Optimal design of drainage channel geometry parameters in vane demister liquid–gas separators

Vane liquid–gas demisters are widely used as one of the most efficient separators. To achieve higher liquid disposal and to avoid flooding, vanes are enhanced with drainage channels. In this research, the effects of drainage channel geometry parameters on the droplet removal efficiency have been investigated applying CFD techniques. The observed parameters are channel angle, channel height and channel length. The gas phase flow field was determined by the Eulerian method and the droplet flow field and trajectories were computed applying the Lagrangian method. The turbulent dispersion of the droplets was modeled using the discrete random walk (DRW) approach. The CFD simulation results indicate that by applying DRW model, the droplet separation efficiency predictions for small droplets are closer to the corresponding experimental data. The CFD simulation results showed that in the vane, enhanced with drainage channels, fewer low velocity sectors were observed in the gas flow field due to more turbulence. Consequently, the droplets had a higher chance of hitting the vane walls leading to higher separation efficiency. On the other hand, the parameters affect the liquid droplet trajectory leading to the changes in separation efficiency and hydrodynamic characteristic of the vane. To attain the overall optimum geometry of the drainage channel, all three geometry parameters were simultaneously studied employing 27 CFD simulation cases. To interpolate the overall optimal geometry a surface methodology method was used to fit the achieved CFD simulation data and finally a polynomial equation was proposed.     

Formation of toxic aldehydes in cod liver oil after ultraviolet irradiation

Formaldehyde, acrolein, malonaldehyde (MA), acetaldehyde and propanal produced from cod liver oil upon ultraviolet irradiation (λ_max=300 nm) were derivatized into nitrogenor sulfur-containing compounds and then analyzed by capillary gas chromatography with a nitrogen-phosphorus detector or a flame photometric detector. Acrolein and MA were formed at levels of 10.9±3.06 and 190.2±38.4 nmol/mg of fish oil, respectively. Maximum levels of formaldehyde, acetaldehyde and propanal formed were 7.0±0.90, 49.1±4.5 and 35.8±4.0 nmol/mg of oil, respectively. Formation of propanal in large quantities corresponded to the high content of ɛ-3 fatty acids in cod liver oil.     

Electrometallurgical recovery of nickel and vanadium from spent desulphurization catalysts using an acidic leaching–electrolysis technique

Spent desulphurization catalysts are considered a major secondary source of valuable metals. The contents of nickel and vanadium present in these catalysts, accompanied by environmental rules, have attracted scientists to explore diverse options for their effective processing. The electrometallurgy recovery of Ni and V from the spent desulphurization Ni-Mo-V/Al₂O₃ catalyst is described in this study. Using flat plate graphite electrodes, the electrochemical deposition of Ni and V from spent catalyst in an acid solution (HNO₃/H₂SO₄) was investigated. By the central composite design of the response surface methodology, the effect of the operating factors was examined and optimized. At the ideal conditions of reaction temperatures of 84.0 and 42.0°C, electrolysis times of 5.6 and 4.4 h, liquid/solid ratios of 22.7 and 15.4 ml/g, and current densities of 229.0 and 255.6 A/m², respectively, the recovery efficiencies of Ni and V were 81.96% and 93.07%. The statistical analysis revealed that the expected data (R² = 0.9984 and R² = 0.9883) were in good agreement with the observed data (R² = 0.9984), with an average variation from experimental data of 0.78% and 0.65% for the optimum conditions of Ni and V recovery, respectively. It shows that the Ni and V nanoparticles deposited have a spherical form with purities of 84.39% and 90.76%, respectively. Because of its great efficiency and purity, the current study can provide a dependable procedure for extracting Ni and V from solid waste.     

Pomegranate fallen leaves as a source of natural dye for mordant-free dyeing of wool

The application of metal mordants is usually necessary in dyeing of wool with natural dyes to improve the dye exhaustion and fastness properties. The majority of metal salts generally used as mordants are considered as toxic and it is important to find replacements for them. Plant sources with high content of tannins are good candidates as bio-mordant or colourant to overcome this drawback. In this study, the waste fallen leaves of pomegranate tree were used as a source of natural dye for the eco-friendly dyeing of wool fabric without the use of metal mordants. The dyeing process variables including dye concentration, dyebath pH, and temperature were optimised using response surface methodology to obtain the highest colour strength. The colour strength was increased by increasing the natural dye powder up to 100%owf while the optimum pH and dyebath temperature were 4 and 100°C, respectively. The sample dyed under the optimal condition exhibited good fastness properties against washing and light. This study approved the potential of Punica granatum fallen leaves for the dyeing of wool without any mordant, while high fastness properties were obtained.     

Innovative Diagnostic Peptide-Based Technologies for Cancer Diagnosis: Focus on EGFR-Targeting Peptides

Active targeting using biological ligands has emerged as a novel strategy for the targeted delivery of diagnostic agents to tumor cells. Conjugating functional targeting moieties with diagnostic probes can increase their accumulation in tumor cells and tissues, enhancing signal detection and, thus, the sensitivity of diagnosis. Due to their small size, ease of chemical synthesis and site-specific modification, high tissue penetration, low immunogenicity, rapid blood clearance, low cost, and biosafety, peptides offer several advantages over antibodies and proteins in diagnostic applications. Epidermal growth factor receptor (EGFR) is one of the most promising cancer biomarkers for actively targeting diagnostic and therapeutic agents to tumor cells due to its active involvement and overexpression in various cancers. Several peptides for EGFR-targeting have been identified in the last decades, which have been obtained by multiple means including derivation from natural proteins, phage display screening, positional scanning synthetic combinatorial library, and in silico screening. Many studies have used these peptides as a targeting moiety for diagnosing different cancers in vitro, in vivo, and in clinical trials. This review summarizes the progress of EGFR-targeting peptide-based assays in the molecular diagnosis of cancer.     

Investigating the effect of zirconium-based and titanium-based metal–organic frameworks nanoparticles on the performance of polysulfone hollow fiber mixed matrix membrane for dialysis application

This study aims to investigate polysulfone (PSF) mixed matrix membranes (MMMs) properties containing zirconium-based and titanium-based metal–organic frameworks (MOFs). for hemodialysis application. The nanoparticles were synthesized, and the membranes were produced by the phase inversion method. Membrane characterization conducted by attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), field emission Scanning electron microscope (FE-SEM), energy-dispersive x-ray analysis (EDX), transmission electron microscopy (TEM), x-ray diffraction (XRD), and atomic force microscopy (AFM) confirmed the presence of MOF nanoparticles. Also, the evaluation of the specific surface area of nanoparticles was done by BET. The water contact angle reduced from 64.4° to 51.2°, indicating the hydrophilicity improvement, enhancing the pure water flux from 46.8 L/m²h for the pristine membrane to 76.7 L/m2h for the pristine membrane M₄. The total fouling resistance decreased from 30% to 21%, and the bovine serum albumin (BSA) adsorption of modified membranes was lower than that of the pristine membrane. Urea and creatinine were cleared significantly for modified ones, up to 82.6% and 72.1%, respectively, and all membranes showed BSA retention of more than 93%. A comparison between MMMs that contained UIO-66-NH₂ and MIL-125-NH₂ showed that the former had a better effect on the performance. M₄ had better results, indicating high water flux, the lowest fouling resistance, high porosity, lower BSA adsorption, proper clearance for urea and creatinine, and 94.2% BSA retention.     

Application of genetic algorithms in design and optimisation of multi‐stream plate–fin heat exchangers

This paper introduces two new approaches in the thermo‐hydraulic design of multi‐stream heat exchangers (MSHEs). In both approaches, geometrical aspects of the MSHE (e.g. exchanger dimensions, fin type, etc.) are optimised with a genetic algorithm (GA) using the Total Annual Cost (TAC) as an objective function. The first approach is capable of utilising the maximum allowable stream pressure drops and can result in minimal surface area requirements. In the second approach, all of the pressure drop values are considered as design variables and are therefore subject to optimisation. These approaches have been applied to two case studies taken from literature, and the results are compared to those arising from a currently used design method. In the first case study, application of the new approaches resulted in a smaller TAC than the current approach by 5.77% and 31.86%, respectively, and improvement in the second case was estimated to be 5% and 21.46%, correspondingly. The effect of different fins on an MSHE's TAC is discussed through application of GAs to the current approach. It is shown that correct selection of fin types reduces the TAC of the two case studies by 21.75% and 8.7%, respectively. © 2012 Canadian Society for Chemical Engineering     

Genetic Polymorphisms in the APOA1 Gene and their Relationship with Serum HDL Cholesterol Levels

Low high density lipoprotein cholesterol (HDL-C) is a known risk factor of coronary artery disease. Apolipoprotein A1 (APOA1) is the most abundant component of HDL-C. This study aimed at identifying sequence variations (rare and common) in the APOA1 gene and its association with serum HDL-C levels. This study was conducted from April 2012 to February 2013 on 79 Tehranians (participants of Tehran Lipid and Glucose Study) with extremely low HDL-C (within the 5th percentile) and 63 individuals with extremely high HDL-C (within the 95th percentile) levels. After DNA amplification by PCR, DNA sequencing of all three exons and 700 bps of promoter region of the APOA1 gene was performed. Sequence results were analyzed and interpreted using the appropriate software and variants were identified. After sequencing 42 common and rare variants were identified, 11 of which were known variants and the others had been unreported so far. Of the exonic variants, 11 were missense, 6 were synonymous and 1 was nonsense. There was a significant association between serum HDL-C and variant of rs2070665 as well as variants Chr.11:116707788, Chr.11:116708059, Chr.11:116708036, Chr.11:116707729, rs201148448, Chr.11:116707018, Chr.11:116707801, Chr.11:116708530, Chr.11:116708088, rs121912724 and Chr.11:116706966 (p < 0.001). Variants Chr.11:116707018, rs121912724 and 2070665 were independent predictors of the HDL-C level (p < 0.001). SNP Chr.11:116707018 was the strongest predictor of the HDL-C level (OR 7.527, p < 0.001). This study identified 42 variants in APOA1 gene, 31 of which were new variants. Three variants of rs2070665, rs121912724 and Chr.11:116707018 could predict the HDL-C level independently. Variant rs2070665 was protective against low-HDL-C levels while variants rs121912724 and Chr.11:116707018 were risk factors for that in our population.     

Protein encapsulated in electrospun nanofibrous scaffolds for tissue engineering applications

The main purpose of tissue engineering is the preparation of fibrous scaffolds with similar structural and biochemical cues to the extracellular matrix in order to provide a substrate to support the cells. Controlled release of bioactive agents such as growth factors from the fibrous scaffolds improves cell behavior on the scaffolds and accelerates tissue regeneration. In this study, nanofibrous scaffolds were fabricated from biocompatible and biodegradable poly(lactic‐co‐glycolic acid) through the electrospinning technique. Nanofibers with a core–sheath structure encapsulating bovine serum albumin (BSA) as a model protein for hydrophilic bioactive agents were prepared through emulsion electrospinning. The morphology of the nanofibers was evaluated by field‐emission scanning electron microscopy and the core–sheath structure of the emulsion electrospun nanofibers was observed by transmission electron microscopy. The results of the mechanical properties and X‐ray diffraction are reported. The scaffolds demonstrated a sustained release profile of BSA. Biocompatibility of the scaffolds was evaluated using the MTT (3(4,5‐ dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide) assay for NIH‐3T3 fibroblast cells. The results indicated desirable biocompatibility of the scaffolds with the capability of encapsulation and controlled release of the protein, which can serve as tissue engineering scaffolds. © 2013 Society of Chemical Industry     

Polyurethane Foam Wastes Recycling under Microwave Irradiation

Microwave-assisted (MW-assisted) glycolysis of waste-flexible polyurethane (PU) foams using pentaerythritol in combination with glycerin and sodium hydroxide as a PU bond degradation reagent is reported. Split phases appeared after complete foam digestion. The upper phase contained recycled polyol, and the lower phase was a brown liquid with highly functionalized oligomers, amines and unreacted degradation reagents and showed potential for application in rigid polyurethane foam formulation. Our studies showed the dependence of recovered polyol assay to the additional MW irradiation and amine-free polyol were achieved in high yields and purities.