the addition of soluble microbial products (SMP) did not change metal distribution in anaerobic systems, it caused an increase in the rate of methane production, and it is believed that direct uptake of Cu-SMP complexes was responsible for this increase. The best protection against Cu toxicity occurred when stoichiometric amounts of NTA, which should complex and solubilize most of the Cu, was added, and it is likely that NTA prevented lethal concentrations of Cu from being adsorbed onto the cell and hence internalized.     

Impact of dimension uncertainty and model calibration on sewer system assessment.

Assessments of sewer performance are usually based on a single computation of CSO (combined sewer overflow) volumes using a time series of rainfall as system loads. A shortcoming of this method is that uncertainties in knowledge of sewer system dimensions are not taken into account. Moreover, sewer models are rarely calibrated. This paper presents the impacts of database errors and model calibration on return periods of calculated CSO volumes. The impact of uncertainties is illustrated with two examples. Variability of calculated CSO volumes is estimated using Monte Carlo simulations. The results show that calculated CSO volumes vary considerably due to database errors, especially uncertain dimensions of the catchment area. Furthermore, event-based calibration of a sewer model does not result in more reliable predictions because the calibrated parameters have low portability. However, it enables removal of database errors harmonising model predictions and 'reality'.     

The press as a vehicle for the introduction of a fashionable disease]

Two journalists wrote a book on HPU (haemopyrrol-lactamuria), a hitherto unknown metabolic disease that was alleged to cause a whole range of complaints. The book is based on the ideas of a biochemist who is also the director of a commercial organisation that offers a diagnostic test as well as a therapy (nutrition supplement) for HPU. The release of the book was accompanied by a press release that provoked various publications in both biomedical journals and the lay press. In response to these reports, the director sometimes registered a complaint with the Dutch Council for Journalism, but on other occasions he did not. The content of this book is in no way based on scientific research. In retrospect, it is obvious that the authors, the biochemist and the publishing company have joint commercial ties. All professional standards of scientific research and journalistic decency are thus being violated. In this way, they are doing harm to the independence and integrity of researchers and journalists in the public image. All the activities of the press seem to have been an essential part of a deliberate marketing strategy for the introduction of a non-disease.     

Mechanism of the skeletal isomerisation of linear butenes over ferrierite: analysis of side reactions

An investigation of the effect of reaction conditions on product distribution in the skeletal isomerisation reaction of linear butenes has been carried out. The main reaction routes over ferrierite have been identified. Beside the main product isobutene, major by-product formation occurs. The unwanted reactions include dimerisation of butene to form octenes, hydrogen transfer yielding small amounts of saturated C₃ and C₄ hydrocarbons and disproportionation producing propene and pentenes. The most abundant by-products were pentene and propene, though these were not formed in equimolar amounts as could be expected. Oligomerisation experiments of propene over ferrierite produced large amounts of butene and pentene, revealing the presence of adsorbed nonene. The cracking of this surface species to hexene and propene is the most likely reaction route for the excess propene formation. This additional path to propene formation operates mainly at temperatures above 623 K.