Chaos control and noise suppression in external-cavitysemiconductor lasers

Feedback-induced chaos and intensity noise enhancement in a laser diode with external optical feedback are studied by computer simulations. The enhancement of relative intensity noise (RIN) that is often observed in experiments is considered as a result of the feedback-induced deterministic chaos and the intensity noise suppression is treated from the viewpoint of chaos control. Especially, the conventional noise suppressing technique known as a high-frequency injection modulation is turned into a problem of stabilizing chaos through parameter modulations. We developed an analytical method which allows to optimize the modulation frequency from the linear stability analysis of the dynamical model that describes the laser diode with external feedback. The robustness of the modulation with respect to the modulation frequency and depth is verified and the results suggest the feasibility of applying our method to actual noise suppression. The RIN in the low-frequency region (up to 100 MHz) is shown to be reduced to the solitary laser level when the feedback-induced chaos is effectively controlled with the optimized modulation frequency     

单轴-平面W型复合锶铁氧体的制备及其吸波特性研究

用草酸盐共沉淀和微量掺杂法研制六角晶系W型Ni,Zn,Co,Al多元复合锶铁氧体，通过调节Ni2W同Co2W的摩尔比例，可使该种铁氧体易磁化方向从C单轴型向垂于C轴的平面型转化，控制置换锶铁氧体中部分Fe3 的微量掺杂Al3 ，可以调整4πMs值，提高磁晶各向异性场，测试分析了5种不同含Co量的W型复合锶铁氧体粉料涂层的吸波特性，发现其自然共振吸收峰随Co含量增加向低频方向偏移，最高吸收峰可达32．8dB，是适用于电子隐形技术的高品位的微波吸收剂。     

钛酸铅系薄膜的热释电性能及其应用

叙述了钛酸铅系薄膜的热释电原理，介绍了国际上近几年钛酸铅系薄膜材料、制备工艺及热释电性能，并与块状陶瓷材料进行了比较，分析表明钛酸铅系薄膜具有优良的热释电性能及可观的应用前景。     

新一代的国际互联网通信协议：IP Version6

本文通过对ＩＰｖ６和ＩＰｖ４协议的比较，讨论了新一代国际互联网通信协议ＩＰｖ６的特点，新增加的功能，并指出ＩＰｖ６协议的颁布对现有技术的影响和相应对策。     

基于CAN总线的汽车测试解决方案

更高功能的汽车设计带动更复杂的汽车电子测试技术的发展。中国的汽车测试界尤其面对着设备的短缺、技术的匮乏等诸多困难。本文针对中国的汽车电子测试业。介绍了一种集成的软硬件同步平台。它基于CAN总线领域中的PXI总线。及国际广泛应用的测试管理TestStand软件。构建成高集成度、可靠性、升级维护方便、开放彻底的测试系统。     

美国教育部设置的变迁及法治特点

本文将美国教育部设置历程划分为"从无到有"、"从有到降格"、"从降格到重新设置"的三个阶段,并从为什么和怎么样两个角度对每一变迁进行了详述,并概括出美国教育部设置的法治特点:机构设置的存废以法治为基础、机构名称变化大但权限基本恒定、机构精简且职责明晰、突出服务与咨询功能.     

Acidogenic fermentation of blended food‐waste in combination with primary sludge for the production of volatile fatty acids

The performance of a laboratory‐scale anaerobic acidogenic fermenter fed with a mixture of blended kitchen food‐waste and primary sludge from a sewage treatment plant was investigated for the production of volatile fatty acids (VFA). The operating variables for acidogenic fermentation were kitchen food‐waste content (10 and 25 wt %), hydraulic retention time (HRT: 1, 3 and 5 days), temperature (ambient: 18 ± 2 °C, and mesophilic: 35 ± 2 °C) and pH (varied from 5.2 to 6.7). The experimental results indicated that effluent VFA concentrations and VFA production rates were higher at ambient temperature than at mesophilic conditions. The net amount of VFA with 10 wt % food‐waste increased up to 920 mg dm^?3 with an increase of HRT, but contrasting results (a decrease of 2610 mg dm^?3) were found due to the conversion of VFA into biogas in the case of 25 wt % food‐waste, which increased significantly at HRT of 3–5 days. In terms of biogas composition (CO₂ and CH₄), the organic matter was converted into CO₂ through the oxidative pathway by facultative species at low temperature while mesophilic temperature and optimum pH (6.3–7.8) played a pivotal role in increasing rate of conversion of VFA into biogas by methanogenesis. Rates of VFA production and their conversion are dependent on the food‐waste content in the mixture. Yet, the higher concentration of food‐waste (25% compared with 10%) did not produce VFA proportionally due to the increased rate of conversion of VFA into gaseous products. The maximum VFA production rate (0.318 g VFA_produced g^?1 VS_fed day^?1) was achieved in the 10 wt % food‐waste at ambient temperature and at a 5‐day HRT. Copyright © 2005 Society of Chemical Industry     

可见光共振腔发光二极管的研究进展

共振腔发光二极管是一种具有优良发光性能的光电器件。概述了对可见光共振腔发光二极管的共振腔结构、反射镜材料体系、基本工作机理和发光特性，并展望了这种器件的发展前景。     

锂离子电池正极材料锂锰氧化物的固相合成研究进展

阐述了固相合成反应的原理，综述了锂锰氧化物的几种固相合成方法，并着重介绍了熔融渍法，多步加热法，机械化学法和微波化学法等在锂锰氧化物合成中的研究进展。     

Development and Commercial Application of a Novel Catalyst DVR—1 for Catalytic Cracking of Daqing Vacuum Residue

A newly developed catalyst type DVR-1 for catalytic cracking of Daqing vacuum resid was put into use in a commercial VRFCC unit,This catalyst features uniquely active matrix and modified ultra-stable zeolite.The commercial application results show that the DVR-1 type catalyst has the advantage of high heavy oil conversion,good metal tolerance nd gooed stability for catalyst regeneration,The FCC tests have shown Favorable product distribution,acceptable product quality and enormaous economic benefits whe processing the feedstock containin 75%-100% Daqing VR.