Sol-Gel Preparation of LaNiO3 and Its Physical and Chemical Properties

LaNiO3 was synthesized by sol-gel method in which lanthanum nitrate and nickel nitrate were used as start materials and citric acid was used as complex for gel formation.The precursor was dried and subsequently heated at elevated temperature to form the desired product.XRD analysis shows that pure LaNiO3 was synthesized.Electrical conductivity and electrochemical performance of the material were tested.The electrical conductivity decreases from 34.5that there are current peaks in the curve, which is the evidence of the electrochemical activity of LaNiO3.     

Visibility of collaboration on the Web

The emerging influence of new information and communication technologies (ICT) on collaboration in science and technology has to be considered. In particular, the question of the extent to which collaboration in science and in technology is visible on the Web needs examining. Thus the purpose of this study is to examine whether broadly similar results would occur if solely Web data was used rather than all available bibliometric co-authorship data. For this purpose a new approach of Web visibility indicators of collaboration is examined. The ensemble of COLLNET members is used to compare co-authorship patterns in traditional bibliometric databases and the network visible on the Web. One of the general empirical results is a high percentage (78%) of all bibliographic multi- authored publications become visible through search of engines in the Web. One of the special studies has shown Web visibility of collaboration is dependent on the type of bibliographic multi-authored papers. The social network analysis (SNA) is applied to comparisons between bibliographic and Web collaboration networks. Structure formation processes in bibliographic and Web networks are studied. The research question posed is to which extent collaboration structures visible in the Web change their shape in the same way as bibliographic collaboration networks over time. A number of special types of changes in bibliographic and Web structures are explained. This revised version was published online in June 2006 with corrections to the Cover Date.     

The Difference in Turbulent Diffusion between the Active and Passive Scalars in a Thermally Stably Stratified Medium

The difference in the turbulent diffusion between the active (heat) and passive (mass) scalars in a thermally stably stratified medium is investigated. The axisymmetric problem is treated on the formation of a turbulent circulation flow above a heated disk and on the turbulent diffusion of a passive scalar (impurity) from a continuous surface source in a stably stratified medium. The results indicate that the thermal stratification causes appreciable differences in the coefficients of turbulent transfer between the active (heat) and passive (mass) scalars. This means that the assumption of the identity of the coefficient of turbulent diffusion of heat and mass, employed in conventional models of turbulence, produces significant errors in estimating the heat and mass transfer in a thermally stably stratified medium.     

Thermal Transformations of an Aluminoborophosphate Binder

Thermal transformations of a commercial aluminoborophosphate binder are studied in a broad temperature range by optical microscopy, x-ray diffraction, IR spectroscopy, and thermal analysis. The introduction of B₂O₃ reduces the temperature of phosphate polycondensation, enhances the stability of cyclometaphosphates in a broad temperature range (180–1100°C), and reduces the stability of hydrogen phosphates.     

On mass transfer effect due to electrolytically evolved gas

Based on the Ibl penetration model mass transfer equations for gas-evolving electrodes were derived and compared to the effect of forced convection. Experimental studies were conducted in a rectangular flow channel with the working electrode facing downward. The variables were linear bubble velocity, linear electrolyte velocity, nature of the gas and electrode position. Up to bubble velocities (U_x) of 2 and 6 cm s⁻¹ for O₂ and H₂ gases respectively, the thickness of the Nernst diffusion layer (δ_av) was described well by the equation δ_av = [Dd_eL/(U_x)_av]^1/3. Intermediate slopes between − 1/3 and − 1 were observed for O₂ bubble velocities between 2 and 6 cm s⁻¹. A theoretical derivation suggests that in the absence of bubble coalescence, the mass transfer effect due to laminar flow induced by electrolytically evolved gas exceeds that due to forced external laminar flow for all practical channel designs.     

Ionization of Acetylacetone in Me2SO—Water Mixtures. Reactivity—Selectivity Principle or Principle of Imperfect Synchronization?

Rate constants for the reversible deprotonation of acetylacetone were measured in carboxylate and amine buffers in water and in 50%, 90% and 95% Me₂SO at 20°C. The Brønsted plot for the carboxylate ions is curved in the Me₂SO—water mixtures, but straight in water. The curvature is in the direction predicted by the Reactivity—Selectivity Principle (RSP). However, the Brønsted plot for the reaction with primary amines is straight in all solvents. This suggests that the curvature observerd with the carboxylate ions is caused by loss of solvation of the base; this loss of solvation is ahead of bond formation in the transition state rather than being a manifestation of the RSP. (Note that all Brønsted plots are based on pK_a values measured in the respective solvents.) The intrinsic rate constant (k₀) for proton transfer increases with the addition of Me₂SO, and more so with the carboxylate buffers than with the amines. This increase in k₀ is attributed to delayed solvation of the developing enolate ion in the transition state; with the carboxylate buffers, an additional factor is the early loss of solvation of the base. The various solvation effects observed in this study can all be understood in the context of the Principle of Imperfect Synchronization (PIS).     

Low backmixing in multistage agitated contactors used as reactors

The objective of the study was to test the validity of an available backmix correlation in the low backmix regime required by multistage agitated contactors used as reactors. The correlation was found to be inapplicable, and new equation forms were developed to fit the new experimental data. Keys to low backmix rates are a small annular area around the shaft compared to the column cross-sectional area and an extended annular path length.     

Factors affecting cloud point analysis of palm oleins

Some of the factors affecting cloud point determination of palm oleins are described. These are the type of container used, method of stirring, rate of stirring and bath temperature. The repeatability and reproducibility standard deviations of the method are determined from collaborative trials. Recommendations for the test are made to reduce the large variations among laboratories.     

A test for the statistical significance of DNA sequence similarities for application in databank searches

A method is developed, based on word-searching, which provides a rapid test for the statistical significance of DNA sequence similarities for use in databank searching. The method makes allowance for the lengths and dinucleotide compositions of the sequences being compared. A way is also described to calculate the power of the test, i.e. the probability of detecting a given similarity as being statistically significant. The effects on the power of the test of the scoring method, word length, sequence length, and sequence composition are examined. A novel scoring method is shown to be superior to the method currently used in most word-searching algorithms.