Numerical investigation on the electronic components' cooling for different coolants by finite element method

In this study, we conducted a numerical simulation to examine the cooling performance of an aluminum finned heat sink attached to a silicon chip, placed in a chamber of a rectangular cross-section. The heat sink is cooled by convective heat transfer utilizing nine commercially available gaseous coolants, namely air, hydrogen, helium, nitrogen, oxygen, carbon dioxide, freon12 vapor, propane, and ammonia. To select an appropriate coolant for electronic devices in terms of thermal–hydraulic performance, the maximum temperature on the chip domain and the associated pressure drop in the cooling channel as a function of coolant velocity are analyzed for the aforementioned fluids. It has been found that the minimum temperature is recorded for propane and freon12 vapor, which is approximately 31.1°C, for a coolant velocity of 0.5 m/s, but freon12 vapor shows the highest pressure drop, approximately 900 mPa, among all coolants. In the overall velocity regime, hydrogen shows the best cooling performance in terms of both cooling capacity and hydrodynamic characteristics. But considering safety issues, helium can be a better alternative. This comprehensive study provides a better understanding of different coolant performances, which will aid engineers to develop an effective cooling technique to accommodate the inexorably rising power demand.     

Possibility of efficient utilization of wood waste as a renewable energy resource in Serbia

Wood biomass in Serbia is traditionally used for energy. However, the manner of its use is outdated, and efficiency is very low. Annually over 3.5 million m³ of wood is cut down for energy needs in Serbia. In order to better exploit all forms of woody biomass, especially the one that is now treated as waste, and in order to fulfil the obligations from the outlined Convention on Climate Change it is necessary to switch to a modern way of production and utilization of woody biomass. Serbia is now at the very beginning of this process. This paper gives an overview and an analysis of the possibilities of utilization of wood waste as a renewable source of energy and the problems that producers in Serbia are facing due to undeveloped markets and excessive funds that are needed to start the production of briquettes and pellets. The ecological and economical advantages of using woody biomass, as well the possible support measures for the use of woody biomass in Serbia are also the topic of this paper. The present situation in this area, the manner of waste management in sawmills and the reasons for the necessity of future development of this industrial production are also briefly described.     

Oil palm bunch ripeness classification using fluorescence technique

Oil palm is Malaysia’s major agriculture product and it covers approximately 5 million hectares of Malaysia’s land. Limited land resources have been an important factor that motivated the need to increase oil extraction rate (OER). OER of oil palm fresh fruit bunches (FFB) depends highly on their maturity stage. The ripe oil palm FFB will produce high OER while the under ripe and over ripe oil palm FFB will produce less oil. Thus, this paper presents a method of classification between oil palm FFB into ripe, under-ripe and over-ripe categories. This research was done at an oil palm plantation in peninsular Malaysia. A total of two-hundred and ten oil palm FFB that consist of seventy bunches for each category of under-ripe, ripe and over-ripe had been used. Each bunch was scanned ten times randomly with a hand-held multi-parameter fluorescence sensor called Multiplex®3. The parameter measured was the Blue-to-Red Fluorescence Ratio (BRR_FRF) obtained from blue-green (447 nm) and far-red (685 nm) emission signal by using ultraviolet (UV) light emitting diode as excitation light source. The novel contribution of this research is to prove that the oil palm FFB maturity can be determined using the Blue-to-Red Fluorescence ratio index. This is based to our finding of a significant difference among the three categories of ripeness based on the parameter. Classification and Regression Tree (C&RT) method was proposed in this paper. Hundred-fifty samples were used to develop the model by trained it using C&RT method and the remaining sixty samples for the test component. By using the C&RT method, the results show the best accuracy of overall testing classification is 90%. This research will be useful for future development of non-destructive, automatic and real time oil palm FFB grading system.     

Screening for lipid depositor of Indonesian microalgae isolated from seashore and peat-land

The screening for finding the lipid producer of indigenous Indonesian tropical microalgae that obtained from peat-land at Riau, Sumatra and seashore at Lombok has carried out. Preliminary screening was done by selection on faster growing algae from 44 (forty-four) isolates. 10 (ten) isolates were chosen for further analysis. Out of 10 selected isolates shows that five isolates have indication rapid growth and high content of lipid, furthermore those chose isolates were observed comprehensively, namely LIPI11-2-Al005, LIPI11-2-Al010, LIPI11-2-Al015, LIPI11-2-Al018, and LIPI11-2-Al019. The microalgae are belong to the eukaryotic microalgae and its seem to be closed to Chlorophytes that has cell nuclear with an envelope, light green chloroplast, thick cell wall, round and elongated cell features. Cultivation of the microalgae in laboratory condition (1 L) has shown that lipid content was about 20–35% base in cell dry weight. The highest lipid content was found in the isolate LIPI11-2-Al018 of 30.74% per dry weight cell. LIPI11-2-A1018 therefore was test for scale up cultivation reach the culture volume of 5 L in the cylindrical photobioreactor, and expected to be source of triglycerides and lipids for biodiesel ingredient.     

Regioselective Alkoxylation of 2,2,4-Trimethyl-1,3-pentanediol

An efficient procedure for the regioselective synthesis of secondary alcohol alkoxylates from 2,2,4-trimethyl-1,3-pentanediol (TMPD) is described. TMPD was reacted with propylene oxide followed by ethylene oxide in the presence of a catalytic amount of alkali metal hydroxide to form secondary alcohol alkoxylates. Instead of a mixture of compounds resulting from the reaction of TMPD and propylene oxide, the primary hydroxyl group of the TMPD reacted to form predominantly 2,2,4-trimethyl-3-hydroxypentylpropoxylate as the major product. On further ethoxylation the less hindered secondary hydroxyl group of the 2,2,4-trimethyl-3-hydroxypentylpropoxylate reacted predominantly. ¹³C NMR indicated that the secondary hydroxyl group (96.2 mol%) of TMPD remained unreacted during alkoxylation.     

Stability of electronic nose (e-nose) as determined by considering date-pits heated at different temperatures

Variability and sensitivity of a portable electronic nose (32 sensors) was assessed by considering different variables for measurement (i.e., reference, standard, first and second purges, sample draw time, waiting time for the volatiles released in the headspace, and mass of sample or headspace volume of the jar containing sample). In this study, dried date-pits were used a model sample. The highest stability was achieved when both reference and standard (i.e., dried date-pits, no heating treatment) were used before test sample measurement. Higher sample draw time more than 10 s significantly decreased the stability, whereas optimum second purge was observed at 50 s. Optimum time to generate volatile was observed as 24 h. A sample of 100 g increased the signal intensity compared to the 50 g sample for the 60°C and 100°C treated samples, while an opposite trend was observed for the 150°C treated sample. Finally, the responses of volatile components in date-pits heated at different temperatures (60°C, 100°C, and 150°C) were measured using the optimum operating conditions. Principal component analysis explored the relationships between the volatile features and classified date-pits heated at different temperatures. The results showed that an electronic nose was able to classify date-pits based on their volatile components generated by different degrees of heating (93.3% accuracy).     

A comprehensive review on theoretical framework‐based electric vehicle consumer adoption research

Green vehicles, such as electric vehicles (EVs), are getting noteworthy popularity among consumers worldwide. The purpose of this paper is to establish EVs as a feasible long‐term solution for the future of technology in the vehicle industry, which can decrease the current dependency on fossil fuels and also decrease greenhouse gas (GHG) emissions. As a part of long‐term benefits, the adoption of EVs gives environmentally friendly innovation to society. Despite positive environmental implications, the total number of EVs in usage is still inadequate. One of the major causes of this insubstantial adoption of EVs is largely dependent on the perceptions of consumers regarding EVs. However, this particular research study offers an inclusive outline on the existing hurdles for consumer adoption of EVs as well as a framework of the theoretical standpoints that were developed for the adoption behaviour, in addition to considering consumer intentions in the direction of EVs. In this particular study, the researcher found that the literature regarding EV adoption tried to address only the diffusion method of EVs. Whereas this study highlights consumer innovations, which provides a wide insight on consumer emotions to overlook the major aspect in consumer EVs' adoption research. The theme of this particular literature can be implemented in order to better understand the consumers' emotions and behaviour towards the adoption of EVs. The scholars further stated that there is a possible cause for more recent developments within the technological adoption part that can assist to be a standard for upcoming developments. For the last few years, knowledge regarding the problems surrounding the adoption and diffusion of EVs has gained less attention. This study expands this line of research by focusing on making a chance for developing the theoretical frameworks in terms of adding emotions in a psychological perspective where consumer behaviour and ethics are considered. Copyright © 2016 John Wiley & Sons, Ltd.     

A green separation process for recovery of healthy oil from pumpkin seed

In this study, pumpkin seeds, called as “Ürgüp Sivrisi” and grown in Cappadocia region, were used as plant materials because of high aroma contents. In the supercritical fluid extraction of pumpkin seed oil, the effect of main process parameters as the particle size (250-2360 μm), the volumetric flow rate of supercritical solvent (0.06-0.30 L/h), the operating pressure (20-50 MPa), the operating temperature (40-70 °C), the type of entrainer (ethanol and n-hexane) and those concentrations (0-10 vol.%) on the extraction yield, the oil solubility and the initial extraction rate were investigated. A cross-over effect for the extraction of pumpkin seed oil using supercritical CO₂ was determined at the operating pressure of 20-30 MPa. The maximum extraction yield obtained with entrainer free was reached 0.50 g oil/g dry seed at 600-1180 μm, 0.12 L/h, 50 MPa and 70 °C for the operation time of 5 h. The maximum extraction yield obtained with ethanol as an entrainer in the experiments was reached 0.54 g oil/g dry seed at the conditions of 600-1180 μm, 0.12 L/h, 30 MPa, 40 °C and 8 vol.% for the operating time of 2 h. The oil compositions were determined by gas chromatography analysis and the results showed that the compositions of pumpkin seed oil which were obtained by means of organic solvent extraction and supercritical fluid extraction were similar. The average oil compositions determined as 9.3 (±0.43)% palmitic acid, 7.5 (±0.6)% stearic acid, 32.3 (±0.6)% oleic acid, 48.1 (±0.6)% linoleic acid and 0.7 (±0.3)% linolenic acid. The morphological changes in the seeds were determined by the scanning electron microscopy analysis.     

Optimization of biohydrogen production by Clostridium butyricum EB6 from palm oil mill effluent using response surface methodology

Clostridium butyricum EB6 successfully produced hydrogen gas from palm oil mill effluent (POME). In this study, central composite design and response surface methodology were applied to determine the optimum conditions for hydrogen production (P_c) and maximum hydrogen production rate (R_max) from POME. Experimental results showed that the pH, temperature and chemical oxygen demand (COD) of POME affected both the hydrogen production and production rate, both individually and interactively. The optimum conditions for hydrogen production (P_c) were pH 5.69, 36 °C, and 92 g COD/l; with an estimated P_c value of 306 ml H₂/g carbohydrate. The optimum conditions for maximum hydrogen production rate (R_max) were pH 6.52, 41 °C and 60 g COD/l; with an estimated R_max value of 914 ml H₂/h. An overlay study was performed to obtain an overall model optimization. The optimized conditions for the overall model were pH 6.05, 36 °C and 94 g COD/l. The hydrogen content in the biogas produced ranged from 60% to 75%.     

Integration of GIS and multicriteria decision analysis for urban aquaculture development in Bangladesh

Site selection is a key factor in any aquaculture operation, affecting both success and sustainability as well as solving land or water use conflicts. This study was conducted to identify suitable sites for carp farming development in urban water bodies (UWBs) of Chittagong, Bangladesh using Geographical Information Systems (GIS) based MultiCriteria Evaluation (MCE) of water, soil and infrastructure database. ASTER imagery and 14 thematic layers were analyzed with ENVI and GIS capabilities, and developed a series of GIS models to identify and prioritize the appropriate UWBs for carp farming. The study identified 487 UWBs occupying 362 ha and revealed 280 ha (77%) is the most suitable, 36 ha (10%) is moderately suitable and 46 ha (13%) is not suitable which was consistent with field verification. The results are encouraging for extension of carp culture and diversify the economic activities of the urban dwellers.