Precision of in-place concrete strenghts predicted using core strength correction factors obtained by weighted regression analysis

A two-step method for converting a concrete core compression test result to the in-place strength of the corresponding volume of concrete is presented. The strength of a non-standard core is first converted to the equivalent strength of a standard core, and then the standard core strength is converted to the equivalent in-place strength. Strength correction factors required for these conversions, obtained from weighted linear and nonlinear regression analyses presented elsewhere, are summarized. The accuracy of the predicted in-place strength is affected by the inherent error of the core strength measurement itself, and by the uncertainty of the various strength correction factors. It is shown that confidence intervals on the estimates of the strength correction factors obtained by regression analysis underestimate the true model error because the underlying models are imperfect. Instead, the accuracy of the strength correction factors is determined by a weighted regression analysis of ratios of observed-to-predicted values which accounts for the non-uniform variances of the dependent and independent variables. The coefficient of variation of the in-place strength predicted from a test of a 100 or 150 mm diameter core is between 4 and 5.5.%. If the in-place strength is predicted from a test of a 50 mm diameter core, the coefficient of variation of the predicted in-place strength is approximately 12.5%. These error estimates do not account for possible variation of in-place strength throughout the volume of the element being cored.     

Online Documentation for Engineering Software: A Hypertext Application

Abstract: This article describes the use of 'hypertext' as a means to document engineering software online. An extensive hypertext document can be built with relative ease using an authoring tool. Hypertext documents enhance the learning process through the association of facts. The user has the freedom to arrange his/her own study sequence in a particular session. The article provides a brief introduction to the hypertext technology and authoring tools, and describes a Mohr's Circle program, which has been developed to explore the use of hypertext for online users' manuals. The strengths and weaknesses of the software tool, KnowledgePro, as well as the development techniques, are discussed.     

The manual determination of ammonia in fresh waters using an ammonia-sensitive membrane-electrode

The use of a commercially-available ammonia-sensitive membrane-electrode for the manual determination of ammonia in discrete samples of fresh water has been investigated and the analytical procedure is described. The electrode is simple and convenient to use, and a sample can be analyzed in a few minutes. For normal routine analysis, the lower limit of determination is approximately 0·1 mg N 1⁻¹ though smaller concentrations can be measured. The relative standard deviation of analytical results varied from approximately 10 to 3 per cent as ammonia concentration increased from 0·1 to 4 mg N 1⁻¹. Results for samples of river water agreed well with those obtained by absorptiometric methods of analysis; the electrode responds to amines but otherwise appears to be essentially specific for ammonia. Use of the electrode will be advantageous in a number of applications, and it also has good potential for the on-line analysis of fresh waters.     

SEM-EDX analysis in the source apportionment of particulate matter on Hypogymnia physodes lichen transplants around the Cu smelter and former mining town of Karabash, South Urals, Russia

Scanning electron microscopy with energy-dispersive X-ray analysis (SEM-EDX) of particulate matter on lichen transplant thalli (Hypogymnia physodes) was assessed as a complementary technique to wet chemical analysis for source apportionment of airborne contaminants. Transplants (2 month exposure) stationed in the Cu smelter and former mining town of Karabash were compared with those from a control site 30 km south. Particulate matter in Karabash samples (715 analyses) showed higher levels of S, Pb, Cu, Sn and Zn compared with the control (598 analyses). Complex element associations among the particles confounded detailed mineralogical identifications, and therefore a simplified particle classification scheme was devised for source apportionment. Karabash samples contained high levels of particles classified as mining-related (MRP), and these were also identified in control samples, indicating wide spatial dispersion from the smelter and highlighting the sensitivity of the method. It was noted that MRP <2.5-microm diameter were poorly represented on lichen surfaces suggesting this may limit the usefulness of Hypogymnia transplants as proxies when assessing human health impacts from airborne particulates. Analyses of the lichen thallus surface (away from surface particulates) revealed high levels of Cu, Zn, Fe and Pb associated with organics in the Karabash samples compared with the control, with a proportionate loss of K, interpreted as being due to a stress-related increase in cell membrane permeability. This type of analysis may provide a novel SEM-EDX-based method for assessing lichen vitality. The techniques developed are presented and further implications of the study are discussed.     

Design of tall bridge piers by ant colony optimization

This paper describes a methodology for the analysis and design of Reinforced Concrete (RC) tall bridge piers with hollow rectangular sections, which are typically used in deep valley bridge viaducts. Piers are usually considered tall when the shaft has a height of 50 m or more. Three different types of rectangular hollow tall piers have been studied for road piers of 90.00 m in height: RTRA90, RLON90 and RLT90. RTRA90 has the two side walls inclined, RLON90 has the two frontal walls inclined and RLT90 has all four walls inclined. The procedure used in the present study to solve the combinatorial problem is a variant of the ant colony optimization. RTRA90 leads to the most economical pier, both in column and foundation cost, since it is the most efficient set up for horizontal loads. Regarding the cost of the vertical column only, i.e. excluding the foundation, the cost of RTRA90 and RLON90 are similar, but the cost of the column RLT90 is higher due to its larger unit cost of interior formwork.     

Environmental exposure to lead and its correlation with biochemical indices in children

Lead is a global concern because of its ubiquity in the environment and known to be associated with abnormal neurobehavioral and cognitive development of young children. There is no study from India to describe a composite profile of blood lead and its biochemical influences in children. The present study was aimed at determining the proportion of children with >10 mug/dL blood lead levels (BLLs), association between BLLs, and sociodemographic characteristics, if any, and alterations in biochemical indices in the blood as an underlying mechanism of lead intoxication. A total of 62 children (4--12 y) of Lucknow and nearby areas were recruited to determine BLLs, delta-amimolevulinic acid dehydratase (delta-ALAD) activity, catalase (CAT) activity, and malondialdehyde (MDA) and glutathione (GSH) levels in the blood. Mean level of blood lead was 7.47+/-3.06 microg/dL (2.78--15.0) and 29%-exceeded 10 microg/dL, CDC intervention level. The BLLs were found to be significantly influenced by social status, area of residence, source of water supply, maternal educational status (p<0.001), type of house, and proximity to traffic density (p<0.01). delta-ALAD was significantly lower in the group of children with BLLs 11.39+/-1.39 microg/dL when compared to children with BLLs 7.11+/-1.25 microg/dL and 3.93+/-0.61 microg/dL (p=0.0007, 0.0005, respectively). However, CAT activity was higher in the groups of children with higher blood levels than with lower BLLs (p=0.0159, 0.0001, respectively). There was an increase in MDA level with a concomitant decrease of GSH in children with BLLs 11.39+/-1.39 microg/dL compared with those of children with BLLs 7.11+/-1.25 microg/dL and 3.93+/-0.61 microg/dL (p=0.0001, 0.0002, and p=0.0001, respectively). There was statistically significant correlation of BLLs with delta-ALAD (r=-0.44, p=0.00035), MDA (r=0.46, p=0.00018), GSH (r=-0.62, p=0.00001), and CAT (r=0.44, p=0.00035). Significantly, CAT activity, MDA, and GSH levels were in turn, found to be correlated with delta-ALAD (r=-0.45, p=0.00024; r=-0.43, p=0.00053; r=0.43, p=0.00053, respectively). Results of the present study indicate a declining trend of BLLs in children when compared with those reported from metropolitan cities of India when leaded gasoline was in practice and that the BLLs were significantly associated with biochemical indices in the blood which have the potential to be used as biomarkers of lead intoxication.     

Microbial activity and distribution during enhanced contaminant dissolution from a NAPL source zone

Laboratory experiments were conducted to assess microbial reductive dechlorination in one-dimensional sand columns containing a 10 cm long source zone of uniformly distributed residual tetrachloroethene (PCE) nonaqueous phase liquid (NAPL), a 10 cm long transition zone directly down-gradient of the source zone containing some nonuniformly distributed NAPL ganglia, and a 40 cm long plume region down-gradient of the transition zone. The activity and distribution of Sulfurospirillum multivorans, a PCE-to-1,2-cis-dichloroethene (cis-DCE) dechlorinating bacterium, was evaluated in columns containing either a mixed-NAPL (0.25 mol/mol PCE in hexadecane) or pure PCE-NAPL. Significant dechlorination of PCE to cis-DCE was observed in the mixed-NAPL column, resulting in 53% PCE-NAPL mass recovery in the effluent with PCE-NAPL dissolution enhanced by up to 13.6-fold (maximum) and 4.6-fold (cumulative) relative to abiotic dissolution. Quantitative real-time PCR targeting pceA, the PCE reductive dehalogenase gene of S. multivorans, revealed that S. multivorans cells were present in the NAPL source zone, and increased in numbers (i.e., grew) throughout the source and transition zones. In contrast, minimal reductive dechlorination and microbial growth were observed in the column containing pure PCE-NAPL, where aqueous-phase PCE concentrations reached saturation. These results demonstrate that microbial growth within NAPL source zones is possible, provided that contaminant concentrations remain below levels toxic to the dechlorinating organisms, and that microbial growth can result in significant bioenhanced NAPL dissolution.     

Haloacetic acids and trihalomethanes in finished drinking waters from heterogeneous sources

Trihalomethanes (THM) and haloacetic acids (HAA) are the most frequent chlorination by-products (CBP) in finished drinking waters. Traditionally, THM have been used as surrogates for CBP although the quantitative association between THM and other CBP is not well established. This problem is addressed in the present study from the analysis of THM and HAA in drinking water samples from four Spanish regions, representing areas with very different CBP composition, e.g. between 86 and 8.0 microg/l of THM and 50-3.0 microg/l of HAA.The resulting dataset exhibit a statistically significant correlation between total THM and HAA (Pearson's correlation coefficient, r(p)=0.815,p<0.0005). Furthermore, specific HAA are highly correlated with specific THM or their combinations. Accordingly, multivariate linear regression analysis of the concentrations observed show that the levels in total and specific HAA can be predicted from the THM content. These results are relevant for epidemiological studies on health effects from CBP exposure since they usually involve comparison of populations consuming waters of very distinct quality.