Concentration and distribution of heavy metals in urban airborne particulate matter in Frankfurt am Main, Germany

Heavy metal concentrations were measured in airborne dust collected at three sites with different traffic densities from August 2001 to July 2002 in the Frankfurt am Main area. Bulk samples of particulate matter (PM) with an aerodynamic equivalent diameter of <22 microm were collected on cellulose nitrate filters using air filtration devices. Fractionated samples of PM with an aerodynamic equivalent diameter of <10 microm were collected using an eight-stage Andersen impactor. Pb, Cd, Mn, Ni, Zn, V, As, Sb, Cu, Cr, Co, and Ce were determined by inductively coupled plasma sector field mass spectrometry, Pt and Rh were determined by adsorptive voltammetry, and Pd was determined by total reflection X-ray fluorescence analysis. The results show that the highest airborne heavy metal concentrations occurred at the main street with a large volume of traffic. With the exception of Co, V, Ce, and Mn, the heavy metals had an elevated enrichment factor compared to their concentrations in the continental crust. The main street site was especially contaminated with Sb, Zn, Cu, V, and Ni. Motor vehicles are the likely source of emissions. With the exception of Cr, Cu, and Zn, most of the airborne heavy metal concentrations determined for impactor samples deviate slightly from the results for total airborne dust. Heavy metal particle size distributions can be divided into three groups. For metals such as As, Cd, Pb, and V, the main fraction can be found in fine particles with a diameter of <2.1 microm, whereas Ce, Cr, Co, and Ni occur mainly in coarse particles with a diameter of >2.1 microm. Cu, Mn, Sb, Zn, Pt, Pd, and Rh occur in high concentrations in the medium range of the impactor stages (particle diameters of 1.1-4.7 microm). Metal concentrations in fine dust particles are needed to assess the human health risks of their inhalation.     

Utilization of Microvisco-Amylograph to Study Flour,Dough, and Bread Qualities of Hydrocolloid/Flour Blends

Changes in functionality of wheat flour blended with hydrocolloids (alginate, locust bean gum, guar gum, and xanthan) were investigated. Microvisco-amylograph and flour quality analyses were conducted and showed significant (p < 0.05) differences among samples. Correlation of microvisco-amylograph values with other parameters showed that microvisco-amylograph parameters (final viscosity, setback, breakdown, etc.) showed significant (p < 0.05) correlation with other parameters. Microvisco-amylograph breakdown was significantly (p < 0.05) and positively correlated with dough strength and loaf volume. Microvisco-amylograph end of cooling, final viscosity, setback, and breakdown were identified as valuable for determination of flour, dough, and bread qualities as impacted by addition of hydrocolloids.     

Adsorption and surface complexation study of L-DOPA on Rutile (α-TiO₂) in NaCl solutions

Dihydroxyphenylalanine (DOPA) and similar molecules are of considerable interest in studies of bioadhesion to minerals, solar cells involving titanium dioxide, and biomedical imaging. However, the extent and mechanisms of DOPA adsorption on oxides in salt solutions are unknown. We report measurements of DOPA adsorption on well-characterized rutile (α-TiO?) particles over a range of pH, ionic strength, and surface coverage as well as a surface complexation model analysis establishing the stoichiometry, model surface speciation, and thermodynamic equilibrium constants, which permits predictions in more complex systems. DOPA forms two surface species on rutile, the proportions of which vary strongly with pH but weakly with ionic strength and surface loading. At pH < 4.5 a species involving four attachment points ("lying down") is important, whereas at pH > 4.5 a species involving only two attachment points via the phenolic oxygens ("standing up") predominates. Based on evidence of strong attachment of DOPA to titanium dioxide from single molecule AFM (Lee, H. et al., Proc. Natl. Acad. Sci.2006, 103, 12999-12003) and studies of catechol adsorption, one or more of the DOPA attachments for each species is inner-sphere, the others are likely to be H-bonds.     

Short communication: effects of supplementation with pomegranate seed pulp on concentrations of conjugated linoleic acid and punicic acid in goat milk

The effects of feeding pomegranate seed pulp (PSP) on milk yield, milk composition, fatty acid profiles of milk fat, and blood metabolites were examined in this study. During a pretrial period, 27 multiparous southern Khorasan (Iran) cross-bred goats were fed a similar diet and dry matter intake, milk yield, and milk composition were recorded. After adaptation and based on pretrial records, the goats were randomly assigned to 1 of 3 experimental diets and were housed in individual stalls. Experimental diets included 0, 6, or 12% of PSP (dry matter basis) and were fed as total mixed rations ad libitum for a 45-d period. Diets were formulated to be isonitrogenous and isocaloric. Supplementation of PSP did not affect dry matter intake or average daily gain of goats. Milk yield was not affected by inclusion of PSP in the diet. Milk fat concentration of goats fed diets with 6 and 12% PSP increased, but milk fat yield, milk protein concentration, and milk solids-not-fat concentration of goats were not affected by diets. Feeding PSP did not affect blood glucose, cholesterol, urea N, triglyceride, or lipoproteins. Feeding goats a diet containing 12% PSP modified the milk fatty acid profile, including conjugated linoleic, punicic, and vaccenic acids.     

Concentration and distribution of platinum group elements (Pt, Pd, Rh) in airborne particulate matter in Frankfurt am Main, Germany

The concentrations and distribution of platinum group elements (Pt, Pd, Rh) in airborne particulate matter were studied in a period of one year from August 2001 to July 2002 in urban and in nonurban areas. Airborne dust samples were collected as a total amount (particles with an aerodynamic diameter <22 microm) and classified using an eight-stage Andersen impactor (<10 microm) at three locations with different traffic density roads in the Frankfurt am Main and nonurban areas. Sampling at the three locations was performed simultaneously for total airborne dust and fractionated airborne dust. Pd was determined by total reflection X-ray fluorescence after Hg coprecipitation. Pt and Rh were analyzed by adsorptive striping voltammetry after HPA digestion. The results show that the PGE concentrations in airborne samples depend on the traffic density. The highest PGE concentrations in air were found in the vicinity of major roads with heavy traffic, and the lowest ones were found in the nonurban area. The presence of PGE at the sampling station relatively free of traffic in a nonurban area hints to a transport of some of the emitted PGE from the city to this station by wind. At all three sampling locations, a heterogeneous distribution of the Pd, Pt, and Rh concentrations during the sampling year can be observed. The sum of PGE concentrations in total airborne dust is comparable with the sum of impactor samples. However, the concentration of Pt and Rh in total airborne dust (<22 microm) is on average higher than in impactor samples (<10 microm). On the contrary, Pd concentration is higher in impactor samples in most cases. The airborne PGE distribution is dominated by Pt, followed by Pd and Rh. The impactor samples are dominated by Pd, followed by Pt and Rh. This fact indicates that palladium occurs mainly in relatively fine airborne particles. The main fraction of PGE is found on average in particle sizes between 1.1 and 4.7 microm. Knowledge of the size distribution of particles containing PGE is important with respect to risk assessment of human inhalation.     

Performance Analysis and Optimization Based on Adaptive Modulation and Chaotic Interleaving for Helicopter-Satellite Communications

Overcoming periodic blockage of the received signal and the carrier frequency fluctuations caused by rotor blades and Doppler shift, respectively, are considered the most challenging issues in helicopter-satellite communication systems. In this study, we propose an automatic frequency control method based on an adaptive modulation scheme. We employ a hybrid modulation not only depending on quadrature phase shift keying, but also based on binary phase shift keying for accurate cancellation of periodic blockage. On the other hand, we apply a chaotic interleaving scheme with a hybrid modulation scheme in order to achieve a better Bit Error Rate (BER) performance in LOS and NLOS environments. Finally, we validate the mathematical analysis of the proposed scheme through simulations. We evaluated the performance of the proposed scheme and performed a comparison with conventional schemes. Our results show that the proposed scheme is significantly capable of reducing the acquisition time and working with various velocities of helicopter blades in addition to providing a better BER performance in shadow fading environments.     

Application of Fractal Theory for Prediction of Shrinkage of Dried Kiwifruit Using Artificial Neural Network and Genetic Algorithm

In current research, fractal theory has been applied for estimation of shrinkage of osmotically dehydrated and air-dried kiwifruit using a combination of neural network and genetic algorithm. Kiwifruits were dehydrated at different conditions and digital images of final dried products were taken. Kiwifruit-background interface lines were detected using a threshold combined with an edge detection approach and their corresponding fractal dimensions were calculated based on a box counting method. A neural network was constructed using fractal dimension and moisture content as inputs to predict shrinkage of dried kiwifruit and a genetic algorithm was applied for optimization of the neural network's parameters. The results indicated good accuracy of optimal model (correlation coefficient of 0.95) and high potential application of fractal theory and described intelligent model for shrinkage estimation of dried kiwifruit.     

Effect of Fiber Acid Treatment on the Dynamic Mechanical Properties of Unsaturated Polyester/Carbon Fiber Unidirectional Composites

In this study, the surface modification of carbon fiber by sulfuric acid is investigated. Atomic Force Microscopy was employed to capture the corresponding changes in the surface roughness of the carbon fiber. Moreover, using treated and untreated fibers, unsaturated polyester unidirectional composite rods were prepared and their flexural properties were determined by three-point bending and dynamic mechanical thermal analysis.

The results indicated that the carbon fiber surface roughness increases in all samples. It is also found that treating the fiber decreases the magnitude of loss modulus. Besides, the flexural strength of composites made of the treated carbon fiber significantly increased.