DLSA: Delay and Link Stability Aware Routing Protocol for Flying Ad-hoc Networks (FANETs)

Flying Ad-hoc Network (FANET) is a new class of Mobile Ad-hoc Network in which the nodes move in three-dimensional (3-D) ways in the air simultaneously. These nodes are known as Unmanned Aerial Vehicles (UAVs) that are operated live remotely or by the pre-defined mechanism which involves no human personnel. Due to the high mobility of nodes and dynamic topology, link stability is a research challenge in FANET. From this viewpoint, recent research has focused on link stability with the highest threshold value by maximizing Packet Delivery Ratio and minimizing End-to-End Delay. In this paper, a hybrid scheme named Delay and Link Stability Aware (DLSA) routing scheme has been proposed with the contrast of Distributed Priority Tree-based Routing and Link Stability Estimation-based Routing FANET’s existing routing schemes. Unlike existing schemes, the proposed scheme possesses the features of collaborative data forwarding and link stability. The simulation results have shown the improved performance of the proposed DLSA routing protocol in contrast to the selected existing ones DPTR and LEPR in terms of E2ED, PDR, Network Lifetime, and Transmission Loss. The Average E2ED in milliseconds of DLSA was measured 0.457 while DPTR was 1.492 and LEPR was 1.006. Similarly, the Average PDR in %age of DLSA measured 3.106 while DPTR was 2.303 and LEPR was 0.682. The average Network Lifetime of DLSA measured 62.141 while DPTR was 23.026 and LEPR was 27.298. At finally, the Average Transmission Loss in dBm of DLSA measured 0.975 while DPTR was 1.053 and LEPR was 1.227.

     

Understanding the Time and Frequency Varying Characteristics of a Multipath Wireless Channel

Designing a spectrally efficient wireless channel requires a comprehensive understanding of its time and frequency varying characteristics, making it a stochastic medium of communication. These characteristics become more challenging to cater at the receiving terminal in a multipath transmission. This is because of the fading effect and Doppler shift of the transmitted frequency, specifically in cellular mobile radio systems and vehicle to vehicle communications. This paper presents the modeling, simulation, and then characterization of a cellular mobile radio multipath channel over its time and frequency varying fading gain. For this purpose, a discrete-time Finite Impulse Response (FIR) type filter of such a channel is designed, modeled, and simulated using time and frequency varying characteristics of the received signal. The simulated channel response is further analyzed in terms of coherence bandwidth, coherence time, delay spread, Doppler spread, and symbol time.

     

Structural,Electrical and Photoresponse Properties of Si-based Diode with Organic Interfacial Layer Containing Novel Cyclotriphosphazene Compound

The electrical and photoresponse properties of Al/p-Si/organic layer/Al diode were investigated. Organic layer containing novel 2,2-bis[spiro(7,8-dioxy- 4-methylcoumarin)]-4,4,6,6-bis[spiro(2’,2”-dioxy-1’,1”- biphenylyl)]cyclotriphosphazene compound was coated by drop casting method on p-Si having ohmic contact. The structural characterization of novel cyclotriphosphazene compound was confirmed by using ¹H, ¹³C and ³¹P-NMR, elemental analysis and FT-IR spectroscopic techniques. The diode exhibits a photoconducting and photodiode behavior under solar light illumination. The electrical parameters such as ideality factor, barrier height and series resistance of the diode were determined from I-V characteristics. It is seen that the photocurrent of the diode under illumination is higher than dark current. Also, the frequency dependence of capacitance (C) and conductance (G) was explained on the basis of interface states. It is evaluated that the hybrid photodiode can be used as a photosensor in organic photodetector applications.     

Influence and comparison of emerging techniques of yarn manufacturing on physical–mechanical properties of polyester-/cotton-blended yarns and their woven fabrics

Abstract

In this study, the physical–mechanical properties of ring spun, ring compact, rotor and air-vortex yarns were investigated. The study was carried with yarn having linear densities of 24.4 tex and 36.7 tex, which were then converted to woven fabrics. The ring spun yarns have higher values of strength but also with higher strength irregularities. Extra-ordinarily low hairiness was observed in air-vortex yarns due to its unique yarn formation technique. The deviation rate (DR) of yarns have correlation with the mass spectrogram of respective yarns obtained from USTER Tester 5. Rotor and air-vortex yarns exhibited higher coefficient of friction. The woven fabrics made from ring spun yarns exhibited higher tensile and tear strength with higher elongation at break. The fabrics made from air-vortex yarns have very good pilling grade due to less protruding fibres on their surface and good structural integrity.     

Analysis of nonlinear thermal radiation and higher‐order chemical reactions on the non‐orthogonal stagnation point flow over a lubricated surface

A numerical study is performed to discuss the heat and mass transfer on oblique stagnation point flow over a lubricated surface with nonlinear thermal radiation and higher‐order chemical reactions. The problem is formulated using basic conservation laws of mass, momentum, energy, and mass concentration in terms of partial differential equations along with nonlinear boundary conditions. These governing equations are transformed into ordinary differential equations by means of similarity transformations. The system of resulting ordinary differential equations are solved numerically by an implicit finite difference scheme known as the Keller–box method. The quantities elaborated in the problem, such as velocity, temperature, skin friction, and local Nusselt and Sherwood numbers are analyzed for several values of involved parameters. The obtained results are presented through various graphs and tabular data and showed a good agreement with the existing results in the literature, which are the subcases of the present work. The heat transfer rate enhances with nonlinear thermal radiation and mass transfer rate decreases with increasing the order of chemical reaction.     

Inhomogeneous flow model of natural convection,entropy generation,and heatlines visualization in wavy I-shaped enclosure with rectangular heater

The present investigation is on examination of the natural convection and entropy generation considering the heatlines visualization of nanofluid I-shaped enclosure with two corrugated walls considering inner rectangular heater of three different heights. The influence of Brownian motion along with thermophoresis had been implemented using Inhomogeneous two-phase model of nanofluid. The governing equations were solved numerically using COMSOL software. Influence of Rayleigh number $$, Buoyancy ratio number $$, Lewis number $$, heater length $$. The results indicate that the influence of Lewis number on heat transfer bettering is stronger at high Rayleigh number $$ while its impact is negligible at a lower value of Rayleigh number (conduction mode). In addition, the total entropy generation gets its highest value at Lewis number $$. Bejan number, fluid flow strength and heat rate increase as the rectangular heater height increases. Also, higher heat transfer augmentation is taken when the heater height is $$ while increasing the heater height to $$ leads to more total entropy generation. The impact of heater height on total entropy generation is highly affected by Rayleigh number as increasing the heater height from $$ into $$, total entropy generation increases by $$ at $$ while it increases by $$ at $$.     

Fiber Quality Evaluation of Pakistan’s Locally Developed Cotton Varieties for Yarn Manufacturing

This paper discusses relation between fiber quality parameters and yarn quality, presenting results of the quality assessment of Pakistan’s five popular cotton varieties. Abadgar-901 was found to have highest effective length followed by Tarzen-1 when compared to other fibers studied and the Sattari showed the least effective length. Whereas, Tarzen-1 showed highest tenacity, Sindh-1 was second to that, yet Nayab-78 showed the least strength of the studied cotton fibers. Further, it was also found that except Nayab-78, all the other cotton varieties were found to have fineness value of premium cotton standards, however, Nayab proved to be a coarse fiber, Sindh-1 was finest fiber of them all. Moreover, Sattari was found to be the whitest in color when measured for CIE and Berger whiteness index, Nayab-78 followed it just after and the Abadgar proved to be the least white compared to the studied cotton varieties.     

Tailoring (1)H Spin Dynamics in Small Molecules via Supercooled Water: A Promising Approach for Metabolite Identification and Validation

Metabolic mixtures are often analyzed via NMR spectroscopy as it provides a metabolic profile without sample alteration in a noninvasive manner. These mixtures however tend to be very complex and demonstrate considerable spectral overlap resulting in assignments that are sometimes ambiguous given the range of current NMR methods available. De novo molecular identification in these mixtures is generally accomplished using chemical shift information and J-coupling based experiments to determine spin connectivity information, but these techniques fall short when a molecule of interest contains nonrelaying centers. A method is presented here that enhances intramolecular spatial interactions via supercooled water and uses the resulting spatial correlations to edit mixtures. This is accomplished by utilizing nuclear Overhauser effect spectroscopy (NOESY) at subzero temperatures in capillaries to enhance NOE and provide more complete spin systems. This technique is applied to a standard mixture of three known molecules in D(2)O with overlapping resonances and is further demonstrated to assign molecules in a worm tissue extract. The current method proves to be a powerful complement to existing methods such as total correlation spectroscopy (TOCSY) to expand the range of molecules that can be assigned in situ without physical separation of mixtures.     

Suitability of Different Food Grade Materials for the Encapsulation of Some Functional Foods Well Reported for Their Advantages and Susceptibility

Functional foods find a very important place in the modern era, where different types of cancer, diabetes, cardiovascular diseases, etc. are on a high. Irrespective of the abundance of bioactive components in different fruits and vegetables, their low solubility in aqueous solution, vulnerability to destruction in different environmental and gastrointestinal conditions and a low intestinal absorption becomes a concern. Because it is quite difficult to commercialize non food materials for the food encapsulation purposes due to their safety concerns in the human body, scientists in the recent times have come up with the idea of encapsulating the different bioactive components in different food grade materials that are able to safeguard these bioactive components against the different environmental and gastrointestinal conditions and ensure their safe and targeted delivery at their absorption sites. Different food grade encapsulation materials including various oligosaccharides, polysaccharides (starch, cyclodextrins, alginates, chitosan, gum arabic, and carboxymethyl cellulose) and proteins and their suitability for encapsulating various bioactive components like flavonoids (catechins, rutin, curcumin, hesperetin, and vanillin), nonflavonoids (resveratrol), carotenoids (β-carotene, lycopene, and lutein), and fatty acids (fish oil, flaxseed oil, and olive oil) of high medical and nutritional value are reviewed here.