Synthesis of Novel Tetra(µ3-Methoxo) Bridged with [Cu(II)-O-Cd(II)] Double-Open-Cubane Cluster: XRD/HSA-Interactions,Spectral and Oxidizing Properties

A new double-open-cubane core Cd(II)-O-Cu(II) bimetallic ligand mixed cluster of type [Cl₂Cu₄Cd₂(NNO)₆(NN)₂(NO₃)₂].CH₃CN was made available in EtOH/CH₃CN solution. The 1-hydroxymethyl-3,5-dimethylpyrazole (NNOH) and 3,5-dimethylpyrazole (NNH) act as N,O-polydentate anion ligands in coordinating the Cu(II) and Cd(II) centers. The structure of the cluster in the solid state was proved by XRD study and confirmed in the liquid state by UV-vis analysis. The XRD result supported the construction of two octahedral and one square pyramid geometries types around the four Cu(II) centers and only octahedral geometry around Cd(II) two centers. Interestingly, NNOH ligand acts as a tetra-µ³-oxo and tri-µ²-oxo ligand; meanwhile, the N-N in NNH acts as classical bidentate anion/neutral ligands. The interactions in the lattice were detected experimentally by the XRD-packing result and computed via Hirschfeld surface analysis (HSA). The UV-vis., FT-IR and Energy Dispersive X-ray (EDX), supported the desired double-open cubane cluster composition. The oxidation potential of the desired cluster was evaluated using a 3,5-DTB-catechol 3,5-DTB-quinone as a catecholase model reaction.     

Development of high performance amine functionalized zeolitic imidazolate framework (ZIF-8)/cellulose triacetate mixed matrix membranes for CO2/CH4 separation

High cost and complex fabrication process of inorganic membranes and lower position of pristine polymeric membranes in the Robeson upper bound curve urged the researchers to develop mixed matrix membranes (MMMs). Cellulose acetate being most commercially used polymer, dominates the market of CO₂ separation mainly because of low cost and environmental friendly resource. In the present study, MMMs consists of amine functionalized zeolitic imidazolate framework (NH₂-ZIF-8) and cellulose triacetate were fabricated for the first time. NH₂-ZIF-8 was used as a filler because the pore size of ZIF-8 is between the kinetic diameter of separating gases (CO₂ and CH₄). Moreover,  NH₂ group attached on the surface of ZIF-8 has affinity with condensable gases like CO₂. Morphology, crystallinity, tensile strength and functional groups of fabricated membranes were investigated using different analytical techniques. Results revealed that the increase of feed pressure has increased CO₂ permeability and decreased permselectivity. However, improvements in gas separation performance were observed with the addition of nanofiller. Best position in Robeson's upper bound curve at 4 bar was obtained with 10 wt% loading with CO₂ permeability and CO₂/CH₄ permselectivity of 218 barrer and 13.84, respectively. The improvement in the gas separation performance with loading is attributed to the increased diffusion coefficients as well as solubility coefficients, which was increased to 33% and 3.8%, respectively.     

Low temperature ionothermal synthesis of TiO2 nanomaterials for efficient photocatalytic H2 production,dye degradation and photoluminescence studies

The photocatalytic hydrogen generation is a novel, eco-friendly and favourable method for production of green and clean energy using light energy. In this direction, we report low-temperature ionothermal method for the preparation of TiO₂ nanoparticles (NPs) using methoxy ethyl methyl imidazolium tris (pentafluoroethyl) trifluoro phosphate (MOEMINtf₂) as an ionic liquid (IL) at 120°C for 1 day. The synthesized nanomaterials were examined using different spectrochemical methods like UV-DRS, XRD, FT-IR, TEM, BET and TGA-DTA techniques. The mixed phase TiO₂ is obtained with 81.7% of anatase and 18.3% of rutile phase by the XRD studies, and average crystallite size is found to be ∼7 nm. The stretching of Ti-O bond (∼555 cm⁻¹) and few other bands related to ionic liquid were confirmed by FTIR spectrum. The band gap energy was observed to be ∼3.38 eV by UV-DRS analysis. TEM images reveal spherical shape with an average particles size of about 10 nm. Photocatalytic H₂ generation was carried out using TiO₂ NPs and observed the generation of 553 μmol h⁻¹ g⁻¹ via water splitting reaction. Furthermore, the prepared TiO₂ NPs employed for the photocatalytic degradation of methylene blue dye (84.54%), and photoluminescence studies confirms the obtained material can be used in optoelectronic applications with green emission.     

Effect of annealing temperature on microstructure and thermoelectric transport properties of Cu2.1Zn0.9SnSe4 alloys

Cu-based quaternary chalcogenide compounds have been thermoelectric topic of interest among researchers, especially in recent years, due to their intrinsically low thermal conductivity. Recently plenty of work is done on thermoelectric properties of Cu₂ZnSnSe₄-based alloys emphasizing on importance of Cu₂ZnSnSe₄-based alloys in thermoelectric power generation. In this study, we report the effect of annealing temperature on microstructure and thermoelectric properties of Cu_2.1Zn_0.9SnSe₄ alloys. Cu_2.1Zn_0.9SnSe₄ compounds were synthesized by high-temperature melting followed by annealing at four different temperatures (600 °C, 650 °C, 700 °C and 725 °C). X-ray diffraction combined with Raman spectroscopy confirmed the presence of Cu₂ZnSnSe₄ phase along with ZnSe and CuSe secondary phases. The increased annealing temperature critically affected the microstructure of Cu_2.1Zn_0.9SnSe4 alloys. Successive increase in annealing temperature subsequently increases the average grain size from 7.3 for 600 sample to 12.1 μm for 725 °C sample by shifting grain size distribution toward higher range. Increased grain size results in reduced carrier scattering and decreases the electrical resistivity eventually improving power factor and maximum power factor of about 400 μWk^?2 m^?1 is obtained for 725 °C sample. Besides, the increased annealing temperature resulted in increased thermal conductivity attributing increased grain size resulting in low phonon scattering. 725 °C sample shows highest power factor and moderate thermal conductivity among all the samples which resulted in highest value of figure of merit for 725 °C sample of about 0.1 at 673 K.

Graphical abstract

     

Analysis of malware propagation behavior in Social Internet of Things

Social Internet of Things (SIoT) is an evolution of the Internet of Things, where objects interact socially with each other in the sense that they can independently establish new relationships, offer, or discover services, in order to accomplish their tasks with minimum involvement of the user. This additional convenience comes at the expense of higher risk of speeding up malware propagation through the dynamically created relationships. Because of the undesirable effects of malware (eg, disruption of device operation), it is essential to understand their spreading behavior in order to minimize their negative impacts. In this paper, we analyze malware propagation behavior in SIoT and investigate different parameters that influence spreading of malware. Toward that end, a simulator has been developed to simulate the spreading process of malware in SIoT. Many propagation scenarios were analyzed using the proposed simulator. Simulation results show that adding more relationships in the SIoT or increasing the number of owned objects per user has increased malware spreading rate. For example, the time to infect all objects is faster by 45% when objects communicate through four relationships compared with the case when objects communicate through only two relationships in SIoT. We also investigated ways to restrict the malware spreading. Results show that preventing objects from establishing dynamic social relationship slows down the infection by 40% compared with the next best scenario (ie, blocking co‐location relationships), which means more time for vendors to patch up their products.     

Recent progress in the modification of carbon materials and their application in composites for electromagnetic interference shielding

With the development in the modern technologies such as telecommunication instruments and scientific electronic devices, large amount of the electromagnetic radiations are produced, which lead to harmful effect on the highly sensitive electronic devices as well as on the health of human beings. To minimize the effect of electromagnetic radiations produced by different technologies, more efficient shielding materials are required which must be cost-effective, lightweight and good corrosion resistive. In this review, we focused on the shielding materials based on composites of carbon nanotubes and graphene. The typical surface modification of carbon nanotubes and graphene to optimize their interactions with polymers matrix has also summarized. It was found that the composites based on these carbon fillers were more efficient for electromagnetic interference shielding due to their unique properties (i.e., superior electrical, mechanical and thermal) together with lightweight, easy processing. Hence, the carbon nanotubes and graphene-based composites are excellent shielding materials against the electromagnetic radiations.     

Hybrid aluminium matrix composites containing boron carbide and quasicrystals: manufacturing and characterisation

Hybrid composites of boron carbide (B₄C) and Al_62.5Cu₂₅Fe_12.5 quasicrystals (QCs) were prepared by ball milling and pressureless sintering in aluminium matrix to investigate their individual and hybrid effects on microstructural and mechanical properties. Hybrid composite contained B₄C and QCs in 3?wt-% each, making a total of 6?wt-%. For reference, specimens of pure aluminium and two composites containing 6?wt-%B₄C and 6?wt-% QCs were prepared. Microstructural characterisation was performed using optical, scanning electron microscopy and X-ray diffraction, while evaluation of mechanical properties was carried out by hardness and compression tests. Uniform dispersion of reinforcements in composites was observed along with significant increase in the mechanical properties. The composite containing 6?wt-% QCs demonstrated the highest hardness, while the hybrid composite showed better compressive properties.