电磁干扰领域中最新分析及计算技术

通过实例阐述了电磁干扰问题中的分析与计算技术，并介绍了在此领域中用于分析与计算的软件工具。     

Computer Analysis of Impedance Effects in Large Grounding Systems

In large plants with high primary fault levels, the whole plant must be considered as forming the ground grid for the return of primary fault current. The internal impedance of the equivalent ground grid must be taken into account in grid potential rise calculations, as grid potentials transferred from one area of the plant may cause hazardous touch potentials at other locations. Field measurements and computer analyses to calculate the distribution of grid potential rise in a large grounding system are presented.     

Analysis of deformations and stresses in balanced and unbalanced adhesively bonded single-strap joints

Adhesively bonded joints are increasingly being used in joining various structural components. Adequate understanding of the behaviour of adhesively bonded joints is necessary to ensure efficiency, safety and reliability of such joints. While several joint configurations, such as the single- and double-lap joints have received considerable consideration, the single-strap joint configuration has received little attention, partly because earlier studies have shown it to be the least efficient.

One of the objectives of this paper is to demonstrate that strap joints can be as efficient as lap joints, as long as they are properly designed. This will be done through a detailed analytical investigation into influence of the parameters that govern peak stresses in the adhesive. The next objective is to produce simple equations by which the design of strap joint could be facilitated in an effective manner. For this, the developed analytical expressions are simplified and shown to provide accurate results. The derived solutions provide better insight into understanding the parameters that most influence the edge forces.     

Simultaneous Microwave Extraction and Separation of Volatile and Non-Volatile Organic Compounds of Boldo Leaves. From Lab to Industrial Scale

Microwave extraction and separation has been used to increase the concentration of the extract compared to the conventional method with the same solid/liquid ratio, reducing extraction time and separate at the same time Volatile Organic Compounds (VOC) from non-Volatile Organic Compounds (NVOC) of boldo leaves. As preliminary study, a response surface method has been used to optimize the extraction of soluble material and the separation of VOC from the plant in laboratory scale. The results from the statistical analysis revealed that the optimized conditions were: microwave power 200 W, extraction time 56 min and solid liquid ratio of 7.5% of plants in water. Lab scale optimized microwave method is compared to conventional distillation, and requires a power/mass ratio of 0.4 W/g of water engaged. This power/mass ratio is kept in order to upscale from lab to pilot plant.     

Constitutive modeling of the mechanical behavior of high strength ferritic steels for static and dynamic applications

A constitutive relation is presented in this paper to describe the plastic behavior of ferritic steel over a broad range of temperatures and strain rates. The thermo-mechanical behavior of high strength low alloy (HSLA-65) and DH-63 naval structural steels is considered in this study at strains over 40%. The temperatures and strain rates are considered in the range where dynamic strain aging is not effective. The concept of thermal activation analysis as well as the dislocation interaction mechanism is used in developing the flow model for both the isothermal and adiabatic viscoplastic deformation. The flow stresses of the two steels are very sensitive to temperature and strain rate, the yield stresses increase with decreasing temperatures and increasing strain rates. That is, the thermal flow stress is mainly captured by the yield stresses while the hardening stresses are totally pertained to the athermal component of the flow stress. The proposed constitutive model predicts results that compare very well with the measured ones at initial temperature range of 77 K to 1000 K and strain rates between 0.001 s⁻¹ and 8500 s⁻¹ for both steels.     

Facile green synthesis, optical and photocatalytic properties of zinc oxide nanosheets via microwave assisted hydrothermal technique

Novel hexagonal two dimensional ZnO nanosheets were successfully and economically synthesized using zinc acetate and urea based on a facile microwave hydrothermal method. The structure, morphology and size of the ZnO nanosheets were investigated by X-ray diffraction (X-ray), field emission scanning electron microscopy (FESEM), energy dispersive analysis of x-ray (EDS), transmission electron microscopy (TEM), selected area electron diffraction (SAED) and Fourier transform infrared spectroscopy (FTIR). X-ray analysis showed that the obtained ZnO nanosheets are crystalline corresponding to the pure ZnO phase with an average particle size of 12 nm. Optical properties of ZnO nanosheets were investigated by UV-Vis absorption and photoluminescence (PL) techniques. The band gap energy of ZnO nanosheets was found to be 3.29 eV. The photoluminescence (PL) measurement shows a strong UV emission, blue emission and blue-green emission bands. ZnO nano sheets possess a higher photocatalytic activity leading to the degradation of methylene blue (MB). The ZnO nanosheets are expected to have new opportunities in vast research areas and for application in catalysts and optoelectronic devices.     

Stochastic economic analysis of FACTS devices on contingent transmission networks using hybrid biogeography-based optimization

Electrical Engineering - Flexible AC transmission systems (FACTS) devices have advantages of enhancing AC system controllability and stability, increasing power transfer capability and relieving...     

Electroless nano zinc oxide–activate carbon composite supercapacitor electrode

An electroless deposition process was used to synthesize the nanostructured zinc oxide (ZnO)–activated carbon (AC) as supercapacitor. The composite oxide was studied by high resolution transmission electron microscopy (HRTEM), scanning electron microscopy (FESEM), energy dispersive X-ray spectroscopy (EDX) and X-ray diffraction analysis (XRD). The electrochemical performance of the nanocomposite was analyzed through cyclic voltammetry (CV) and AC impedance spectroscopy (EIS) in 0.1 M Na₂SO₄ as electrolyte. A specific capacitance 187 F g^?1 at a scan rate of 5 mV s^?1 was obtained using cyclic voltammetry (CV) and a nearly rectangular shaped CV curve was observed for the composite oxide. The supercapacitor was quite stable during charge–discharge cycling and exhibited constant capacitance during the long-term cycling. It also yielded a specific capacitance 171 F g^?1 at 5 mA cm^?2 with a high energy density of 21.9 Wh kg^?1 and 4.2 kW kg^?1 of power density. Due to unique structure of prepared ZnO–AC nanocomposite, it is a promising candidate for supercapacitor.     

Preparation and characterization of novel derivatives of chitosan and trimethyl chitosan conjugated with dipeptides and vitamin B12 as candidates for oral delivery of insulin

Chitosan and its derivatives are widely used in drug delivery systems due to their bio-degradebility, bio-compatibility and absorption enhancing properties. Many peptide and protein derived therapeutics cannot be administered through oral rout because of the proteolytic condition of gastro-intestinal tract and their low bio-availability. Insulin is a peptide drug which is widely used in diabetics as repeated daily injection. Due to the fact that there are receptors for didpeptides and vitamine B12 in small intestine, in this research work novel derivatives of chitosan and trimethyl chitosan conjugated with glycyl-glycine, alanyl-alaninie and vitamine B12 were synthesized and characterized. The structure of conjugates as well as substitution of different functional groups was confirmed by different instrumental analytical methods such as Fourier transform infrared, magnetic resonance, and X-ray diffraction spectroscopy. Nano-particles of aforementioned loaded with insulin were prepared and their size, surface electrical charge and morphology characterized and their release profile were studied. The results are promising and reveal that these new chitosan and trimethyl chitosan derivatives are potential vehicles for protein and peptide drug molecules.     

Effect of the nanoparticles in the stability of hydrolyzed polyacrylamide/resorcinol/formaldehyde gel systems for water shut-off/conformance control applications

The main objective of this work is to evaluate the inclusion of nanoparticles to partially hydrolyzed polyacrylamide/resorcinol/formaldehyde gel systems to improve the stability under static and dynamic conditions. Oxide nanoparticles (<100 mg·L⁻¹) of SiO₂, Al₂O₃, MgO, and Cr₂O₃ were employed and characterized by their physicochemical properties. Gels were prepared and subsequently placed at 70 °C for evaluating the nanoparticles influence in gel strength through rheological properties and syneresis measurements. Al₂O₃ nanoparticles showed the highest potential for the reduction of the syneresis phenomena, followed by MgO and Cr₂O₃. The SiO₂ nanoparticles lead to a higher degradation of the gel. As the zeta potential increases, the syneresis of the gel system decreases. The nanoparticles did not significantly affect the storage modulus, describing similar gel strength than the original gel. Also, displacement tests showed an incremental of 64% of oil recovery regarding the system in the absence of Al₂O₃ nanoparticles. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47568.