Understanding Drivers of Ocular Fibrosis: Current and Future Therapeutic Perspectives

Ocular fibrosis leads to severe visual impairment and blindness worldwide, being a major area of unmet need in ophthalmology and medicine. To date, the only available treatments are antimetabolite drugs that have significant potentially blinding side effects, such as tissue damage and infection. There is thus an urgent need to identify novel targets to prevent/treat scarring and postsurgical fibrosis in the eye. In this review, the latest progress in biological mechanisms underlying ocular fibrosis are discussed. We also summarize the current knowledge on preclinical studies based on viral and non-viral gene therapy, as well as chemical inhibitors, for targeting TGFβ or downstream effectors in fibrotic disorders of the eye. Moreover, the role of angiogenetic and biomechanical factors in ocular fibrosis is discussed, focusing on related preclinical treatment approaches. Moreover, we describe available evidence on clinical studies investigating the use of therapies targeting TGFβ-dependent pathways, angiogenetic factors, and biomechanical factors, alone or in combination with other strategies, in ocular tissue fibrosis. Finally, the recent progress in cell-based therapies for treating fibrotic eye disorders is discussed. The increasing knowledge of these disorders in the eye and the promising results from testing of novel targeted therapies could offer viable perspectives for translation into clinical use.     

Thermal,electrical, and mechanical properties of polyethylene–graphene nanocomposites obtained by in situ polymerization

In this study, we investigated the thermal, dynamic mechanical, mechanical, and electrical properties of polyethylene (PE)–graphene nanosheet (GNS) nanocomposites, with GNS amounts from 0 to 20 wt %, prepared by in situ polymerization. The thermal stability was evaluated by thermogravimetric analysis (TGA) and showed that the addition of GNSs to the polyolefin matrix increased the onset degradation temperature by 30°C. The electrical conductivity, measured by the impedance technique, presented a critical percolation threshold of 3.8 vol % (8.4 wt %) of GNS. A slight decrease in the tensile strength was found. On the other hand, dynamic mechanical analysis showed an increase in the storage modulus of the nanocomposites compared with that of neat PE. The glass‐transition temperature value increased from ?111°C (neat PE) to ?106°C (PE/6.6 wt % GNS). All of these results show that PE became stiffer and thermally more stable and could be transformed from an insulator to a semiconductor material in the presence of GNSs. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Long-term bond strength of fiber posts cement to dentin with self-adhesive or conventional resin cements

The aim of this study was to evaluate the immediate and the long-term push-out bond strength of glass fiber posts (GFP) cemented with conventional or self-adhesive dual-curing resin cements, at different root depths. Prior to cementation, the GFP (Reforpost #3, Angelus) were etched with 37% phosphoric acid for 30 s followed by silane for 1 min. Thirty canine roots were divided into two groups (n = 15) according to resin cement type: ARC – dual resin cement (RelyX ARC/3M ESPE) combined with an three-step etch-and-rinse adhesive (Adper Scotch Bond Multi-Purpose Plus 3M/ESPE) or U200 – self-adhesive resin cement (RelyX U200/3M ESPE). The manufacturer’s instructions were followed. After 48 h, the roots were cross-sectioned at three different depths, resulting in serial slices corresponding to the cervical, middle, and apical root thirds. Slices were randomly divided into two groups, according to the period of water storage prior to push-out bond strength analysis: 48 h or 180 days. The data (MPa) were analyzed using three-way ANOVA for randomized blocks (p < 0.05), which showed no significant interaction between the three factors (p = 0.716). The main study factors were also proven not significant (cement: p = 0.711; time: 0.288; root third: p = 0.646). In conclusion, root depth, cement type (self-adhesive or conventional), and storage in water for 180 days did not influence the bond strength of GFP to intracanal dentin.     

Determining the anisotropic content in a petroleum pitch - Comparison of centrifugation and optical microscopy techniques

The anisotropic content of a pitch is one of the most important parameters for characterizing such materials. Polarized light optical microscopy is the technique most commonly employed (ASTM D 4616 standard procedure) to measure this pitch parameter. However, this standard procedure is limited to pitches with mesophase contents only up to 20%. An alternative technique for determining the anisotropic content of a pitch is high-temperature centrifugation, which can be used without limitation for pitches with up to 100% anisotropic content. In this work, the two techniques have been compared; samples of four pitches with mesophase contents lower than 20% have been analyzed by both techniques and the results have been compared. The high-temperature centrifugation technique showed good repeatability, and the results that it yielded matched those obtained from optical microscopy when the anisotropic content of the pitch was higher than around 5%. The centrifugation technique is always faster, simpler, and possibly more accurate than optical microscopy for pitches with mesophase contents higher than 20%.     

Rice husk/poly(propylene‐co‐ethylene) composites: Effect of different coupling agents on mechanical,thermal, and morphological properties

Poly(propylene‐co‐ethylene) composites with rice husk were prepared in a corotating intermeshing twin‐screw extruder using four different coupling agents. While modified maleic anhydrides such as maleated polypropylene (MAPP) and maleated polyethylene (MAPE) are commonly used as compatibilizers to improve interfacial adhesion between lignocellulosic filler and matrix, in this study, polypropylene grafted with acid comonomer (CAPP) and high‐density polyethylene grafted with acid comonomer (CAPE) were also used. The morphologies and the thermal and mechanical properties of the composites were characterized using scanning electron microscopy, thermogravimetric analysis, differential scanning analysis, tensile and impact tests. The results indicate that the base resin of the compatibilizer is an important factor in determining the effectiveness of compatibilizers for composites. Composites with PP‐based compatibilizers are more effective than PE‐based compatibilizers due to the improved wetting of the former compatibilizer in the matrix polymer. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Studies based on the electrochemical response of 2-(2-nitrophenyl)-1H-benzimidazole at chemically modified electrodes with over-oxidized poly-1-naphthylamine

The development of a simple and efficient method to 2-(2-nitrophenyl)-1H-benzimidazole (NB) electrochemical determination using a polymer film coated chemically modified electrode is described. A glassy carbon (GC) electrode was modified employing an electro-polymerized film of 1-naphtylamine (1-NAP) followed by an over-oxidation treatment in 0.2 M sodium hydroxide solution (poly-1-NAPox electrode).The electrochemical behaviour of NB at the poly-1-NAPox electrode was investigated in a mixture of 10% ethanol + 90% buffer solution (pH 2) by cyclic voltammetry (CV) and square-wave voltammetry (SWV). The experimental results suggested that the poly-1-NAPox electrode had a good effect on NB electrochemical response because it avoided the electrode surface fouling as a consequence of the adsorption of NB reduction products, which was found when a bare GC electrode was employed as the working electrode. The NB cathodic current was dependent on the polymeric film over-oxidation degree (α).NB could be determined in the range from 2 × 10⁻⁶ to 5 × 10⁻⁵ M. The NB detection and quantification limits were 5 × 10⁻⁷ and 1.7 × 10⁻⁶ M, respectively. The percent relative standard deviation of the peak current to 10-replicated measurement using 1.2 × 10⁻⁵ M NB solution was 1.4%. The method showed to be rapid, simple and with a good sensitivity.     

Fischer-Tropsch synthesis and the generation of DME in situ

Ternary physical mixtures comprised a Fischer-Tropsch catalyst, a methanol synthesis catalyst and a zeolite employed in the hydrocarbon synthesis from syngas. Two Fe-based catalysts (i.e., one promoted by K and the other by Ru), two HY zeolites with different acidities, a commercial HZSM-5 and Cu/ZnO/Al₂O₃ (methanol synthesis catalyst) were used in these systems. The main products obtained were dimethyl ether, methanol and hydrocarbons. First of all, it was observed that by adding Cu/ZnO/Al₂O₃ catalyst to a binary physical mixture comprised of a Fischer-Tropsch catalyst and HZSM-5, the CO conversion increases more than 20 times. Second, during the reaction transient period the dimethyl ether selectivity decreases as the conversion increases. Third, the hydrocarbons synthesized followed the ASF distribution in the C₁-C₁₂ range and finally, it was also verified that the Y zeolites and the Fischer-Tropsch synthesis catalyst promoted by Ru generated the most active physical mixtures. The results showed that the role of zeolites in the ternary physical mixture is only associated with the dimethyl ether synthesis. The following reaction pathway was suggested: first, methanol is synthesized from syngas using Cu/ZnO/Al₂O₃ catalyst; after that, this alcohol is dehydrated by an acid catalyst generating DME; and lastly, DME initiates Fischer-Tropsch synthesis, which is then propagated by CO.