地下金属矿山斜坡道浆土路修筑工艺及应用研究

斜坡道是地下金属矿山的主要运输通道,其道路质量直接影响着矿山的安全运输和经济效益。针对斜坡道混凝土浇筑路面存在的筑路成本高、养护时间长、使用寿命短及维护困难等不足,引入浆土路修筑技术,开展了地下金属矿山斜坡道浆土路筑路材料配比试验、黏土搓条和崩解试验、水洗筛分试验,并在云南卡房分公司完成了浆土路试验路段的修筑。结果表明：浆土路筑路技术能够很好地应用于地下矿山道路修筑,具有施工工艺简单、筑路成本低、施工周期短、承载能力强、抑尘防滑和低碳环保等诸多优点,为地下金属矿山道路修筑提供了工程借鉴,对于矿山降本增效、节能减排及安全高效具有重要的意义。     

新型缓蚀剂TG500在高CO2和Cl-环境中的缓蚀行为

在高温高压高CO2和Cl^-环境中，用静态高温高压模拟试验方法对不同浓度的TGS00新型咪唑啉季铵盐缓蚀剂进行了缓蚀效率测试．结果表明，TGS00缓蚀效率随加入量增加而增加，浓度增加到0．3g／L后，缓蚀速率提高不明显．同时研究N80套管钢表面的腐蚀产物，缓蚀剂浓度较低时，以均匀腐蚀为主，加入量提高到0．3g／L时，除局部少量点蚀外，无其它明显腐蚀特征．     

A NEW METHOD FOR DETERMINATION OF FRACTURES OF METALS UNDER SEM

本文提出了一种在扫描电镜中应用体视学原理定量研究金属脆性断口的方法.利用这种方法,图象上的小晶面的晶向、成分及两点间距都可以测定.     

La在KCl-NaCl和LaCl_3-KCl-NaCl熔体中的溶解行为SCIEI

本文利用透明槽技术、电化学循环V-A法及量子化学EHMO三种方法,研究了La在KCl-NaCl(1:1mol)及LaCl_3-KCl-NaCl熔体中的溶解行为。初步认为:溶解在KCl-NaCl熔体中的La是以中性金属状态存在。在LaCl_3-KCl-NaCl熔体中,溶解的La与La^(3+)作用生成低价La^(2+)离子,La^(2+)又与周围的La^(3+)作用形成原子簇离子La_m^(n+)赋存于熔体之中。     

齿轮精密成形精整毛坯设计

根据被整形工件的大小,提出优化的冷整形量,据此来确定冷整形前坯料的大小和温热成形时模具的参数。     

厚向异性板应力应变强度表述方法讨论

从希尔 (Hill)正交各向异性体二次屈服函数出发 ,可以导出厚向异性板应力强度 (等效应力 )与应变强度 (等效应变 )的两组表达式 ;本文讨论了采用两组不同表述方法的选择 ,并利用单向拉伸与双向等拉两种实验作了可比性的分析比较     

Preparation and properties of PAn/ATTP/PE conductive composites

Polyaniline/Attapugite/PE（PAn-ATTP/PE）composites containing particles with core-shell structure were obtained via the two-step blending processs. The experimental condition is as follows： Organo-attapulgite and PAn was obtained by modifying attapulgite with laury benzenesulfonic acid sodium salt and, then added to PE. The electrical conductivity, structure and properties of the composites were studied. Under the function of shear stress, core-shell structure particles with ATTP as the core and PAn as the shell were formed in the composites. The structure of PAn-ATTP/PE composites were characterized by FTIR,XRD,SEM, etc, respectively. The effects of concentration of doping agent on the conductivity and mechanical property of the composites were investigated. The mechanical properties and impact fracture surface of the ternary composites were studied by means of the tensile tester, SEM, etc. The results show that polyaniline encapsulated ATTP enhances the strength of the PE. And the conductivity of PAn-ATTP/PE composites of is improved effectively when polyaniline encapsulated ATTP is added. The composite have good conductivity when 10% polyaniline encapsulated ATTP is added.     

铸件内析出性气孔形成及演化的直接观察与分析

采用透明模型合金实时观察了铸件析出性气孔的形成发展,结果发现,纯物质凝固时,析出性气孔的产生发生于凝固型壳形成之后,随着凝固自型壁向中心凝固,呈现自周边向中心的气条生长。对于合金凝固,析出性气孔在凝固基本完成之后伴随着热裂及缩松的发生开始产生,呈现一定的偏聚现象。浇注前熔体过热度的提高将使析出性气孔更加密集,铸型和环境温度的降低有利于降低气孔的数量及分布范围,采用真空除气,可有效地抑制析出性气孔的产生和热裂缩松缺陷的形成。     

金属板料成形数值模拟的研究现状

本文对板料成形数值模拟的几个主要研究方向 :有限元算法、接触与摩擦、成形极限图、缺陷等的研究现状进行了介绍 ,并且讨论了板料成形数值模拟今后的研究方向     

Theoretical prediction and experimental realization of transition metal doped rutiles as diluted magnetic semiconductors

1. Introduction The new research area of ‘spintronics’ seeks to extend the properties and applications of electronic devices by making use of the spin of electrons in ad- dition to their charge. The development of magnetic semiconductors would be compatible with standard semiconductor technology and open new opportuni- ties. The so-called diluted magnetic semiconductor (DMS) is used to denote the no magnetic semicon- ductor doped with magnetic ions, and there have been considerable progress…