一种改进的十六进制文件管理工具—CHex32的研制

针对西方Hex32不能显示汉字和俄文具处理长文件时速度慢的问题，研制了一种改进的十六进制文件管理工具－CHex32，CHex32保留了西方Hex32对十六进制文件的主要编辑功以,胆一种用于分析软件功能和文件数据结构的实用工具。     

A robust adaptive pole‐placement controller without strictly positive real condition

This paper considers the adaptive pole‐placement control problem for system (1) with unmodelled dynamics η_n dominated by a small constant ε multiplied by a quantity independent of ε but tending to infinity as the past input, output, and noise grow. Using bounded external excitation and randomly varying truncation techniques, we give a design method of adaptive pole‐placement controller. It is shown that the closed‐loop system is globally stable, the estimation error for the parameter contained in the modelled part is of order ε, and the closed‐loop system under the adaptive pole‐placement control law is suboptimal in the sense of $$\mathop{\lim\sup}\limits_{{n\to\infty }}{1\over n}\mathop{\sum}\limits_{i=0}^n{\left({A^{*}(z)y_{n}‐L(z)C(z)w_{n}‐B(z)R(z)y_{n}^{*}}\right)^{2}{\leq}O({\varepsilon}^{2})+\gamma^{2}\mathop{\sum}\limits_{j=1}^q{b_{j}^{2}}}$$\nopagenumbers\end while the SPR condition used usually in other papers is replaced by a stability condition. Copyright © 2001 John Wiley & Sons, Ltd.     

一种检查水轮发电机定子绕组接头绝缘质量的方法

0　引言《电力设备预防性试验规程》(DL /T 5 96 -1 996 )中 ,在“容量为 6 MW及以上的同步发电机的试验项目、周期和要求”的条款里 ,关于“定子绕组端部手包绝缘施加直流电压测量”这一项 ,该规程指明该试验项目适用于 2 0 0 MW及以上的国产水氢氢汽轮发电机。而广东省新丰江水电厂的应用结果表明 ,该试验方法用来检查风冷水轮发电机定子线棒接头绝缘的好坏 ,也具有很高的准确性 ,完全可以将其作为一种检查水轮发电机定子绕组接头绝缘好坏的有力的辅助试验方法。本文就该试验方法及其在新丰江水电厂水轮发电机上的应用情况作一介绍。1…     

纳米碳酸钙制备过程中添加剂作用机理探讨

采用鼓泡碳化法 ,在最佳反应温度、反应物浓度的条件下 ,考察了添加剂对产物形状及粒径大小的影响 ,得到了直径为 2 0～ 30nm、长径比在 2 0左右且分散性能良好的针状纳米碳酸钙 ,并对添加剂作用机理进行了分析。     

高架桥梁上部结构整体降低施工中的抗风险对策

在高架道路、桥梁改建中,往往遇到需调整桥面标高的情况。以上海市南北高架与内环线高架相连的鲁班路立交SE匝道为例,介绍利用旧桥承台基础,在其上搭设支架和液压系统,然后解除立柱的垂直约束和水平约束,将桥梁上部结构整体分步降低到设计标高。重点介绍针对施工中安全风险点,采取的支撑体系、液压体系、降低顺序原则、上部结构牵拉系统、监测系统等具体措施。     

研究生生态型学术文化建设的探讨

本文立足学术文化研究的现状和意义,引入生态学相关理论构建了生态型学术文化模型,并在此基础上建立了相应的评价体系,针对研究生生态型学术文化作了综合评价,从而导出其“五维一体、协调发展”的优化模式。     

Quantitative analysis of Ni effect on CCT diagrams of novel air-cooled bainite steels using artificial neural network models

The quantitative effect of Ni content on continuous cooling transformation （CCT） diagrams of novel air-cooled bainite steels was analyzed using artificial neural network models. The results showed that Ni may retard the high- and medium-temperature transformation and martensite transformation. The results conform to the materials science theories.     

Highly Efficient Orange and Green Solid‐State Light‐Emitting Electrochemical Cells Based on Cationic IrIII Complexes with Enhanced Steric Hindrance

Highly efficient orange and green emission from single‐layered solid‐state light‐emitting electrochemical cells based on cationic transition‐metal complexes [Ir(ppy)₂sb]PF₆ and [Ir(dFppy)₂sb]PF₆ (where ppy is 2‐phenylpyridine, dFppy is 2‐(2,4‐difluorophenyl)pyridine, and sb is 4,5‐diaza‐9,9′‐spirobifluorene) is reported. Photoluminescence measurements show highly retained quantum yields for [Ir(ppy)₂sb]PF₆ and [Ir(dFppy)₂ sb]PF₆ in neat films (compared with quantum yields of these complexes dispersed in m‐bis(N‐carbazolyl)benzene films). The spiroconfigured sb ligands effectively enhance the steric hindrance of the complexes and reduce the self‐quenching effect. The devices that use single‐layered neat films of [Ir(ppy)₂sb]PF₆ and [Ir(dFppy)₂sb]PF₆ achieve high peak external quantum efficiencies and power efficiencies of 7.1 % and 22.6 lm W^–1) at 2.5 V, and 7.1 % and 26.2 lm W^–1 at 2.8 V, respectively. These efficiencies are among the highest reported for solid‐state light‐emitting electrochemical cells, and indicate that cationic transition‐metal complexes containing ligands with good steric hindrance are excellent candidates for highly efficient solid‐state electrochemical cells.     

Structure and properties of CE/CTBN/EP blends: II. Effect of EP on the mechanical properties and thermostability of the CE/CTBN system

Carboxyl‐terminated butadiene‐acrylonitrile rubber (CTBN) has often been used to improve the toughness of cyanate ester (CE) resin while sacrificing modulus and thermostability. In this paper, the addition of the appropriate amount of epoxy resin (EP) to the CE/CTBN system is shown to not only increase the modulus and thermostability of the blend, but also improve the toughness. The values of impact strength showed a maximum for the CE/CTBN/EP 100/5/5 blend. The temperature of 10 % weight loss (T₁₀) improves from 376 °C for CE/CTBN 100/5 to 407 °C for the CE/CTBN/EP 100/5/2.5 blend. It is proposed that addition of the appropriate amount of EP can decrease the mobility and increase the stability of CTBN via the reaction between the terminal carboxyl group of CTBN and the hydroxyl group of EP. But a very high EP concentration will decrease the crosslinking density of CE, consequently reducing the mechanical properties and thermostability of the blends. Copyright © 2004 Society of Chemical Industry