Achievable accuracy of site-specific path-loss predictions inresidential environments

The design of future wireless communication systems employing microcells will require a flexible tool for determining the dependence of the coverage area on base-station antenna height and position. In this paper, the accuracy of a ray-based algorithm versus slope intercept models for propagation prediction in residential environments is investigated by comparison with measurements. The measurements were taken in two areas of Trenton, NJ, where building heights ranged from one to three stories. For base-station antennas at or above rooftop levels, the algorithm is shown to give good agreement with the measurements. For these high antennas, the average and standard deviations of the difference between the site-specific prediction and measurement are less than 1 and 5 dB, respectively. For base-station antennas below the rooftops, additional ray paths are required in order to achieve similar prediction accuracy     

Heterogeneous porosity distribution in Portland cement exposed to CO2-rich fluids

Efficient and safe storage of injected supercritical carbon dioxide (CO₂) underground is now one potential solution for reducing CO₂ emissions in the atmosphere. Preventing any CO₂ leakage through a wellbore annulus after injection is a key to maintaining long-term wellbore integrity. Most wells in depleted oil and gas fields may be re-used to inject CO₂. These wells were mostly cemented with conventional Portland cement. It is thus crucial to study how such cement behaves at depth in CO₂-rich fluids.Set cement samples are exposed to CO₂ fluids under pressure and temperature to simulate downhole conditions. The degraded cement exhibits significant mineralogical changes and heterogeneous porosity distribution. The bulk porosity evolution, as well as local porosity gradients through the samples, is quantified using combined mercury porosimetry and back-scattered electron image analysis. Both techniques show an initial sealing stage related to calcium carbonate precipitation plugging the porosity, followed by a dissolution stage marked by a significant increase of porosity.     

Predicting the radio channel beyond second-generation wireless systems

Ray-optical methods incorporating Geometric Optics (GO) and the Uniform Theory of Diffraction (UTD) are appropriate for the representation of radiowave propagation in cities for frequencies in the UHF band and above, where the wavelength is small compared to building dimensions. Various ray codes have been written to implement the ray representation. Because the rays undergo multiple interactions with the buildings over long distances, the codes make various assumptions to reduce running time. This paper reviews the types of assumptions that have been made, the ways in which the ray procedures have been implemented, and the accuracy that can be expected from the predictions. The paper gives examples of how the computed ray quantities have been used to simulate the characteristics of the radio channel (besides received power) that impact the designs of different radio systems.     

The impact of a sewage treatment plant's effluent on sediment quality in a small bay in Lake Geneva (Switzerland–France). Part 2: Temporal evolution of heavy metals

The Bay of Vidy is the most contaminated area of Lake Geneva, Switzerland, as a result of the release of treated and untreated waste water from the municipal sewage treatment plant of the city of Lausanne and its surroundings. The reconstruction of the historical deposition of heavy metals in the sediment of the bay has been performed by the analysis of several dated (radiocaesium) sediment cores. The presence of sewage‐derived contaminants in the Bay of Vidy since the beginning of the sewage treatment plant's operations in 1964 is clearly observed, when a sharp increase in heavy metal contents is recorded, with maximum concentrations of cadmium, copper, zinc and lead occurring between the late 1960s and early 1970s. Despite considerable improvement in recent times, the present concentrations of the investigated heavy metals in sediments of the Bay of Vidy are still higher than concentrations measured at the centre of the lake, the latter close to Lake Geneva's natural background values. It is concluded that the quantity of heavy metals deposited in the bay is considerable and, because of sediment instability, will constitute a potential hazard for biota.     

Impact of retention on trans‐column velocity biases in packed columns

The heights equivalent to a theoretical plate of a weakly and strongly retained compounds were measured on two packed columns having different average mesopore sizes. The measurements were carried out in two different cases, with access to the mesopores by the sample molecules blocked (filled with n‐nonane) or not. The experimental results demonstrate that the eddy dispersion terms of both columns are significantly smaller for porous than for nonporous particles. Two simultaneous phenomena explain this observation. First, packed columns are radially heterogeneous which causes significant trans‐column velocity biases warping the bands. Second, radial dispersion contributes to mass transfer across the column, relaxing the radial concentration gradients that are caused by these velocity biases. The impact of these biases is minimized when the pores of the particles are not blocked; it decreases with increasing residence time and radial dispersion coefficient of the solutes. © 2009 American Institute of Chemical Engineers AIChE J, 2009     

Fusion intermediates of HIV-1 gp41 as targets for antibody production: design, synthesis, and HR1-HR2 complex purification and characterization of generated antibodies

The objective of this project was to study the interaction between HR1 and HR2, the stability of the complex formed, and to characterize the antibodies produced against monomeric HR1 and HR2 peptides as well as the HR1-HR2 complex. In this work, HR1 was mimicked by peptide N36, and HR2 was mimicked by peptide C34L and its analogues C34M2, C34M3, and C34D. Whereas C34M2 and C34M3 are partially composed of D-amino acids, C34D has same sequence as C34L, but is assembled entirely of D-amino acids. Using CD analysis, SPR assays, and gel filtration chromatography, we demonstrate the physical interaction between N36 and C34L and its analogues C34M2 and C34M3, but not C34D. We show that the HR1-HR2 complex is formed rapidly (<1?min) and remains stable, as demonstrated by its inability, in contrast to each free peptide, to inhibit the formation of syncytia. To generate antibodies with predetermined specificity against the transiently exposed intermediate that corresponds to the six-helix bundle structure, purified preformed HR1-HR2 complex was used, in parallel with monomeric HR1 and HR2 peptides, as immunogens in mice. Although the produced antibodies recognize total HIV-1 envelope glycoproteins in ELISA, they are unable to neutralize HIV-1-mediated fusion at 37?°C. However, if the incubation with these antibodies is carried out at 27?°C, a temperature that allows stabilization of the transient intermediate complex, anti-peptide antibodies are able to bind their corresponding domains in HeLa cells expressing HIV-1 gp41 in co-culture with HeLa CD4-CCR5/CXCR4 during the dynamic mechanism of membrane fusion. In agreement with the latter results, these antibodies, if previously incubated for 2?h at 27?°C, are able to strongly neutralize HIV-1 entry by membrane fusion, as shown by their ability to block the formation of syncytia.     

Continuous Crystallization of Submicrometer Energetic Compounds

This study introduces the conception of an apparatus to crystallize continuously nanosized explosive or more generally nanosized organic materials. These materials can be elaborated in pure state or in form of mixtures of energetic and inert materials. The installation can produce nano‐RDX or nano‐PETN from 1 to 10 g h⁻¹ using a reactor containing one ultrasonic piezoelectric transducer. The present study describes the different parameters which influence the crystallization process. It presents first results of the parametric study of the influence of these parameters. The most important parameters which were already identified are the frequency of the ultrasonic piezoelectric transducer, the nature of the solvent, the liquid level in the reactor, the temperatures in the system, and the passing time of the aerosol droplets in the oven.     

Plasma paraoxonase, health, inflammatory conditions, and liver function in transition dairy cows

Paraoxonase (PON) is a liver protein with hydrolase activity that is released into the blood stream. Paraoxonase may serve as an index of liver function because it is drastically reduced in chronic liver damage. Sixty-seven periparturient dairy cows were used to evaluate the relationship between plasma PON, health problems, inflammatory conditions, and liver function. Baseline plasma PON concentrations during the first 30 d in milk (DIM) were retrospectively used to group cows into quartiles. Metabolic profile, lipid metabolites (e.g., nonesterified fatty acids, β-hydroxybutyrate), inflammatory indices (haptoglobin, ceruloplasmin), low and high density lipoprotein cholesterol, vitamin A, vitamin E, reactive oxygen metabolites, total antioxidants, and PON in plasma were measured 2 wk before to 8 wk after calving. Weekly milk yield, body condition score, and all health problems were recorded. After parturition (7 DIM), cows in the lower PON group had the lowest plasma concentrations of negative acute phase proteins compared with the higher PON group for retinol binding protein (23.2 ± 2.86 vs. 36.0 ± 2.96 μg/dL of vitamin A), albumin (31.6 ± 0.73 vs. 33.9 ± 0.75 g/ L), total cholesterol (2.04 ± 0.30 vs. 2.45 ± 0.42 mmol/ L), and the highest concentrations of haptoglobin (0.67 vs. 0.24 ± 0.03 g/L; positive acute phase protein) and globulins (37.2 vs. 32.3 ± 1.4 g/L). Plasma bilirubin was highest in the cows (10.1 vs. 6.2 ± 0.6 μmol/L) in the lowest PON quartile. Plasma PON was negatively correlated with haptoglobin (r = −0.39) and bilirubin (r = −0.42) and positively correlated with retinol binding protein (r = 0.54), albumin (r = 0.38), and cholesterol (r = 0.55) fractions. A total of 82.3% of cows in the lower quartile and no cows in the upper quartile experienced serious inflammation. Lower quartile cows produced 28.1 ± 10.3 kg of milk/d; whereas upper quartile cows produced 38.3 ± 7.7 kg of milk/d during the first 30 DIM. A reduction in the ability of the liver to cope with the increased metabolic demand near parturition in dairy cows can be diagnosed using changes in baseline plasma PON.     

Interaction between laser beam and BaTiO3 powders in selective laser sintering treatments

The research work reported in this paper is an investigation of the behavior of barium titanate powders under selective laser irradiation. Our goal is to determine suitable conditions to sinter the powders and form dense layers usable in some electronic components. On that purpose, compacts of micro/nano BaTiO₃ powder mixes are used for a parametric investigation of the laser scans parameters (power, speed, etc.) with a Nd-YVO₄ laser (23 W). The microstructures obtained after laser treatments are evaluated by XRD, SEM and EDS and compared to a reference specimen manufactured in a conventional way. From this work it can be concluded that a high laser beam power is required to obtain a consolidation of the powder grains and the use of a high scan speed avoids the melting. The scanning speed also influences the final crystallographic state of BaTiO₃. Optimal parameters were founded in order to form a dense and homogeneous tetragonal BaTiO₃ surface.