Design of bandpass–bandpass diplexers using rectangular-, T-, and L-shaped resonators for hybrid power amplifier and 5G applications

Analog Integrated Circuits and Signal Processing - In this paper, two bandpass–bandpass diplexers, based on L-, T- and rectangular-shaped resonators are designed and analyzed, which are used...     

Overaluminizing of a CoNiCrAlY Coating by Inward and Outward Diffusion Treatments

Overaluminizing is a commercially accepted treatment to enhance high temperature oxidation resistance of MCrAlY overlay coatings. In the current investigation, a low pressure plasma-sprayed CoNiCrAlY coating was aluminized by two different growth modes: outward growth and inward growth. The resultant microstructures were characterized by means of scanning electron microscopy, energy dispersive spectroscopy, and X-ray diffraction analysis. The results showed that the final microstructure of both types of overaluminized coatings was similar and included Al-rich NiAl and Ni-rich NiAl zones from the top to the bottom. The details of the microstructures are discussed and compared with the results of simple aluminizing of the nickel-based substrate.     

Design of explicit model predictive control for constrained linear systems with disturbances

On-line model predictive control approaches require the online solution of an optimization problem. In contrast, the explicit model predictive control moves major part of computation offline. Therefore, eMPC enables one to implement a MPC in real time for wide range of fast systems. The eMPC approach requires the exact system model and results a piecewise affine control law defined on a polyhedral partition in the state space. As an important limitation, disturbances may reduce performance of the explicit model predictive control. This paper presents efficient approach for handling the problem of using eMPC for constrained systems with disturbances. It proposes an approach to improve performance of the closed loop system by designing a suitable state and disturbance estimator. Conditions for observability of the disturbances are considered and it is depicted that applying the disturbance’s estimation leads to rejection of the response error. It is also shown that the proposed approach prevents the reduction of feasible space. Simulation results illustrate the advantages of this approach.     

广域保护中基于能量守恒原理的母线及输电线差动保护

提出一种基于能量守恒原理的纵联差动保护,对线路两端或母线各端的有功功率进行比较,若各端功率的和超出整定值,则判定为区内故障。在典型400 kV输电系统模型上,运用MATLAB仿真软件对所提出的原理进行了仿真验证。仿真结果表明,该方法比传统电流比率差动保护更加可靠且计算量小,因而可缩短动作时间。该方法能检测所有故障类型,适应于超高压远距离输电线路。     

“How do you know that I don’t understand?” A look at the future of intelligent tutoring systems

Many software systems would significantly improve performance if they could adapt to the emotional state of the user, for example if Intelligent Tutoring Systems (ITSs), ATM’s, ticketing machines could recognise when users were confused, frustrated or angry they could guide the user back to remedial help systems so improving the service. Many researchers now feel strongly that ITSs would be significantly enhanced if computers could adapt to the emotions of students. This idea has spawned the developing field of affective tutoring systems (ATSs): ATSs are ITSs that are able to adapt to the affective state of students. The term “affective tutoring system” can be traced back as far as Rosalind Picard’s book Affective Computing in 1997.This paper presents research leading to the development of Easy with Eve, an ATS for primary school mathematics. The system utilises a network of computer systems, mainly embedded devices to detect student emotion and other significant bio-signals. It will then adapt to students and displays emotion via a lifelike agent called Eve. Eve’s tutoring adaptations are guided by a case-based method for adapting to student states; this method uses data that was generated by an observational study of human tutors. This paper presents the observational study, the case-based method, the ATS itself and its implementation on a distributed computer systems for real-time performance, and finally the implications of the findings for Human Computer Interaction in general and e-learning in particular. Web-based applications of the technology developed in this research are discussed throughout the paper.     

Dissimilar Joining of Pure Copper to Aluminum Alloy via Friction Stir Welding

In this study, the dissimilar friction stir welding(FSW) butt joints between aluminum alloy 5754-H114 and commercially pure copper were investigated. The thickness of welded plates was 4 mm and the aluminum plate was placed on the advancing side. In order to obtain a suitable flow and a better material mixing, a 1-mm offset was considered for the aluminum plate, toward the butt centerline. For investigating the microstructure and mechanical properties of FSWed joints, optical microscopy and mechanical tests(i.e., uniaxial tensile test and microhardness) were used, respectively.Furthermore, the analysis of intermetallic compounds and fracture surface was examined by scanning electron microscopy and X-ray diffraction. The effect of heat generation on the mechanical properties and microstructure of the FSWed joints was investigated. The results showed that there is an optimum amount of heat input. The intermetallic compounds formed in FSWed joints were Al4Cu9 and Al2Cu. The best results were found in joints with 1000 rpm rotational speed and100 mm/min travel speed. The tensile strength was found as 219 MPa, which reached 84% of the aluminum base strength.Moreover, maximum value of the microhardness of the stir zone(SZ) was attained as about 120 HV, which was greatly depended on the grain size, intermetallic compounds and copper pieces in SZ.     

Modeling-based optimization of a fixed-bed industrial reactor for oxidative dehydrogenation of propane

An industrial scale propylene production via oxidative dehydrogenation of propane(ODHP)in multi-tubular reactors was modeled.Multi-tubular fixed-bed reactor used for ODHP process,employing 10000 of small diameter tubes immersed in a shell through a proper coolant flows.Herein,a theory-based pseudo-homogeneous model to describe the operation of a fixed bed reactor for the ODHP to correspondence ole fin over V_2O_5/γ-Al_2O_3catalyst was presented.Steady state one dimensional model has been developed to identify the operation parameters and to describe the propane and oxygen conversions,gas process and coolant temperatures,as well as other parameters affecting the reactor performance such as pressure.Furthermore,the applied model showed that a double-bed multitubular reactor with intermediate air injection scheme was superior to a single-bed design due to the increasing of propylene selectivity while operating under lower oxygen partial pressures resulting in propane conversion of about 37.3%.The optimized length of the reactor needed to reach 100%conversion of the oxygen was theoretically determined.For the single-bed reactor the optimized length of 11.96 m including 0.5m of inert section at the entrance region and for the double-bed reactor design the optimized lengths of 5.72m for the first and 7.32 m for the second reactor were calculated.Ultimately,the use of a distributed oxygen feed with limited number of injection points indicated a signi ficant improvement on the reactor performance in terms of propane conversion and propylene selectivity.Besides,this concept could overcome the reactor runaway temperature problem and enabled operations at the wider range of conditions to obtain enhanced propylene production in an industrial scale reactor.     

Entropy Generation Due to Natural Convection in a Partially Open Cavity with a Thin Heat Source Subjected to a Nanofluid

This article presents a numerical study of natural convection cooling of a heat source mounted inside the cavity, with special attention being paid to entropy generation. The right vertical wall is partially open and is subjected to copper–water nanofluid at a constant low temperature and pressure, while the other boundaries are assumed to be adiabatic. The governing equations have been solved using the finite volume approach, using SIMPLE algorithm on the collocated arrangement. The study has been carried out for a Rayleigh number in the range 10³ < Ra < 10⁶, and for solid volume fraction 0 <? <0.05. In order to investigate the effect of the heat source and open boundary location, six different configurations are considered. The effects of Rayleigh numbers, heat source and open boundary locations on the streamlines, isotherms, local entropy generation, Nusselt number, and total entropy generation are investigated. The results indicate that when open boundary is located up, the fluid flow augments and hence the heat transfer and Nusselt number increase and total entropy generation decreases.