Image processing based on seeded spontaneous optical pattern formation by optoelectronic feedback

Spontaneous optical pattern formation from an initial seed optical pattern in an optoelectronic system with optical diffractive feedback is investigated experimentally. We demonstrate that the temporal evolution of the spontaneously formed patterns exhibits a contrast enhancement effect, a spatial filtering effect, and filling of vacant space while the surrounding structures are maintained. These effects allow us to perform image processing of natural fringe patterns, i.e., in our experiments, fingerprint patterns. We also demonstrate image processing with defect invariance for fingerprint patterns.     

Visualization of the information flow through human oculomotor cortical regions by transcranial magnetic stimulation

We investigated the topography of human cortical activation during an antisaccade task by focal transcranial magnetic stimulation (TMS). We used a figure-eight shaped coil, with the stimulus intensity set just above the threshold for activation of the hand motor areas but weak enough not to elicit blinks. TMS was delivered at various time intervals (80, 100, and 120 ms) after target presentation over various sites on the scalp while the subjects performed the antisaccade task. It was possible to elicit a mild but significant delay in saccade onset over 1) the frontal regions (a region 2-4 cm anterior and 2-4 cm lateral to hand motor area) and 2) posterior parietal regions (6-8 cm posterior and 0-4 cm lateral to hand motor area) regardless of which hemisphere was stimulated. The frontal regions were assumed to correspond to a cortical region including the frontal eye fields (FEFs), whereas the parietal regions were assumed to represent a wide region that includes the posterior parietal cortices (PPCs). The regions inducing the delay shifted from the posterior parietal regions at an earlier interval (80 ms) to the frontal regions at a later interval (100 ms), which suggested an information flow from posterior to anterior cortical regions during the presaccadic period. At 120 ms, the effect of TMS over the frontal regions still persisted but was greatly diminished. Erroneous prosaccades to the presented target were elicited over a wide cortical region including the frontal and posterior parietal regions, which again showed a forward shift with time. However, the distribution of effective regions exhibited a clear contralateral predominance in terms of saccade direction. Our technique provides a useful method not only for detecting the topography of cortical regions active during saccadic eye movement, but also for constructing a physiological map to visualize the temporal evolution of functional activities in the relevant cortical regions.     

氯碱工业废气二氧化碳资源化利用研究现状

以CO2加H2资源化利用技术为分析点,分析CO2加氢合成甲醇技术、催化剂研究现状.CO2加氢制甲醇可以减少碳排放,并带来一定的经济效益.     

A novel flow-resistor network model for characterizing enhanced geothermal system heat reservoir

The fracture characteristics of a heat reservoir are of critical importance to enhanced geothermal systems, which can be investigated by theoretical modeling. This paper presents the development of a novel flow-resistor network model to describe the hydraulic processes in heat reservoirs. The fractures in the reservoir are simplified by using flow resistors and the typically complicated fracture network of the heat reservoir is converted into a flow-resistor network with a reasonably simple pattern. For heat reservoirs with various fracture configurations, the corresponding flow-resistor networks are identical in terms of framework though the networks may have different section numbers and the flow resistors may have different values. In this paper, numerous cases of different section numbers and resistor values are calculated and the results indicate that the total number of flow resistances between the injection and production wells is primarily determined by the number of fractures in the reservoir. It is also observed that a linear dependence of the total flow resistance on the number of fractures and the relation is obtained by the best fit of the calculation results. Besides, it performs a case study dealing with the Soultz enhanced geothermal system (EGS). In addition, the fracture numbers underneath specific well systems are derived. The results provide insight on the tortuosity of the flow path between different wells.     

C2H6/C3H8影响CH4爆炸极限参数及动力学特性研究

为研究C₂H₆/C₃H₈对甲烷爆炸极限参数及动力学特性的影响,采用标准的可燃气体爆炸极限测定装置测定了不同配比的C₂H₆/C₃H₈混合气体对甲烷爆炸极限的影响规律,同时得出了氮气惰化条件下甲烷爆炸临界参数的变化规律。此外,利用Chemkin软件模拟了C₂H₆/C₃H₈混合气体对甲烷爆炸过程中中间产物浓度的影响情况,并进行了敏感性分析。结果表明,C₂H₆/C₃H₈的存在降低了甲烷的爆炸上下限,增大了甲烷的爆炸危险度;在氮气惰化过程中甲烷的爆炸上限下降,爆炸下限上升,最终爆炸上下限重合,重合点处甲烷浓度和氮气临界浓度均随C₂H₆/C₃H₈的添加而逐渐减小;此外,C₂H₆/C₃H₈混合气体使甲烷爆炸过程中CO和·H的生成量逐渐增大,而CO₂、·O和·OH的生成量则有下降趋势,通过对爆炸过程中甲烷体积的敏感性分析,发现C₂H₆/C₃H₈的存在在某种程度上促进了甲烷爆炸。对比不同配比的C₂H₆/C₃H₈混合气体,发现C₃H₈含量越高,其对甲烷爆炸过程中相关参数的影响越大,这可为工矿企业的安全生产提供一定的理论依据。     

Harvesting Air and Light Energy via “All-in-One” Polymer Cathodes for High-Capacity,Self-Chargeable,and Multimode-Switching Zinc Batteries

Aqueous rechargeable Zinc (Zn)–polymer batteries are promising alternatives to prevalent Li-ion cells in terms of cost, safety, and rate capability but they suffer from limited specific capacity in addition to poor environmental adaptability. Herein, air and light are successfully utilized from external environments in single near-neutral two-electrode Zn batteries to enable remarkably improved electrochemical performance, fast self-charging, and switchable multimode-operation from Zn–polymer to Zn–air cells. This system is enabled by a well-designed polyaniline-nanorod-array based “all-in-one” cathode combining reversible redox capability, oxygen reduction activity, and photothermal-responsiveness. The initiative design allows perfect integration of multiple energy harvesting from ambient “air” and light, energy conversion, and storage in one single cathode. Thus, it can act as an efficient light-assisted electrically-rechargeable Zn–polymer cell featuring the highest specific capacity of 430.0 mAh g⁻¹ among all existing polymer cathodes. Without external power sources, it can be self-charged to deliver a high discharging capacity of 363.1 mAh g⁻¹ by concurrently harvesting chemical energy from air and light energy for only 20 min. It can also switch to a light-responsive Zn–air battery mode to surmount the output capacity limit of Zn–polymer battery mode for continued electricity supply.     

Performance of serpentine channel based Li-ion battery thermal management system: An experimental investigation

Thermal management of large-scale Li-ion battery packs is of great significance to their safety and life cycle, which would impact their applicability in electric vehicles. Of the many strategies developed for this purpose, indirect liquid cooling has already demonstrated quite high potentials in thermal regulation of such battery systems. In this study, a compact lightweight serpentine wavy channel configuration was chosen to construct an indirect liquid cooling system for a battery module of cylindrical Li-ion cells. The serpentine channel has a number of six internal minichannels. Experimental test data were used to conduct a comprehensive thermal analysis to examine the highest temperature, the maximum temperature difference, and the heat accumulation percentages, and so forth within the battery pack. Results have revealed the ability of the cooling system to maintain the module temperature within appropriate working conditions for electric vehicle applications for most cycling tests including two driving cycles. Furthermore, the analysis insights raised by this study could be useful in understanding the cooling performance of the liquid-based thermal management systems for electric vehicles.     

高韧性和高流动性PP／EPDM共混材料的研制

研究了乙丙橡胶的门尼粘度和结晶性对聚丙烯增韧效果的影响，结果表明，高门尼粘度，部分结晶性橡胶在获得较好韧性的同时不保持较高的刚性，但流动性较差，通过加入ＨＤＰＥ能在复合增韧的同时提高共混物的流动性，添加少量油酸酰胺和硬脂酰胺敢能适当提高共混物的流动性，采用过氧化物降解聚丙烯可以显著提高共混物的流动性，但韧性明显下降，采用可控降解和动态硫化相结合的技术是在得到高韧性，高流动性共混ＰＰ的有效途径。