Thin natural gelatin/chitosan nanofibrous scaffolds for retinal pigment epithelium cells

Damage of the retinal pigmented epithelial cells causes various diseases such as age-related macular degeneration in retinal tissue. Nowadays, scientists are attempting to replace lost retinal cells with healthy and efficient cells that provide better conditions for recovering and preventing blindness. In this study, gelatin/chitosan nanofibrous scaffolds with mean diameters of 180?nm were fabricated for subretinal space through electrospinning. Thickness and morphology of the gelatin–chitosan scaffolds were analyzed by scanning electron microscopy (SEM). The results showed that the high rate of degradation, i.e., 90% damage was obtained after 1 month. The cell viability of gelatin/chitosan nanofibers were measured by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay. The SEM results of cultured RPE on gelatin/chitosan scaffolds showed the appropriate adhesion of cells on the substrate. The results of the identity of RPE cells cultured on the scaffolds indicated that a large number of cells strongly expressed RPE65 and cytokeratin 8/18.     

Prolonged drug release using PCL–TMZ nanofibers induce the apoptotic behavior of U87 glioma cells

In situ prolonged delivery of drugs at the site of tumor can be satisfactorily accelerated patient recovery. We compared the effect of temozolomide while incorporated by polycaprolactone nanofibers on the apoptotic behavior of U87 glioma cells. After biocompatibility evaluation of nanofibers by scanning electron microscope and 3-(4,5-dimethylthiazolyl-2)-2,5-diphenyltetrazolium bromide analysis, the apoptosis of U87 cells was evaluated using p53, Bcl2 and Bax genes expression. It was found that nanofiber-temozolomide group showed a greater ability to induce apoptosis as well as have a significantly diminished initial burst release of drug compared with other groups and have promising potential in treating cancer.     

Mathematical Modeling and Genetic Algorithm Optimization of Reactive Absorption of H2S

A rate‐based mathematical model was developed for the reactive absorption of H₂S in NaOH, with NaOCl or H₂O₂ as the chemical oxidant solutions in a packed column. A modified mass transfer coefficient in the gas phase was obtained by genetic algorithm and implemented in the model to correct the assumption of instantaneous reactions. The effects of different operating variables including the inlet H₂S concentration, inlet gas mass flux, initial NaOH, concentrations of the chemical oxidants in the scrubbing solutions, and liquid‐to‐gas ratio on the H₂S removal efficiency were studied. A genetic algorithm was employed to optimize the operating variables in order to obtain maximum removal efficiency of H₂S. The model results were in good agreement with the experimental data.     

Amino Functionalized Nano Fe3O4@SiO2 as a Magnetically Green Catalyst for the One-Pot Synthesis of Spirooxindoles Under Mild Conditions

(3-Aminopropyl)-triethoxysilane attached to Fe₃O₄@SiO₂ nanoparticles has been characterized by powder X-ray diffraction, vibrating sample magnetometer, scanning electronic microscope, transmission electron microscope, energy dispersive X-ray, thermal gravimetric analysis, and Fourier transform infrared spectroscopy. The prepared nanoparticles employed as a heterogeneous catalyst in the synthesis of spirooxindoles derivatives in one-pot four-component reactions of isatin, methyl cyanoacetate or malononitrile, hydrazine hydrate, and ethyl acetoacetate. Amino-functionalized magnetic nanoparticles showed high catalytic activity in mild reaction conditions and excellent yields of products in short reaction times. Also, this nanocatalyst can be easily recovered by a magnet and reused for subsequent reactions for at least 5 times without noticeable loss in catalytic activity.     

A systematic study on the effects of synthesis conditions of polyamide selective layer on the CO2/N2 separation of thin film composite polyamide membranes

Different top layer fabrication methods (amine-first, acid-first, spin coating), organic phase solvents (hexane, heptane, mixed hexane/heptane), acid acceptors (triethylamine, sodium carbonate, sodium hydroxide), and surfactant sodium dodecyl sulfate concentrations (0, 0.05, and 0.1 wt%) were utilized to fabricate thin film composite polyamide membranes for CO₂/N₂ separation. The results, according to an L9 orthogonal array of Taguchi approach, showed that employing acid-first method increases both CO₂ permeance and CO₂/N₂ selectivity of the membranes at a feed gas pressure of 3 bars. On the other hand, sodium hydroxide, and triethylamine should be used, as acid acceptors, to maximize CO₂ permeance and CO₂/N₂ selectivity, respectively. Moreover, the use of hexane solvent and 0 wt% surfactant led to maximum permeance, while, hexane solvent and 0.1 wt% surfactant were needed to reach the highest selectivity. The above level setting of synthesis parameters also resulted in the minimum sensitivity of the fabrication process to the noise factors effects. As shown by the analysis of variance, acid acceptor, and organic solvent types were the most influential parameters on CO₂ permeance and CO₂/N₂ selectivity, respectively. The effects of fabrication method and surfactant concentration, as single factors, on permeation/selectivity responses were also investigated.     

Effect of seed layers on low-temperature,chemical bath deposited ZnO nanorods-based near UV-OLED performance

Low-temperature wet chemical bath deposition (CBD) method is one of the most efficient and least hazardous solution-based techniques which is widely employed to grow ZnO NRs. In CBD method, a seed layer is usually deposited on the substrate. In this paper, high quality ZnO and aluminum doped ZnO (AZO) seed layers are sputtered on the indium tin oxide (ITO) coated glass. In continue, aligned ZnO NRs are grown on the AZO and ZnO seed layers via CBD technique. The effect of the growth time and seed layer on the physical properties of as-grown ZnO NRs are investigated. According to the results, the seed layer plays an essential role on the growth orientation and growth rate of the ZnO NRs. The ZnO NRs grown on AZO seed layer are more aligned rather than ZnO seed layer due to their higher texture coefficients. The relative photoluminescence (PL) intensity ratio of near band emission (NBE) to deep level emission (DLE) (I_NBE/I_DLE) for the ZnO NRs grown on AZO and ZnO seed layers are calculated as 7.45 and 2.62, respectively. To investigate the performance of the as-grown ZnO NRs, near ultraviolet organic light-emitting diodes (UV-OLEDs) using ZnO NRs array as n-type material and poly [2-methoxy-5-(2-ethyl-hexyloxy)-1,4-phenylene-vinylene] (MEH-PPV) conjugated polymer as p-type material have been fabricated. The total concentration of traps ($N_t$), the characteristic energies ($E_t$) and the turn-on voltages for the devices with the structures of ITO/AZO/ZnO NRs/MEH-PPV/Al (device A) and ITO/ZnO/ZnO NRs/MEH-PPV/Al (device B) are attained 7.65 × 10¹⁶ and 7.75 × 10¹⁶ cm^?3, 0.232 and 0.206 eV, 23 and 21 V, respectively. Moreover, based on the electroluminescence (EL) spectra, the NBE peaks for device A and B are obtained nearly in the wavelengths of 382 and 388 nm, respectively. Finally, various charge carrier transportation processes of prepared UV-OLEDs have been studied, systematically.     

H2S Reactive Absorption from Off‐Gas in a Spray Column: Insights from Experiments and Modeling

H₂S removal from an off‐gas stream was performed in a spray column by H₂S reactive absorption into a NaOH solution. The individual and interactive effects of three independent operating variables on the percentage of absorbed H₂S were investigated: the initial pH of the scrubbing solution, the initial scrubbing solution temperature, and the volumetric liquid‐to‐gas ratio. The optimum operating variables were determined by response surface methodology (RSM) attaining a percentage of absorbed H₂S of 98.7 ± 0.2 %. Additionally, the process performance was modeled by an artificial neural network (ANN) to predict the percentage of absorbed H₂S. The results showed that the experimental data agreed better with the ANN model than with the RSM results.     

Controlled Preparation and Characterization of Nigella Sativa Electrospun Pad for Controlled Release

Silicon - Nigella sativa (NS) oil is an anti-inflammatory agent in the traditional medicine. In the present study, novel electrospun mats contained NS oil/polyacrylonitrile as a sustained release...     

A novel bilayer drug-loaded wound dressing of PVDF and PHB/Chitosan nanofibers applicable for post-surgical ulcers

A novel bilayer nanofibrous wound dressing, with enhanced mechanical properties is successfully fabricated. This membrane, consisted of polyvinylidenefluoride (PVDF) nanofibers for providing tensile strength and polyhydroxybutyrate/chitosan (PHB/CTS) nanofibers loaded with gentamicin with ability of controlled drug delivery, is a great choice for post-surgical ulcers. Mechanical properties showed dramatically improvement of tensile strength by addition of PVDF layer. Gentamycin release represented both an immediate and a sustained release of about 24?h and 1 week, respectively and release increment with increase of CTS ratio. Results also revealed that drug release in structures follow first order kinetic and Fickian release mechanism.