A 6-GHz 16-kB L1 cache in a 100-nm dual-V/sub T/ technology using a bitline leakage reduction (BLR) technique

This work describes an aggressive SRAM cell configuration using dual-V/sub T/ and minimum channel length to achieve high performance. A bitline leakage reduction technique is incorporated into an L1 cache design using the new cell in a 100-nm dual-V/sub T/ technology to eliminate impacts of bitline leakage on performance and noise margin with minimal area overhead. Bitline delay is 23% better than the best conventional design, thus enabling 6-GHz operation at with 15% higher energy.     

4- and 6-GS/s 4-bit frequency-translating hybrid ADCs in 90-nm CMOS

Two frequency-translating hybrid analog-to-digital converters (FTH-ADCs) are implemented using building blocks that are designed and fabricated in a 90-nm CMOS technology. These blocks include a mixer, a filter, and an ADC that are cascaded to build each analog processing path of the FTH-ADC. The mixer-filter path is designed with sufficient linearity and signal-to-noise-and-distortion ratio (SNDR) to accommodate for the desired resolution of the path ADC. A 4-bit flash ADC structure is used in each path. This path has a signal bandwidth of 0.5 GHz and frequency-translates the input signal into baseband and digitizes it with the sample rate of 2 GHz. Multiple such mixer-filter-ADC paths are then combined together with proper mixing frequencies in order to implement two- and three-channel ADC systems. The two- and three-channel systems have overall input bandwidths of 2 and 3 GHz and effective conversion rates of 4 and 6 GS/s, respectively, while maintaining their single-path resolution across their entire input bandwidths. The implemented architecture provides an extendible solution to improve the speed of ADCs by incorporating them in an FTH-ADC architecture.     

Development of a technique using MCNPX code for determination of nitrogen content of explosive materials using prompt gamma neutron activation analysis method

Nuclear-based explosive detection methods can detect explosives by identifying their elemental components, especially nitrogen. Thermal neutron capture reactions have been used for detecting prompt gamma 10.8 MeV following radioactive neutron capture by ¹⁴N nuclei. We aimed to study the feasibility of using field-portable prompt gamma neutron activation analysis (PGNAA) along with improved nuclear equipment to detect and identify explosives, illicit substances or landmines. A ²⁵²Cf radio-isotopic source was embedded in a cylinder made of high-density polyethylene (HDPE) and the cylinder was then placed in another cylindrical container filled with water. Measurements were performed on high nitrogen content compounds such as melamine (C₃H₆N₆). Melamine powder in a HDPE bottle was placed underneath the vessel containing water and the neutron source. Gamma rays were detected using two NaI(Tl) crystals. The results were simulated with MCNP4c code calculations. The theoretical calculations and experimental measurements were in good agreement indicating that this method can be used for detection of explosives and illicit drugs.     

Variation range based simplification for meaningful symbolic analysis of analog integrated circuits

This paper presents a variation range based symbolic simplification technique, where each circuit parameter is represented via a range of variation. We generate a database to handle the variation ranges of the circuit parameters and perform simulated annealing algorithm to achieve the most compact symbolic expressions. In contrast to the existing techniques, the main advantage of the proposed method is that the simplified symbolic expressions have an acceptable generalizability in the whole ranges of variations of the circuit parameters. The maximum allowable simplification error can be controlled by the user based on the required accuracy level that he needs. Simulation results demonstrate that the proposed method outperforms the conventional techniques in terms of expression complexity, accuracy and generalizability of the simplified expressions. The resultant expressions are only as complicated as necessary to give the required accuracy in the results, which help in giving a better insight into the circuit behavior.     

ZnO nanoparticles and polyaniline blend as an active layer for bulk heterojunction solar cell applications

In this work, a facile and straightforward procedure was introduced to prepare a blend as an active layer for hybrid solar cell applications. The active layer consisting of a blend of ZnO nanoparticles (NPs) and polyaniline (PANI) dispersions was deposited by spin coating on ITO covered glasses. The current density–voltage characteristics were studied under AM1.5G standard illumination, without any encapsulation process. Also, the samples were studied using UV–Vis spectroscopy, energy dispersive X-ray spectroscopy (EDS) and field emission-scanning electron microscopy. The investigation is limited just to the active layer, so the cells were fabricated without any interlayer. The effect of various volume ratios of ZnO–NPs:PANI solutions, thickness and the annealing temperature of the active layer on the open circuit voltage and the short circuit current density of the cells were investigated. Moreover, the blending time of ZnO–NPs:PANI dispersions as a significant factor for achieving the optimum results were studied.     

Fragility assessment of an outrigger structure system based on energy method

Fragility curves development in structures has always been a focus of research interest among structural and earthquake engineers for which the maximum story drift is usually considered as the engineering demand parameter (EDP) known as the conventional approach. This paper aims at calculating the fragility curves of a tall building with outrigger braced system by considering the plastic strain energy as the EDP and compare it with the conventional approach. In addition, the effect of optimizing the position of outriggers on the exceedance probability of the structure under near- and far-fault seismic loadings is investigated in this paper. Fragility curves of this structure in four performance levels including immediate occupancy (IO), life safety (LS), collapse prevention (CP), and instability is extracted based on the conventional method. The fragility curves for the aforementioned performance levels are also extracted based on the plastic strain energy and compared with the conventional approach. The results have demonstrated that optimizing the location of the bracing system would lower the exceedance probability of the structure. Moreover, the exceedance probability of the investigated building with outrigger braced system under far-fault records in various levels is more than that of near-fault records. It is also concluded that the conventional approach would lead to more conservative results compared with the energy approach.     

The composite effect of steel fibres and stirrups on the shear behaviour of beams using self-consolidating concrete

Based on the investigation of the influence of steel fibre on the workability of fresh self-consolidating concrete (SCC), this paper presents the experimental results carried out on a series of simply supported SCC rectangular beams, using steel fiber reinforcement with and without stirrups, and subjected to four-point symmetrically placed vertical loads. The major test variables are the steel fibre content and stirrup ratios. The current study on the shear strength of conventional reinforced concrete (RC) beams verifies the shear strength of SCC beams with steel fibres. The investigation indicates that the shear strength significantly increases by increasing the fibre content; the addition of steel fibres in an adequate percentage can change the failure mode from a brittle shear collapse into a ductile flexural mechanism. The stirrups can be partially replaced by steel fibres. The combination of steel fibres and stirrups demonstrates a positive composite effect on the mechanical behaviour. The shear strength recorded experimentally is compared with the value obtained from the proposed formula, and the correlation is satisfactory.     

Closed-form expression for optimal two-user MIMO unitary precoding

In this paper we investigate the problem of optimal unitary precoding for multiuser multiple-input multiple-output (MIMO) wireless communication systems. In the case that there exist two users, we derive a closed-form solution for the unitary precoder that maximizes the sum rate. To provide additional insight, the optimal precoder is also characterized in several asymptotic regimes. Monte Carlo simulation results are also provided.     

Demonstration of wavelength-insensitive biasing using an electrooptic polymer modulator

Wavelength-insensitive biasing (WIB) of an optical intensity modulator was demonstrated using the photobleaching technique to control the initial phase difference of the electrooptic polymer modulator. The WIB technique reduced the wavelength sensitivity of the bias point at 1550 nm by a factor of 17.