Synthesis of phosphorus doped carbon nanotubes using chemical vapor deposition

Phosphorous-doped carbon nanotubes (PCNTs) was prepared via two-step methodology employing chemical vapor deposition, by using available starting materials and catalyst. First, CNTs was produced from acetylene gas at 750 ºC and then, PCNTs have been prepared with total yield of 44% by recooking of the prepared CNT with Ph₃P at 600 ºC. The product was characterized with FESEM, TEM and EDS analyses, which confirmed its nanotube shape and the presence of phosphorous atom. The high thermal stability of the product was obtained from TGA analysis, showing only 16.5% weight loss up to 890 ºC. The Raman spectrum of the product showed the I_D/I_G ration equal to 0.84. Moreover, the catalytic potency of the product has been examined in ORR electrochemical reaction using CV and LSV diagrams. The results confirmed appropriate catalytic activity and high stability of the product for this process.     

Vicious cycle during chemical degradation of sulfonated aromatic proton exchange membranes in the fuel cell application

Weak phase separation and vulnerable linking groups between aromatic units are common setbacks of sulfonated aromatic proton exchange membranes (PEMs) from durability point of view. In this study, sulfonated poly(ether ether ketone) (SPEEK) membranes were exposed to Fenton's solution for a specific time, ranging from 10 to 60 minutes. Chemical structure and morphology evolution, decay in mechanical and thermal stability, and H₂ permeability of SPEEK membranes were evaluated during the chemical degradation. Less-entangled polymeric chains with lower average molecular weight of degraded SPEEK samples diminished mechanical rigidity. In addition, reduction of aromatic rings in each repeat unit led to higher thermal decomposition rate. Furthermore, randomly distributed micro-defects in the SPEEK morphology and an increase in water sorption can reduce the fatigue strength of membranes in the wet-dry cycles. Eventually, hydrogen cross-over rate was gradually increased, and henceforth, accelerated destructive radical formation and degradation can be predicted.     

H2S Reactive Absorption from Off‐Gas in a Spray Column: Insights from Experiments and Modeling

H₂S removal from an off‐gas stream was performed in a spray column by H₂S reactive absorption into a NaOH solution. The individual and interactive effects of three independent operating variables on the percentage of absorbed H₂S were investigated: the initial pH of the scrubbing solution, the initial scrubbing solution temperature, and the volumetric liquid‐to‐gas ratio. The optimum operating variables were determined by response surface methodology (RSM) attaining a percentage of absorbed H₂S of 98.7 ± 0.2 %. Additionally, the process performance was modeled by an artificial neural network (ANN) to predict the percentage of absorbed H₂S. The results showed that the experimental data agreed better with the ANN model than with the RSM results.     

Targeted design of polyaniline-graphene oxide,barium-strontium titanate,hard-soft ferrite,and polyester multi-phase nanocomposite for highly efficient microwave absorption

The current paper focuses on synthesizing a high-efficiency microwave absorber via incorporating the nanofillers of graphene oxide-polyaniline (GO-PANI), barium-strontium titanate (BST), and soft-hard ferrite within the polyester matrix. The nanocomposite magnets of (Ba_0.5Sr_0.5Fe₁₂O₁₉)_1-x hard/(CoFe₂O₄)_x soft (x = 0.2, 0.5, and 0.8) were prepared using sol-gel auto-combustion method. The GO-PANI and BST were successfully synthesized by in situ polymerization and improved polymerization, respectively. The phase structure, chemical structure, morphology, and microwave absorption properties of the synthesized nanocomposites were characterized by X-ray diffractometer (XRD), Fourier-transform infrared spectroscopy (FT-IR), and scanning electron microscope (SEM), vector network analyzer (VNA) techniques, respectively. The results showed that the synergistic effects of the combination of dielectric (BST), conductive (GO-PANI), and magnetic materials (hard-soft ferrites) provided the reflection loss values of less than ?20 dB (>99% absorption) in the X-band region. The minimum reflection loss of ?35 dB (>99.99% absorption) was obtained by the optimal formulation including (Ba_0.5Sr_0.5Fe₁₂O₁₉)_0.2 (CoFe₂O₄)_0.8, and the weight ratio of 1: 2 for both BST/soft-hard ferrite and hard-soft ferrite + BST/GO-PANI with the thickness of 1 mm. According to the results, the thickness factor plays a key role in improving the impedance matching. Consequently, the proposed nanocomposite can be employed as a novel kind of microwave absorbers with good impendence matching and high absorption.     

AMBO: All Members-Based Optimizer for Solving Optimization Problems

There are many optimization problems in different branches of science that should be solved using an appropriate methodology. Population-based optimization algorithms are one of the most efficient approaches to solve this type of problems. In this paper, a new optimization algorithm called All Members-Based Optimizer (AMBO) is introduced to solve various optimization problems. The main idea in designing the proposed AMBO algorithm is to use more information from the population members of the algorithm instead of just a few specific members (such as best member and worst member) to update the population matrix. Therefore, in AMBO, any member of the population can play a role in updating the population matrix. The theory of AMBO is described and then mathematically modeled for implementation on optimization problems. The performance of the proposed algorithm is evaluated on a set of twenty-three standard objective functions, which belong to three different categories: unimodal, high-dimensional multimodal, and fixed-dimensional multimodal functions. In order to analyze and compare the optimization results for the mentioned objective functions obtained by AMBO, eight other well-known algorithms have been also implemented. The optimization results demonstrate the ability of AMBO to solve various optimization problems. Also, comparison and analysis of the results show that AMBO is superior and more competitive than the other mentioned algorithms in providing suitable solution.     

Amino Functionalized Nano Fe3O4@SiO2 as a Magnetically Green Catalyst for the One-Pot Synthesis of Spirooxindoles Under Mild Conditions

(3-Aminopropyl)-triethoxysilane attached to Fe₃O₄@SiO₂ nanoparticles has been characterized by powder X-ray diffraction, vibrating sample magnetometer, scanning electronic microscope, transmission electron microscope, energy dispersive X-ray, thermal gravimetric analysis, and Fourier transform infrared spectroscopy. The prepared nanoparticles employed as a heterogeneous catalyst in the synthesis of spirooxindoles derivatives in one-pot four-component reactions of isatin, methyl cyanoacetate or malononitrile, hydrazine hydrate, and ethyl acetoacetate. Amino-functionalized magnetic nanoparticles showed high catalytic activity in mild reaction conditions and excellent yields of products in short reaction times. Also, this nanocatalyst can be easily recovered by a magnet and reused for subsequent reactions for at least 5 times without noticeable loss in catalytic activity.