秋季太湖叶绿素a浓度荧光反演研究

基于2007年11~12月太湖全湖实测水质参数和光谱数据,首先利用高斯方程对遥感反射率进行过滤分解,找出叶绿素a(chl\|a)吸收峰675 nm以后的荧光反射峰(Fluorescence Peak:FP),再以662 nm处的反射率为基准,采用归一化荧光高度法进行叶绿素a浓度(C chl-a)反演,得到chl-a反演模型。基于高斯分解获取的chl-a的荧光反射峰值R(FP)与662 nm处的反射率R (662)比值［R(FP)/R(662)］与C chl-a之间存在显著的相关性,该模型为秋季太湖水体C chl-a的最佳反演模型。在高悬浮泥沙条件下,该模型能够较好地表示出叶绿素荧光高度与叶绿素浓度之间的关系,为C chl-a反演提供新的方法和依据,并为传感器敏感波段的选取和设置提供参考。     

基于逐次散射法的海洋-大气矢量辐射传输模式

首先推导了粗糙洋面双向偏振反射模型pBRDF(Bidirectional Polarized Reflectance Distribution Function),并将其与SOSVRT(Successive Order of Scattering Radiative Transfer)矢量辐射传输模式耦合,建立了海洋-大气耦合的矢量辐射传输模式,并对该耦合模式的模拟结果与前人模拟结果进行对比,验证了该耦合模式的可靠性与有效性。不同大气和洋面状态、不同高度的主平面内辐射强度和偏振度的模拟结果表明:pBRDF模型可以很好地模拟不同风速下洋面的偏振反射分布特征;洋面在特定角度具有很高的偏振度,并对大气顶的偏振辐射有很大影响。因此,该耦合模式可以更准确地处理辐射光谱在海洋-大气两种介质间的传输问题,对矢量辐射传输、大气遥感问题的研究有重要意义。     

基于优化支持向量机的人脸表情分类

分析了支持向量机（support vector machine, SVM）目前主要存在的问题和参数选择对分类性能的影响后, 提出了以改进粒子群算法优化SVM关键参数的优化SVM算法。将加入拥挤度因子的微粒群算法引入到SVM中, 在不牺牲泛化性能的前提下, 对其参数进行优化, 增加了SVM初始化参数的多样性, 减慢了局部搜索, 促进其在全局范围内的寻优搜索, 以有效克服SVM算法过分依赖初始值和容易陷入局部极小值的缺点, 并利用由粗到精的策略构造多层SVM人脸表情分类器, 在提高准确率的基础上加快分类的速度。实验证明, 新算法具有速度快、准确率高的优点。     

一种可扩展的动态数据持有性证明方案

提出了一种能保护数据隐私的动态数据持有性证明方案, 并对方案的安全性进行了证明, 性能分析表明该方案具有低存储、计算和传输负载的特点。通过扩展实现了对公开可验证和多副本检查的支持, 扩展方案的特点在于公开验证中不需要可信第三方的参与, 而多副本检查可以方便地实现对所有副本的批量检查。     

聚乙烯醇存在下耐尔蓝－铈钼、钪钼杂多酸体系连续光度测定铈和钪

在聚乙烯醇（ＰＶＡ）存在下，耐尔蓝（ＮＢ）与铈钼、钪钼杂多酸络阴离子形成离子缔合物，其最大吸收均位于５８５ｎｍ，表观摩尔吸光度分别为εｃｗ＝３．５２×１０６和εＳｃ＝３．５９×１０＿５Ｌ·ｍｏｌˉ１·ｃｍˉ１，铈和钪服从比耳定律的浓度范围分别为０～０．８μｇ／２５ｍｌ和０～２．０μｇ／２５ｍｌ，测定极限分别为１．３ｎｇＣｅ／ｍｌ（ｎ＝１０）和３．０ｎｇＳｃ／ｍｌ（ｎ＝７），对于０．０２μｇＣｅ／ｍｌ或０．０４μｇＳｃ／ｍｌ测定的相对标准偏差分别为２．７％（ｎ＝９）和２．８％（ｎ＝１０），离子缔合物的摩尔比分别为Ｃｅ：Ｍｏ：ＮＢ＝１：６：４和Ｓｃ：Ｍｏ：ＮＢ＝１：１２：３。本法用于地质标样分析，结果满意。     

Thermal and crystallization characteristics of poly(ethylene terephthalate) with poly(oxybenzoate‐p‐trimethylene terephthalate) copolymer

Poly(ethylene terephthalate) (PET) was blended with two different poly(oxybenzoate‐p‐trimethylene terephthalate) copolymers, designated T28 and T64, with the level of copolymer varying from 1 to 15 wt %. All samples were prepared by solution blending in a 60/40 (by weight) phenol/tetrachloroethane solvent at 50°C. The crystallization behavior of the samples was studied by DSC. The results indicate that both T28 and T64 accelerated the crystallization rate of PET in a manner similar to that of a nucleating agent. The acceleration of PET crystallization rate was most pronounced in the PET/T64 blends with a maximum level at 5 wt % of T64. The melting temperatures for the blends are comparable to that of pure PET. The observed changes in crystallization behavior are explained by the effect of the physical state of the copolyester during PET crystallization as well as the amount of copolymer in the blends. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1599–1606, 2002     

聚合转化率对硫调型氯丁胶结构与性能的影响

研究了硫调型氯丁橡胶乳液聚合中转化率对产晶结构与性能的影响.结果表明,随单体转化率的提高,聚合物的凝胶量及其交联密度增大,致使断链速度减慢,所得断链胶的门尼粘度上升,残存凝胶量增加,分子支化程度增大,分子量分布变宽,焦烧时间缩短。而相应硫化胶的拉伸强度、撕裂强度、冲击弹性和硬度等提高,扯断伸长率和永久变形下降。这些变化一般在转化率为80——85％时有明显转折.综合考虑产量与质量,聚合转化率控制在82±2％较为适宜。     

Fabrication and optical characterization of poly(2,5‐di‐n‐butoxyphenylene) nanofibril arrays

Anodic aluminum oxide (AAO) membrane can be used as template for the synthesized nanostructures. In this article, we have prepared the AAO membrane by using electrooxidation of aluminum substrate in phosphoric acid, and fabricated poly(2,5‐di‐n‐butoxyphenylene) (BuO–PPP) nanofibril arrays by oxidative coupling polymerization of 1,4‐di‐n‐butoxybenzene (DBB) within the pores of the AAO template membrane. The detailed molecular structure of the polymer nanofibrils was characterized by using infrared and ¹H nuclear magnetic resonance spectra, and estimated to consist of almost equal fractions of 1,4‐ and 1,3‐ linkages. We have used transmission electron microscopy, scanning electron microscopy, and atom force microscopy to confirm the morphologies and images of the AAO template membrane and the fabricated nanometer scale of BuO–PPP nanofibril arrays. The experimental results demonstrated that the pores of the AAO membrane were regular and uniform, and parallel each other, and the BuO–PPP chains in the narrowest template‐synthesized nanofibrils were oriented parallel to the porous axes of the AAO membrane and perpendicular to the surface of the aluminum substrate. The polymer chain orientation was partially responsible for the enhanced conductivity. The ultraviolet absorption spectrum of the BuO–PPP nanofibril arrays shown that the polymer contains a better extended π‐conjugation system along poly‐(p‐phenylene) backbone, which resulted in longer wavelength shift of the absorption band, the absorption maxima were located at 258 nm (E₁ absorption band) and 332 nm (E₂ absorption band), respectively. Photoluminescence spectrum of the BuO–PPP nanofibril arrays exhibited a blue emission. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 425–430, 2004     

Nanocrystalline CeO2 in SBA-15: Performance of Pt/CeO2/SBA-15 Catalyst for Water-gas-shift Reaction

CeO₂ particles confined within the pores of an SBA-15 mesoporous silica host were prepared by incipient wetness impregnation (IMP) and deposition precipitation (DP) methods. The materials were characterized by XRD, N₂-adsorption and temperature programmed reduction (TPR) to evaluate the structure, texture, and redox properties. The preparation procedure had significant impact on the assembling mode of CeO₂ inside the SBA-15 mesopores. A high dispersion of CeO₂ particles was achieved via DP, whereas the dispersion of CeO₂ prepared by IMP was found to be inhomogeneous and CeO₂ partially blocked the pores. The CO conversion in the water-gas-shift reaction was enhanced over 1 wt% Pt supported on CeO₂-modified SBA-15 obtained by DP.     

计算机远程控制的有关应用分析

通过远程控制软件介绍计算机远程控制的关键技术。在计算机普及速度加快的今天,计算机远程技术得到迅猛发展,研究计算机远程控制的应用,推动其推广和应用。本文论述计算机远程控制的应用,旨在为同行提供一些参考。