Drug-Free Nasal Spray as a Barrier against SARS-CoV-2 and Its Delta Variant: In Vitro Study of Safety and Efficacy in Human Nasal Airway Epithelia

The nasal epithelium is a key portal for infection by respiratory viruses such as SARS-CoV-2 and represents an important target for prophylactic and therapeutic interventions. In the present study, we test the safety and efficacy of a newly developed nasal spray (AM-301, marketed as Bentrio) against infection by SARS-CoV-2 and its Delta variant on an in vitro 3D-model of the primary human nasal airway epithelium. Safety was assessed in assays for tight junction integrity, cytotoxicity and cilia beating frequency. Efficacy against SARS-CoV-2 infection was evaluated in pre-viral load and post-viral load application on airway epithelium. No toxic effects of AM-301 on the nasal epithelium were found. Prophylactic treatment with AM-301 significantly reduced viral titer vs. controls over 4 days, reaching a maximum reduction of 99% in case of infection from the wild-type SARS-CoV-2 variant and more than 83% in case of the Delta variant. When AM-301 administration was started 24 h after infection, viral titer was reduced by about 12-folds and 3-folds on Day 4. The results suggest that AM-301 is safe and significantly decelerates SARS-CoV-2 replication in cell culture inhibition assays of prophylaxis (pre-viral load application) and mitigation (post-viral load application). Its physical (non-pharmaceutical) mechanism of action, safety and efficacy warrant additional investigations both in vitro and in vivo for safety and efficacy against a broad spectrum of airborne viruses and allergens.     

Systematic Review on Tumor Microenvironment in Glial Neoplasm: From Understanding Pathogenesis to Future Therapeutic Perspectives

Despite the multidisciplinary management in the treatment of glioblastomas, the average survival of GBM patients is still 15 months. In recent years, molecular biomarkers have gained more and more importance both in the diagnosis and therapy of glial tumors. At the same time, it has become clear that non neoplastic cells, which constitute about 30% of glioma mass, dramatically influence tumor growth, spread, and recurrence. This is the main reason why, in recent years, scientific research has been focused on understanding the function and the composition of tumor microenvironment and its role in gliomagenesis and recurrence. The aim of this review is to summarize the most recent discovery about resident microglia, tumor-associated macrophages, lymphocytes, and the role of extracellular vesicles and their bijective interaction with glioma cells. Moreover, we reported the most recent updates about new therapeutic strategies targeting immune system receptors and soluble factors. Understanding how glioma cells interact with non-neoplastic cells in tumor microenvironment is an essential step to comprehend mechanisms at the base of disease progression and to find new therapeutic strategies for GBM patients. However, no significant results have yet been obtained in studies targeting single molecules/pathways; considering the complex microenvironment, it is likely that only by using multiple therapeutic agents acting on multiple molecular targets can significant results be achieved.     

Effect of Vacuum and Modified Atmosphere Packaging on the Shelf-life of Liquid-smoked Swordfish (Xiphias gladius) Slices

ABSTRACT: Swordfish fillets, dry-salted and treated with liquid smoke, were sliced and packed in vacuum conditions and under modified atmosphere (MA) (5% O₂,45% CO₂, 50% N₂) and stored at chilled temperature (4°C) to determine the effect of different packaging on shelf-life. Sensory attributes, total volatile basic nitrogen (TVB-N), pH, lipid oxidation by thiobarbituric acid test, and microbiological counts were monitored during 45 d of storage. The TVB-N increased to levels recommended by European regulation at the time of sensory rejection, resulting as the most reliable parameter of quality decay. Lipid oxidation was low and microbial counts could not be correlated with quality decay. Sensory rejection (at least 50% of the assessors scoring =5 in a scale from 1 to 9) was sooner for MA-packed samples (12d) than for vacuum-packed ones (42d).     

Mac-A-Mal: macOS malware analysis framework resistant to anti evasion techniques

Journal of Computer Virology and Hacking Techniques - With macOS increasing popularity, the number, and variety of macOS malware are rising as well. Yet, very few tools exist for dynamic analysis...     

Upgrading the data acquisition and control systems of the European Breeding Blanket Test Facility

The EBBTF (European Breeding Blanket Test Facility) experimental plant is a key component for the development of the breeding blankets (TBMs test blanket modules, HCLL helium cooled lithium lead and HCPB helium cooled pebble bed types) used by ITER. EBBTF is an experimental plant which provides the double breeding/cooling loops (liquid metal and gas) required for HCLL testing. EBBTF is composed of four subsystems (TBM, IELLLO integrated European lead lithium loop, HE-FUS3 helium fusion loop, version 3 and helium compressor build by ATEKO) with dedicated control systems realized with hardware/software combinations covering 15 years (1995–2010) time span. At the end of 2010 we began to upgrade the HE-FUS3 data acquisition control systems (DACS) replacing the obsolete PLC Siemens S5 with National Instruments Compact FieldPoint and LabVIEW. The control room has been completely reorganized using high resolution monitors and workstations linked with standard Ethernet interfaces. The data acquisition, control, safety and SCADA software has been completely developed in ENEA using LabVIEW. In this paper we are going to discuss the technical difficulties and the solutions that we have used to accomplish the upgrade.     

Photo-fenton and UV photo degradation of naphthalene with zero- and two-valent iron in the presence of persulfate

An initial set of 12 kinetic experiments was carried out to remove naphthalene from an aqueous effluent by photo-Fenton involving Fe⁰ and Fe²⁺ at two different concentrations of H₂O₂ (150 and 300?mg?L^?1) and three different pHs (3, 5, and 7) (2²×3¹ experiments). The rate constants (k) for the reaction of naphthalene degradation by involving Fe²⁺ as reactant were in general higher than those with Fe⁰, but the use of Fe²⁺ increased the concentration of naphthalene at equilibrium (C_e) when compared with the same response obtained with Fe⁰ at analogous conditions. A second set of twelve kinetic experiments of photo-Fenton degradation was also performed with persulfate as additive at the conditions already reported, but at a constant concentration of H₂O₂ of 150?mg?L^?1 (2¹×3¹ experiments with NaCl +2¹×3¹ experiments without NaCl). In almost all the runs in which only the source of iron was varied, k from the kinetic data involving Fe²⁺ was higher than that involving Fe⁰, but no difference was observed in terms of C_e that was always zero. The addition of persulfate to treat the effluent either containing or not containing salt enhanced the chemical kinetics, and shifted the equilibrium toward the full removal of naphthalene. A final set of nine experiments of UV photo degradation of naphthalene by involving persulfate without iron, with Fe⁰ and Fe²⁺ in the pH range from 3 to 7 (3² experiments) mainly showed that the use of H₂O₂ may be avoided to remove rapidly and completely naphthalene from wastewater.     

Nanoscale surface modifications of medically relevant metals: state-of-the art and perspectives

Evidence that nanoscale surface properties stimulate and guide various molecular and biological processes at the implant/tissue interface is fostering a new trend in designing implantable metals. Cutting-edge expertise and techniques drawn from widely separated fields, such as nanotechnology, materials engineering and biology, have been advantageously exploited to nanoengineer surfaces in ways that control and direct these processes in predictable manners. In this review, we present and discuss the state-of-the-art of nanotechnology-based approaches currently adopted to modify the surface of metals used for orthopedic and dental applications, and also briefly consider their use in the cardiovascular field. The effects of nanoengineered surfaces on various in vitro molecular and cellular events are firstly discussed. This review also provides an overview of in vivo and clinical studies with nanostructured metallic implants, and addresses the potential influence of nanotopography on biomechanical events at interfaces. Ultimately, the objective of this work is to give the readership a comprehensive picture of the current advances, future developments and challenges in the application of the infinitesimally small to biomedical surface science. We believe that an integrated understanding of the in vitro and particularly of the in vivo behavior is mandatory for the proper exploitation of nanostructured implantable metals and, indeed, of all biomaterials.     

Zinc(II) Triflate‐Catalyzed Divergent Synthesis of Polyfunctionalized Pyrroles

The zinc(II) triflate‐catalyzed synthesis of highly functionalized pyrroles is described. The sequence involves the preliminary preparation of α‐aminohydrazones by Michael addition of primary amines to 1,2‐diaza‐1,3‐dienes. The treatment of these intermediates with dialkyl acetylenedicarboxylates produces α‐(N‐enamino)‐hydrazones that are converted into the corresponding pyrroles. The substituents on the carbon in position four of 1,2‐diaza‐1,3‐dienes drive the regioselectivity of the ring closure process. Starting from 4‐aminocarbonyl‐1,2‐diaza‐1,3‐dienes only dialkyl 1‐substituted 5‐aminocarbonyl‐1H‐pyrrole‐2,3‐dicarboxylates are achieved by Lewis acid‐catalyzed ring closure. A screening of several Lewis/Brønsted acid catalysts is performed. Zinc(II) triflate is the most efficient catalyst. Under similar reaction conditions, employing 4‐alkoxycarbonyl‐1,2‐diaza‐1,3‐dienes, only 4‐hydroxy‐1H‐pyrrole‐2,3‐dicarboxylates are synthesized. These latter reactions can be accomplished regioselectively also in one pot. Using 4‐aminocarbonyl‐1,2‐diaza‐1,3‐dienes, diamines and dialkyl acetylenedicarboxylates the sequence provides the corresponding α,ω‐di(N‐pyrrolyl)alkanes.