A computational study of adsorption H2S gas on the surface of the pristine,Al&P-doped armchair and zigzag BNNTs

Density function theory is used to study the H₂S adsorption on the surface of pristine, Al-, P- and Al&P- doped (4, 4) armchair and (8, 0) zigzag BNNTs. All considered different models for H₂S adsorption on the exterior and interior surface of nanotube are optimized by using B3LYP/6-31G (d, P) level of theory. The adsorption energy values (E_ads) of the B-I, B-II,C-I, D-I, D-II, F-I, F-II and H-II models are negative, while the E_ads values for the A-III, B-III, C-III, D-III, E-III, F-III, G-III and H-III models are positive. On the other hand, Al, P and Al&P doped in all models increase significantly the adsorption energy of H₂S on the surface of BNNTs, and so the selectivity of nanotube for adsorbing and making a sensor of H₂S increase significantly from original state. The positive values of the charge transfer parameters (ΔN) and more values of the electronic chemical potentials of H₂S gas for all studied models demonstrate that H₂S gas in this system has a donor electron effect on the nanotube. The MEP results display that a low charge transfer occurs from H₂S gas toward nanotube, resulting in a weak ionic bonding in the BNNTs’ surface.     

Toward a Magnesium‐Iodine Battery

The quest for new electrolyte and cathode materials is a crucial point for beyond‐lithium‐ion energy storage systems. Following this, an electrolyte for secondary magnesium batteries based on a new iodoaluminate ionic liquid and δ‐MgI₂ is reported. Promising electrochemical performance in terms of Mg plating‐stripping, coulombic efficiency, and conductivity, demonstrates the potential of this iodine‐based system for future Mg secondary batteries.     

Solvent effect in phase separation for fabrication of micropatterned porous scaffold sheets

Cellular orientation control is important for tissue regeneration. Design of oriented structures for cells with suitable features can be used in tissue engineering. One of the methods of cellular orientation with the aim of regenerating which damaged tissues is utilizing oriented biocompatible substrates. This paper reports a one-step method with different solvents to fabricate porous micropatterned polyhydroxybutyrate scaffold sheets. The results indicated that the porosity and pore morphology of the scaffolds are viable with respect to proliferation rate, and a micropattern for cell alignment. Stem cells culturing proved that the scaffold sheets are suitable for cell culturing. Preliminary experiments indicate that the 2-D scaffold sheets are very promising as basis for building 3-D scaffolds.     

Thermal decomposition synthesis,characterization and electrochemical hydrogen storage characteristics of Co3O4–CeO2 porous nanocomposite

Particle-like Co₃O₄–CeO₂ nanocomposite was synthesized via a facile thermal decomposition process in the presence of fructose as a green capping agent and ammonium cerium(IV) nitrate as Ce source. The effect of various parameters such as different cobalt sources, calcination temperature and time were investigated on the size and morphology of products. The transmission electron microscopy observations indicated that the synthesized products have a particle-like shape with an average diameter of 18–35 nm. For the first time, the electrochemical hydrogen storage performance of Co₃O₄–CeO₂ porous nanocomposite was investigated via chronopotentiometry method in aqueous KOH solution in this paper. The electrochemical measurements showed that this product has a good hydrogen storage capacity at room temperature. Its maximum discharge capacity was 5200 mAh/g after 20 cycles. Therefore, Co₃O₄–CeO₂ porous nanocomposite showed that it is a good candidate for electrochemical hydrogen storage.     

Synthesis and characterization of poly(methacrylates) containing spiroacetal and norbornene moieties in side chain

A four‐step synthetic strategy was applied to achieve novel methacrylic monomers. 5‐Norbornene‐2,2‐dimethanol was prepared from a Diels–Alder reaction of cyclopentadiene and acrolein, followed by the treatment of the adduct with an HCHO/KOH/MeOH solution. The resulting 1,3‐diol (1) was then acetalized with different aromatic aldehydes having OH groups on the ring to produce four spiroacetal derivatives. The reaction of methacryloyl chloride with the phenolic derivatives led to four new methacrylic monomers that were identified spectrochemically (mass, FTIR, ¹H‐NMR, and ¹³C‐NMR spectroscopy). Free radical solution polymerization was used to prepare novel spiroacetal–norbornene containing polymethacrylates, which were characterized by FTIR and ¹H‐NMR spectroscopy and differential scanning calorimetry and thermogravimetric thermal analysis. Gel permeation chromatography was performed to determine molecular weight averages and polydispersity. The polymethacrylate having naphthalenic nuclei was recognized to be the highest molecular weight polymer (M̄_n = 12144, η_inh = 0.80 dL/g) with the highest thermal stability. All the polymers showed good solubility in a variety of common organic solvents. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 30–38, 2000     

Enhancement of in vitro antitumour activity of epirubicin in HER2+ breast cancer cells using immunoliposome formulation

Epirubicin (EPI) is one of the potent breast cancer (BC) chemotherapeutic agents, but its adverse effects limit its efficacy. Herein, EPI was selected to be loaded in liposomal carrier, which has been targeted by a monoclonal antibody, Herceptin. The preparation process of liposomes was a modified ethanol injection method followed by Herceptin conjugation. The in vitro cell toxicity and cellular uptake of optimum formulation against HER2+ and HER2− cancer cell lines were evaluated. The results showed that the drug loading (DL%) and encapsulation efficiency (EE%) of liposome preparation method yielded 30.62% ± 0.49% and 62.39% ± 8.75%, respectively. The average size of naked liposomes (EPI‐Lipo) and immunoliposomes (EPI‐Lipo‐mAb) was 234 ± 9.86 and 257.26 ± 6.25 nm, with a relatively monodisperse distribution, which was confirmed by SEM micrographs. The release kinetic followed Higuchi model for both naked and immunoliposomes. In vitro cytotoxicity study on three different BC cell lines including BT‐20, MDA‐MB‐453 and MCF‐7 demonstrated higher toxicity of EPI in the Herceptin conjugated form (EPI‐Lipo‐mAb) in comparison with the free EPI and EPI‐Lipo in HER2 overexpressing cell line. In addition, the cellular uptake study showed a higher uptake of immunoliposomes by MCF‐7 cells in comparison with naked liposomes. In conclusion, these data show that the targeted delivery of EPI to breast cancer cells can be achieved by EPI‐Lipo‐mAb in vitro, and this strategy could be used for breast cancer therapy with further studies.     

Ion Channels and Transporters in Muscle Cell Differentiation

Investigations on ion channels in muscle tissues have mainly focused on physiological muscle function and related disorders, but emerging evidence supports a critical role of ion channels and transporters in developmental processes, such as controlling the myogenic commitment of stem cells. In this review, we provide an overview of ion channels and transporters that influence skeletal muscle myoblast differentiation, cardiac differentiation from pluripotent stem cells, as well as vascular smooth muscle cell differentiation. We highlight examples of model organisms or patients with mutations in ion channels. Furthermore, a potential underlying molecular mechanism involving hyperpolarization of the resting membrane potential and a series of calcium signaling is discussed.     

Study of macromolecular interactions in low‐fat brined cheese modified with Zedu gum

The functionality of Zedu gum as a fat mimetic in low‐fat brined cheese was studied. The physicochemical, textural, rheological, microstructural and sensory properties of cheese samples modified with 0.1% and 0.25% of Zedu gum were compared to those of control cheeses (low‐fat and full‐fat cheeses with no fat mimetic) during ripening. To obtain further information about the cheeses' structure and interactions between macromolecules (casein protein and Zedu gum), other parameters were analysed by differential scanning calorimetry and Fourier transform infrared (FTIR) spectroscopy. Incorporation of Zedu gum into low‐fat cheese caused an open microstructure and softer texture in comparison with the control low‐fat cheese. The thermal properties and FTIR spectra of the cheeses were influenced by both fat mimetic and ripening time. On days 1 and 60 of ripening time, the lower value of enthalpy of the low‐fat cheese with 0.25 g of Zedu gum/kg of milk (AS 0.25) in comparison with control low‐fat cheese could have been due to the electrostatic nature of the interactions between Zedu gum and casein protein. On both days, the FTIR spectrum of AS 0.25 showed a well separated absorption at 1746 cm^?1 possibly due to the formation of ester groups as a result of the interaction of the carbonyl groups in Zedu gum with the hydroxyl groups of some amino acids in casein.     

Adsorbtion and inhibition effect of thiourea on mild steel in acidic media

The effect of thiourea on electrochemical corrosion behavior of mild steel was investigated in 0.5M HCl solution at room temperature by electrochemical impedance spectroscopy (AC Impedance) and Tafel polarization (DC Polarization) methods. The results show that thiourea act as mixed type inhibitor. The inhibition efficiency obtained from AC Impedance and DC polarization methods are in good agreement. The Nyquist plots show that the corrosion behavior of mild steel in 0.5M HCl solution in the absence and in the presence of thiourea, consist a simple capacitive loop. Changes in impedance parameters (R_ct and C_dl) are indicative of adsorption of thiourea on the metal surface, leading to the formation of protective film. Thiourea is found to adsorb on mild steel surface steel in 0.5M HCl solution, according to the Langmuir adsorption isotherm.     

Radiation dose to neonates undergoing X-ray imaging in special care baby units in Iran

Radiographic imaging has a significant role in the timely diagnosis of the diseases of neonates in intensive care units. The estimation of the dose received by the infants undergoing radiographic examination is of great importance, due to greater more radiosensitivity and longer life expectancy of the neonates and premature babies. In this study, the values of entrance skin dose (ESD), dose area products (DAPs), energy imparted (EI), whole-body dose, effective dose and risk of childhood cancer were estimated using three methods including direct method [using thermoluminescence dosimetry (TLD) chips], indirect method (using tube output) and Monte Carlo (MC) method (using MCNP4C code). In the first step, the ESD of the neonates was directly measured using TLD-100 chips. Fifty neonates, mostly premature, with different weights and gestational ages in five hospitals mostly suffering from respiratory distress syndrome and pneumonia were involved in this study. In the second step, the values of ESD to neonates were indirectly obtained from the tube output in different imaging techniques. The imaging room, incubator, neonates and other components were then simulated in order to obtain the ESD values using the MCNP4C code. Finally, the values of ESD assessed by the three methods were used for calculation of DAP, EI, whole-body dose, effective dose and risk of childhood cancer. The results indicate that the mean ESD per radiograph estimated by the direct, indirect and MC methods are 56.6±4.1, 50.1±3.1 and 54.5±3.3 μGy, respectively. The mean risk of childhood cancer estimated in this study varied between 4.21×10(-7) and 2.72×10(-6).