Characterization of hydraulic fluid spray combustion

The combustion intensity of hydraulic fluids and mineral oil, methanol, ethanol, and heptane, ejected vertically up ward through a pressure-jet hollow cone nozzle and stabilized by a ring burner, has been characterized in terms of heat release rates. A relationship has been established between the chemical heat release rate, fluid exit velocity, and chemical heat of combustion. Mineral oil, along with some organic esters, has the highest combustion intensity as indicated by heat release rate, followed by esters (organic and phosphates), heptane, water-in-oil emulsion, ethanol, methanol, and polyglycol-in-water. Variations in combustion intensities in hydraulic fluids are found to be due to variations in the chemical structures and additives.The efficiency of combustion is found to be sensitive to fluid exit velocity.The radiative fraction of the efficiency of combustion for phosphate esters is found to be the highest (0.38–0.40), followed by mineral oil (0.36), organic esters (0.28–0.35), water-in-oil emulsion (0.27–0.28), and polyglycol-in-water (0.12–0.25). The radiative fraction of the efficiency of combustion for ethanol and heptane spray fires is found to be less than for the pool fires. For methanol spray fire, radiative fraction of the efficiency of combustion is found to be about the same as for the pool fire.The visible flame length of hydraulic fluid spray fires varies with the chemical heat release rate to the power of 0.6 for both hollow and solid cone nozzles.     

Air monitoring network program in Saudi Arabia

The Kingdom of Saudi Arabia has initiated a program to install air quality network stations throughout the country in order to measure concentration of the ambient air pollutants. The site selection of these stations is an important objective to be accomplished and must be done based on scientific and rational work. To accomplish this objective, a modified version of atmospheric transport and dispersion model, known as air resources laboratories - atmospheric transport and dispersion (ARLATAD) model, is used to evaluate long range transport and diffusion of air pollutants from major pollution causing sources such as refineries, open-air burning of associated gases of oil fields and major industries.Hourly meteorological data for a period of three years (from 1977 to 1979) on wind speed, wind direction, pressure, and temperature from 20 synoptic stations in Saudi Arabia is processed and used as model input. In addition to these, meteorological data from three upper air stations is also processed in order to determine base and top of critical inversion heights.Various pollution causing sources are identified within the study area. Air trajectories are drawn with sources as the origins of the trajectories and the dispersion characteristics is studied with distance and time. Based on long term meteorological records, the adversely affected zones are statistically identified for potential station sites.     

A new standard test method for the quantification of fire propagation behavior of electrical cables using Factory Mutual Research Corporation's small-scale flammability apparatus

A new specification test standard for cable fire propagation has recently been developed at Factory Mutual Research Corporation (FMRC), using FMRC's 50 kW-scale flammability apparatus. Guidelines for fire protection of grouped cables in non-combustible industrial and commercial occupancies have been formulated. Cables are classified into three groups on the basis of their fire propagation behavior: Group 1 cables: fire propagation beyond the ignition zone is not likely to occur and fire protection is not required; Group 2 cables: fire propagates slowly beyond the ignition zone and fire protection is required in most applications; and Group 3 cables: fire propagates rapidly beyond the ignition zone and fire protection is always required. This paper describes the concepts associated with the development of the standard test and fire protection guidelines for cables.     

A multivariate study: variation in uptake of trace and toxic elements by various varieties of Sorghum bicolor L

The aim of present study was to evaluate the variation in uptake of elements (As, Ca, Cd, Co, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, Pb and Zn) by different varieties of Sorghum bicolor L., plants grown in soil amended with untreated industrial waste water sewage sludge (SUIS), on same experimental plots. The power of chemometrics was also used in exploring the potential natural and/or anthropogenic sources responsible for elemental contents in different varieties of sorghum. Hierarchical cluster analysis was used to explore the different variety of sorghum grouping according to corresponding their SUIS samples as additional information to the output obtained by principal component analysis. Significant genotypic variation was detected in the fourteen elements concentrations in sorghum grains, indicating the possibility to reduce the concentration of toxic elements in grains through breeding approach. It was observed that high tolerance limit of toxic elements was observed in sorghum variety PARC-SV-1.     

Safety assessment in plant layout design using indexing approach: implementing inherent safety perspective. Part 1 - guideword applicability and method description

Layout planning plays a key role in the inherent safety performance of process plants since this design feature controls the possibility of accidental chain-events and the magnitude of possible consequences. A lack of suitable methods to promote the effective implementation of inherent safety in layout design calls for the development of new techniques and methods. In the present paper, a safety assessment approach suitable for layout design in the critical early phase is proposed. The concept of inherent safety is implemented within this safety assessment; the approach is based on an integrated assessment of inherent safety guideword applicability within the constraints typically present in layout design. Application of these guidewords is evaluated along with unit hazards and control devices to quantitatively map the safety performance of different layout options. Moreover, the economic aspects related to safety and inherent safety are evaluated by the method. Specific sub-indices are developed within the integrated safety assessment system to analyze and quantify the hazard related to domino effects. The proposed approach is quick in application, auditable and shares a common framework applicable in other phases of the design lifecycle (e.g. process design). The present work is divided in two parts: Part 1 (current paper) presents the application of inherent safety guidelines in layout design and the index method for safety assessment; Part 2 (accompanying paper) describes the domino hazard sub-index and demonstrates the proposed approach with a case study, thus evidencing the introduction of inherent safety features in layout design.     

Hazardous impact of toxic metals on tobacco leaves grown in contaminated soil by ultrasonic assisted pseudo-digestion: multivariate study

Tobacco leaves (Nicotiana tabacum L.), agricultural soil and pollute irrigated lake water samples were collected during 2005–2006 and analyzed for Cd and Ni by electrothermal atomic absorption spectrometry (ETAAS). A simple and efficient procedure was investigated for the complete decomposition of tobacco leaves using ultrasonic assisted acid pseudo-digestion method (UPDM). A Plackett–Burman experimental design was used as a multivariate strategy for the evaluation of seven factors/variables at once, while central composite were used to found optimum values of significant variables. The accuracy of the proposed methods was assessed by analyzing certified reference (CRM); Virginia tobacco leaves (CTA-VTL-2). The results being compared with those obtained by conventional wet acid digestion method. The result obtained by optimized method showed good agreement with the certified values and sufficiently high recovery 97.8 and 98.7% for Cd and Ni, respectively. Under optimal conditions, the detection limits (3σ) were evaluated to be 0.019 μg g⁻¹ for Cd and 0.37 μg g⁻¹ for Ni. The proposed method was successfully applied to the determination of Cd and Ni in raw, processed tobacco and different branded cigarettes samples.     

Studies on the thermoelectric effect in semiconducting ZnTe thin films

The thermoelectric power of Zinc Telluride (ZnTe) thin films, prepared onto glass substrate by e-beam evaporation technique in vacuum at ∼8 × 10⁻⁴ Pa, has been measured from room temperature up to 413 K with reference to pure copper. The deposition rate of the ZnTe thin films was maintained at about 2.05 nm s⁻¹. The thickness and temperature dependence of its related parameters have been studied. The Fermi-levels were determined using a non-degenerate semiconducting model. The carrier scattering index, activation energy and temperature of coefficient of activation energy have all been obtained at different ranges of thickness and temperature. All the samples were optically transparent and amorphous in structure.     

Self-doping Effects on the Superconducting Properties of Cu0.5Tl0.25M0.25Ba2Ca2Cu3O10−δ (M = Bi, Hg, Nb, Pd, Li, Na, K)

The effect of self-doping and substitution of elements of higher and lower electronegativity, such as Bi, Hg, Nb, Pd, Li, Na, K, on the superconducting properties of Cu_0.5Tl_0.5−x M _x Ba₂Ca₂Cu₃O_10−δ with x=0.25 is investigated. These experiments demonstrated that the elements of lower electronegativity such as Li, Na, and K can easily liberate their outer most s-electron that could be supplied to the conducting CuO₂ planes of Cu_0.5Tl_0.5−x M _x Ba₂Ca₂Cu₃O_10−δ superconductor, and as a result, we get enhanced superconducting properties. However, highly electro-negative elements hinder the transfer of carriers from charge reservoir layer to the conducting CuO₂ planes and promote inferior superconducting properties. In the present studies, we have investigated the effect of post-annealing in nitrogen and oxygen atmospheres for optimizing the carriers in conducting CuO₂ planes of Cu_0.5Tl_0.5−x M _x Ba₂Ca₂Cu₃O_10−δ (M=Bi,Hg,Nb,Pd,Li,Na,K) superconductor. These studies are important since the density of carriers in the conducting CuO₂ planes determines the Fermi-vector k _F and Fermi velocity v _F of the carriers, which ultimately brings about the final superconducting state of the system.      

Measurement of Frequency-Dependent Dynamic Properties of Soils Using the Resonant-Column Device

Dynamic properties of soils are commonly evaluated at resonance; thus, their variation with frequency is difficult to measure. A nonresonance (NR) method has been recently used for testing soils at low frequencies and strain levels below the linear threshold shear strain. However, the NR method has not been validated with the standard resonant method for different shear strain levels. In this study, the NR method is used to measure the dynamic properties of soils at low and midstrain levels for a maximum frequency bandwidth between 5 and 100?Hz using the resonant-column device. A new transfer function (NTF) equation is introduced to compare the dynamic properties measured using the NR method and the conventional transfer function approach. Experimental results for two sands and a sand–bentonite–mud mixture are presented for different strain and stress confinement levels. Results from the NR method compare well with the standard resonant column method at the resonant frequency if the strain levels are the same. The NTF approach can be used to measure the dependence of phase velocity of shear waves with frequency. However, the NTF method cannot be used to measure the variation of material damping with frequency. On the other hand, the NR method can be used to measure the degradation curves of wave velocity and material damping ratio as a function of frequency.     

Investigation of Flow Upstream of Orifices

A physical model study is conducted to investigate the flow field upstream of orifices. In particular, new experimental data for the upstream flow pattern resulting from multiple orifices, an orifice near a free surface, and a large orifice (where the pressure gradient across the orifice cannot be ignored) are collected and presented. A new potential flow solution for flow behind orifices is developed to include pressure gradient effects as well as to accurately superpose the solution due to multiple orifices and determine a solution close to orifices. The proposed solution compares well with the measured data for multiple orifices and for an orifice near a free surface. For a large orifice, the skew in the velocity profile in the vertical direction due to the pressure gradient is accurately predicted.