Robustness of VS-MRAC with respect to unmodelled dynamics and external disturbances

A variable structure model reference adaptive controller (VS-MRAC) using only input and output measurements was recently proposed and shown to be globally asymptotically stable with superior transient behaviour and disturbance rejection properties. In this paper a singular perturbation approach is used in order to establish the robustness of the controller in the presence of unmodelled dynamics (parasitics) and disturbances. We develop a new Lyapunov-based technique to analyse the overall system and show that for sufficiently small parasitics the system remains stable and the output error is small in some sense.     

等规聚丙烯β晶型成核剂研究

精选了一系列有机和无机化合物为成核剂,使用砂浴法和热台法制备了一系列不同β晶含量的等规聚丙烯,发现最有效的β成核剂是溶靛素灰 IBL 和溶蒽素金黄 IGK,首次表明β成核剂具有排列紧密的稠球结构特征,且含有硫原子。     

Supporting real-time and multimedia applications on the Mercuritestbed

This paper describes the distributed system, network and software architecture, the application development environment, the performance, and the early lessons learned on the ATM LAN testbed Mercuri established at the Honeywell Technology Center, to develop distributed multimedia technologies for real-time control applications. We have developed a client-server-based software architecture on Sun Sparcstation-2s connected by a Fore Systems' ASX-100 ATM switch, with video processing handled by Parallax's X Video cards. The architecture enables network-transparent applications and provides simple primitives for multimedia capture, display, transmission, storage, and retrieval. A real-time multimedia-in-the-loop control application was developed as the vehicle for testing the capabilities and performance of the network. Our test measurements focus on the end-user-level performance metrics such as message throughput and round-trip delay as well as video-frame jitter under no-load and load conditions. Our results show that the maximum burst throughput that can be supported at the user level is 48 Mb/s using AAL 5, while round-trip delays for 4-kbyte messages are about 3 ms. Our experience reveals a number of performance bottlenecks and open issues in using commercial ATM switches for practical applications. Our conclusions are outlined     

语音时域分割研究

在语音时域挑选剩余可懂度低的可用置换集合,置换集合是语音TDS系统中不可缺少的重要环节,本文给出了可用置换选取的条件、客观评价标准和方法。     

Pore size control of porous silica by sol-gel process

Porous silica glass was prepared by sol-gel process from tetraethoxysilane (TEOS). The effects of solvents (water, ethanol), drying condition, heat treatment temperature on specific surface area and pore size distribution of porous silica were investigated. Gelation process accelerates with an increase of H₂O content, while retards with the increase of ethanol amount. Structure changes during heat treatment were studied by means of DTA, XRD. TEM micrographs show that the gel particles shrink after heated at 500°C, thus the average pore size decreases.     

Finite Element Analysis of a Moving Boundary Value Problem

A finite element formulation and the solution of a set of nonlinear coupled heat and mass transfer equations for a two-phase system with a moving evaporation interface is presented. The interface condition takes into account the moisture transfer balance at the moving boundary. The finite element results were compared with existing results for a single phase system for model validation. In the two-phase system, the movement of evaporation front has an appreciable effect on the temperature and moisture distribution inside the porous medium during drying. The effect of the nondimensional heat of vapourization parameter γ on the evaporation front, temperature and moisture distribution in porous medium was studied. The higher the value of γ, the slower is the movement of the evaporation front. The temperature decreased and the moisture content increased as the nondimensional vapourization parameter γ increased. This model has potential applications in studying the heat and mass transfer characteristics in food and biomaterials.     

Mobility modeling, location tracking, and trajectory prediction inwireless ATM networks

Wireless ATM networks require efficient mobility management to cope with frequent mobile handoff and rerouting of connections. Although much attention has been given in the literature to network architecture design to support wide-area mobility in public ATM networks, little has been done to the important issue of user mobility estimation and prediction to improve the connection reliability and bandwidth efficiency of the underlying system architecture. This paper treats the problem by developing a hierarchical user mobility model that closely represents the movement behavior of a mobile user, and that, when used with appropriate pattern matching and Kalman filtering techniques, yields an accurate location prediction algorithm, HLP, or hierarchical location prediction, which provides necessary information for advance resource reservation and advance optimal route establishment in wireless ATM networks     

A study on the anodic protection of Titanium evaporators in Al2(SO4)3 solution

The feasibility of the anodic protection of titanium evaporators in Al₂(SO₄)₃ solution was studied by the measurement of polarization curves, weight loss, solubility of passive film and AC impedance. The protection parameters and efficiency were determined. In addition, the practical technology of anodic protection was studied by screening reference electrodes and auxiliary cathodes. Throwing power was also measured. Four rows of tube-type evaporators of titanium have been anodically protected in situ. Field tests lasting more than one year show satisfactory results.     

A maximum torque control with a controlled capacitor for asingle-phase induction motor

This paper presents a new method to achieve a maximum torque for a single-phase induction motor. An AC adjustable capacitor using an electronic switch in parallel with a capacitor is proposed. The capacitor is short-circuited in a different period by an electronic switch during each cycle to vary the effective value of the AC capacitor. Two new optimization algorithms, which obtain a maximum starting torque by adjusting the effective capacitor, are proposed. No starting capacitor or centrifugal switch is used here. A theoretical analysis, and simulated and experimental results are presented in this paper