Chemical composition and inhibitory parameters of essential oil and extracts of Nandina domestica Thunb. to control food-borne pathogenic and spoilage bacteria

The aim of this study was to examine the chemical composition of the essential oil isolated from the floral parts of Nandina domestica Thunb. by hydrodistillation, and to test the efficacy of essential oil and various organic extracts against a panel of food-borne pathogenic and spoilage bacteria such as Bacillus subtilis ATCC6633, Listeria monocytogenes ATCC19166, Staphylococcus aureus KCTC1916, S. aureus ATCC6538, Pseudomonas aeruginosa KCTC2004, Salmonella typhimurium KCTC2515, Salmonella enteridis KCCM12021, Escherichia coli 0157-Human, E. coli ATCC8739, E. coli 057:H7 ATCC43888 and Enterobacter aerognes KCTC2190. The chemical composition of essential oil was analysed by GC-MS. It was determined that 79 compounds, which represented 87.06% of total oil, were present in the oil. The oil contained mainly 1-indolizino carbazole (19.65%), 2-pentanone (16.4%), mono phenol (12.1%), aziridine (9.01%), methylcarbinol (4.6%), ethanone (3.3%), furfural (2.96%), 3,5-dimethylpyrazole (1.29%) and 2(5H)-furanone (1.32%). The oil (1000 ppm/disc), and various organic extracts of hexane, chloroform, ethyl acetate and methanol (1500 ppm/disc) exhibited promising antibacterial effect as a diameter of zones of inhibition (9-18 and 7-13 mm) and MIC values (62.5 to 1000 and 250 to 2000 microg/ml), respectively against the tested bacteria. Also the oil had strong detrimental effect on the viable count of the tested bacteria. These results indicate the potential efficacy of plant-based natural products such as essential oil and organic extracts of N. domestica to control food-borne pathogenic and spoilage bacteria.     

Occurrence of two genotypes of tetracycline (TC) resistance gene tet(M) in the TC-resistant bacteria in marine sediments of Japan

The tetracycline (TC) resistance gene tet(M) was monitored in bacteria isolated from Japanese coastal and off-shore marine sediments. The high rate of occurrence of TC resistant (TC(r)) bacteria (120 microg mL(-1) TC) was observed at frequency ranges between 0.0-0.08% in Tokyo Bay, 1.67-1.82% in Sagami Bay and 0.0-4.35% in the open Pacific Ocean. The tet(M) gene was PCR amplified from the TC(r) isolates, showing 127 of 209 isolates (60.8%) as positive. The rate of occurrence of tet(M) was between 32.0-96.0%, 21.1 -28.0% and 0.0-83.3% in the isolates from Tokyo Bay, Sagami Bay and the open Pacific Ocean, respectively. The tet(M) positive isolates belonged to 4 orders of bacteria. Bacillales was the most dominant order (121 strains) among tet(M) possessing bacteria, followed by Actinomycetales (three strains), Flavobacteriales (one strain) and Pseudomonadales (one strain). This indicates that tet(M) is present in various bacterial species and suggests that marine sediments are a natural reservoir of the tet(M) gene. Nucleotide sequence of the tet(M) revealed that two genotypes of tet(M) were found in the bacteria. The two genotypes were placed in genetically distant branches of the phylogenetic tree, suggesting that the two tet(M)s have different origins.     

Arsenic removal with iron(II) and iron(III) in waters with high silicate and phosphate concentrations

Arsenic removal by passive treatment, in which naturally present Fe(II) is oxidized by aeration and the forming iron(III) (hydr)oxides precipitate with adsorbed arsenic, is the simplest conceivable water treatment option. However, competing anions and low iron concentrations often require additional iron. Application of Fe(II) instead of the usually applied Fe(III) is shown to be advantageous, as oxidation of Fe(II) by dissolved oxygen causes partial oxidation of As(III) and iron(III) (hydr)oxides formed from Fe(II) have higher sorption capacities. In simulated groundwater (8.2 mM HCO3(-), 2.5 mM Ca2+, 1.6 mM Mg2+, 30 mg/L Si, 3 mg/L P, 500 ppb As(III), or As(V), pH 7.0 +/- 0.1), addition of Fe(II) clearly leads to better As removal than Fe(III). Multiple additions of Fe(II) further improved the removal of As(II). A competitive coprecipitation model that considers As(III) oxidation explains the observed results and allows the estimation of arsenic removal under different conditions. Lowering 500 microg/L As(III) to below 50 microg/L As(tot) in filtered water required > 80 mg/L Fe(III), 50-55 mg/L Fe(II) in one single addition, and 20-25 mg/L in multiple additions. With As(V), 10-12 mg/L Fe(II) and 15-18 mg/L Fe(III) was required. In the absence of Si and P, removal efficiencies for Fe(II) and Fe(III) were similar: 30-40 mg/L was required for As(II), and 2.0-2.5 mg/L was required for As(V). In a field study with 22 tubewells in Bangladesh, passive treatment efficiently removed phosphate, but iron contents were generally too low for efficient arsenic removal.     

民勤枸杞主要营养、功能成分、重金属及农药残留量分析

本文为了探讨民勤枸杞的营养、活性成分和安全性评价,通过使用高效液相、气相色谱法和其他测定方法分析民勤枸杞的基本营养和功能成分、氨基酸组成、重金属和农药残留量。民勤枸杞的基本营养成分（以每100 g干重计）蛋白质、粗脂肪和碳水化合物含量分别为13.71 g、3.09 g和60.80 g;功能成分多糖、类胡萝卜素、甜菜碱、抗坏血酸、总酚和总黄酮含量分别为2.11 g、569.81 mg、1.57 g、45.08 mg、81.95 mg和70.23 mg。民勤枸杞主要基本营养成分为碳水化合物和蛋白质,并含有丰富的功能性氨基酸天冬氨酸,脯氨酸和谷氨酸。民勤枸杞中色氨酸和芳香氨基酸等必须氨基酸含量丰富;天冬氨酸含量最为丰富;赖氨酸是第一限制必须氨基酸。民勤枸杞含有相对较高的脂肪、类胡萝卜素和抗坏血酸含量;其重金属和农药残留量没有超绿色食品枸杞标准限制。研究结果可为民勤枸杞质量定位提供理论依据。     

Mass balance of total mercury and monomethylmercury in coastal embayments of a volcanic island: significance of submarine groundwater discharge

To understand the contribution of submarine groundwater discharge (SGD) to the coastal mass budgets of Hg and monomethylmercury (MMHg), preliminary mass balance estimates were made for Hwasun and Bangdu Bays on Jeju Island, known to have large SGD due to the high permeability of the volcanic rocks. The mass balance results indicate that SGD is a main source of Hg in Hwasun Bay (23 ± 14 × 10(-2) mol yr(-1), 34%) and Bangdu Bay (23 ± 20 × 10(-2) mol yr(-1), 67%), although the contribution from atmospheric deposition was considerable (25% for Hwasun and 23% for Bangdu). MMHg was also discharged primarily from submarine groundwater at Hwasun (0.30 ± 0.17 × 10(-2) mol yr(-1), 55%) and Bangdu (0.65 ± 0.49 × 10(-2) mol yr(-1), 64%), which was higher than atmospheric deposition (6% for Hwasun and 2% for Bangdu) and sediment diffusion flux (5% for Hwasun and 3% for Bangdu). The overall mass balance results suggest that, although there are large spatial variations in SGD rates throughout the region, the coastal mass budgets of Hg and MMHg need to include SGD as well as atmospheric deposition and sediment diffusion as primary sources of Hg and MMHg.     

LOW TEMPERATURE OXIDATION OF LOW RANK COALS

The low temperature oxidation of a Montana subbituminous coal was investigated using round bottom 100 ml flasks in constant temperature baths. The experiments were carried out in normal and oxygen enriched air at 30°C, 45°C and 70°C with particle sizes ranging from 4 mesh to 100 mesh. Periodic analysis of gas samples from the flasks provided the rate data. The reactivity of the as received coal was compared with that of the same coal dried (i) in high pressure steam and (ii) in hot water

A rate equation has been proposed incorporating the effects of oxygen diffusion and surface reaction. For higher oxygen concentration and smaller particle sizes, the zero order surface reaction was found to be controlling. The temperature dependency of the reaction rate was found to be well represented by the Arrhenius equation. The activation energy varied slightly under various conditions between 15 to 20 kca)/g mole

The reactivity of the hot water dried coal was found to be similar to that of the as received coal. Steam dried coal however, was found to be much less reactive.     

Effect of processing on the composition and oxidative stability of coconut oil

The effect of various processing procedures on the composition and oxidative stability of coconut oil has been studied. The crude oil is relatively stable but major reductions in oxidative stability occur during the bleaching of oil degummed with phosphoric acid; during alkali refining; during the deodorization of oil degummed with citric acid and bleached; and during the deodorization of oil processed with a combined phosphoric acid degumming and bleaching operation. The reasons for the loss of oxidative stability during processing are discussed with reference to changes in the composition of the oil. Residual traces of citric acid or phosphoric acid play an important role in stabilizing processed oils. The tocopherol content is also important, although no additional stabilization of the oil occurs on adding levels of tocopherol above those present naturally in the crude oil. A combined phosphoric acid degumming and bleaching process leads to smaller losses of tocopherols than sequential treatments.     

Synthesis,Characterization and Catalytic Activities of Palladium(II) Nitroaryl Complexes

Two palladium(II) nitroaryl complexes trans-[bromo(p-nitrophenyl)bis(triphenylphosphine)palladium(II)] 1 and trans-[bromo(2,4-dinitrophenyl)bis(triphenylphosphine)palladium(II)] 2 have been synthesized. The complexes were characterized by FTIR and NMR (¹H, ¹³C and ³¹P) spectroscopy and elemental analysis. The molecular structure of complex 2, as confirmed by X-ray crystallography, reveals that the Pd atom and its neighboring groups (two PPh₃, Br and phenylene group) lie in a slightly distorted square plane. In the UV–Vis spectra of the complexes 1 and 2, the palladium to aryl charge transfer bands were observed. The emission peaks from the singlet excited states (S₁ → S₀) were observed in the photoluminescence spectra of the complexes. The thermal stability of the complexes has been studied by thermal gravimetric analysis (TGA). TGA data showed that both complexes are thermally stable up to 200 °C, and complex 1 is more stable than 2. The catalytic efficiency of the new palladium(II) complexes was studied as demonstrated using the Sonogashira coupling reactions with good yields. The experimental results suggest that the Sonogashira coupling reactions can be performed at moderate temperature (50 °C) using these new palladium(II) complexes as catalysts.     

Structural Control of NiO–YSZ/LSCF–YSZ Dual‐Layer Hollow Fiber Membrane for Potential Syngas Production

The objective of this study was to fabricate dual‐layer hollow fiber as a microreactor for potential syngas production via phase inversion‐based co‐extrusion/cosintering process. As the main challenge of phase inversion is the difficulty to obtain defect‐free fiber, this work focuses on the effect of the fabrication parameters, that is, nonsolvent content, sintering temperature and outer‐layer extrusion rate, on the macrostructure of the produced hollow fiber. SEM images confirm that the addition of nonsolvent has successfully minimized the finger‐like formation. At high sintering temperature, more dense hollow fiber was formed while outer‐layer extrusion rate affects the outer layer thickness.