Synthesis and properties of polytriazoleimide containing anthracene,pyridine and 1, 2, 3‐triazole groups and their nanocomposites with titanium dioxide

A novel anthracene, pyridine and 1, 2, 3‐triazole containing diamine was synthesized by copper catalyst 1, 3‐dipolar cycloaddition of azides and alkynes groups (Click reaction). A series of polytriazoleimide (PTAI) nanocomposites were successfully prepared by condensation polymerization between the synthesized diamine monomer and commercially available pyromellitic dianhydride with different weight percentage of titanium dioxide (TiO₂). The structure of the monomer and polymer were confirmed by the fourier transform infrared and nuclear magnetic resonance spectroscopy. The synthesized PTAI is readily soluble in common polar solvents. The PTAIs naocomposites exhibited high thermal stability, the temperature corresponding to a 5% weight loss in the range of 495°C–555°C, excellent flame retardancy (char yield were found to be in the range of 48.1–66.4) and high glass transition temperature (T_g) at (267°C–294°C). Furthermore incorporation of TiO₂ into the PTAI matrix significantly improve the dielectric constant (2.70–4.75 at 1MHz) and dielectric loss (0.06–0.46 at 1 MHz). POLYM. ENG. SCI., 59:129–138, 2019. © 2018 Society of Plastics Engineers     

Effects of Blueberry (Vaccinium corymbosum) Juice on Lipid Oxidation During Spray Drying of Microencapsulated Menhaden Oil

This study investigated the effect of blueberry juice on menhaden oil lipid oxidation during microencapsulation. Oil in water emulsions containing menhaden oil with 0, 5, or 10% blueberry juice were spray dried to produce control-M, 5% BJ-M, and 10% BJ-M microencapsulated powders, respectively. All microencapsulated powders had similar encapsulation efficiencies with low surface oil content. Peroxide value (meq/kg of oil) was 4.50, 4.31, and 3.38 for control-M, 5% BJ-M and 10% BJ-M, respectively. Ten percent BJ-M had lower (P < 0.05) anisidine value, and totox values than 5% BJ-M and control-M. This indicated that 10% blueberry juice reduced lipid oxidation in menhaden oil during microencapsulation to a greater extent than the other formulations.     

Lubrication of a narrow porous journal bearing with a couple stress fluid

This paper describes a theoretical investigation of the rheological effects of couple stress fluids on the performance of narrow porous journal bearings. A most general modified Reynolds equation is derived for narrow porous journal bearings using the Stokes constitutive equations for couple stress fluids. The fluid in the film region and in the porous region has been modelled as a couple stress fluid. The analysis takes into account velocity slip at the porous interface using the Beavers‐Joseph criterion. A closed‐form expression for field pressure is obtained for narrow journal bearings. Eigen‐type expressions for field variations are obtained. The dimensionless load‐carrying capacity, attitude angle, and coefficient of friction are presented for different operating parameters. It is observed that narrow porous journal bearings with couple stress fluids as lubricant show a significant increase in load‐carrying capacity with reduced coefficient of friction as compared to the Newtonian case. The present study predicts the effects of the percolation of polar additives (microstructures) into the porous matrix on the bearing performance.     

Visual object tracking via adaptive deep feature matching and overlap maximization

Pattern Analysis and Applications - Visual object tracking using deep features has achieved great success, particularly when object appearances change in the presence of illumination variation,...     

Analysis of variations in porosity of metal crosslinked collagen matrix

The fundamental knowledge of the porous nature of crosslinked collagen matrix such as tanned leather is an aid to design appropriate chemicals for leather making. It would also help to target a particular area of matrix to improve its uniformity and other functional properties. The purpose of this study is to analyze the variations in pore sizes of chromium crosslinked collagen matrix, chrome tanned leather, from different animal species and different areas of the same species. In this study, chrome tanned leather from goat and sheep were investigated for surface area, pore size, and distribution. Thermoporometry results show that average pore radius of goat leather is around 2–30 nm and that of sheep is 2–20 nm. Nitrogen adsorption result shows that average surface area of goat (8.24 m²/g) leather is higher than sheep (6.73 m²/g), but the average pore diameter of goat (289 nm) is smaller than sheep (385 nm) leather. It has been found that more numbers of smaller pores are present in goat than sheep leather and all the leather samples including goat and sheep obeyed type‐III adsorption isotherm. Capillary flow porometry analysis gives the smallest, largest, and mean‐flow‐diameter of through‐pores. The average size of largest throat pore diameter of sheep (1313 nm) is smaller than that of goat (1385 nm) leather. In general, the pore volume distribution of sheep leather is higher than that of goat leather. Morphological analysis using scanning electron microscopy shows that pore mouth of goat is deeper than that of sheep. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40835.     

Formulation of epoxy–polyester powder coatings containing silver-modified nanoclays and evaluation of their antimicrobial properties

Current interest in antimicrobial coatings is driven by an urgent need for more effective strategies to control microbial infection. In this study, antimicrobial nanoclays were prepared by ion-exchange of sodium montmorillonite (MMT) with silver ions which have been previously reported to exhibit biocidal activity. The extent of ion-exchange achieved was estimated by X-ray photoelectron spectroscopy. The silver-modified nanoclay (AgMMT) fully inhibited growth of Gram-negative bacterium Escherichia coli DH5α (E. coli) over 24 h; annealing AgMMT under typical conditions used to prepare polymer composites did not reduce its antimicrobial efficacy. However, powder coatings of AgMMT dispersed in epoxy/polyester resin exhibited no antimicrobial effect on E. coli. This is believed to be caused by poor wetting of the polymer coating, which restricted the diffusion of silver ions from the coating.     

Influence of graphene oxide on thermal,electrical, and morphological properties of new achiral polyimide

In this study, a new diamine N‐[2‐(1H‐indol‐3‐yl)ethyl]‐3,5‐diaminobenzamide (IEDAB) was synthesized using tryptamine as starting material and characterized by FT‐IR, ¹H‐NMR, ¹³C‐NMR, and mass spectroscopy. Then, it was polymerized with 3,3',4,4'‐benzophenone tetracarboxylic dianhydride (BTDA) via thermal imidization to produce polyimide (PI). A series PI/GO nanocomposite films were prepared by incorporating different ratios (1, 3, and 5 wt%) of synthesized GO by solution casting method. The synthesized PI was confirmed by Ubbelohde viscometer and FT‐IR spectroscopy. SEM and Raman spectroscopy showed that GO was well dispersed in the PI matrix. XRD patterns indicated the PI and PI/GO nanocomposite films were highly amorphous in nature. The synthesized PI and their nanocomposites show high thermal stability as their T_10% weight loss are in the range of 498 to 563°C with 30.6 to 40% of char yield and the glass transition temperatures (T_g s) are in the range of 188 to 262°C. The limited oxygen index (LOI) values increased from 31.4% to 56.0% with increases of 5% GO content in the PI/GO nanocomposite. They have high dielectric constant in the range of 2.6 to 5.1 at 1 MHz and also good mechanical properties with tensile strength of 81 to 116 MPa, elongation at break 5 to 9%. POLYM. ENG. SCI., 2017. © 2017 Society of Plastics Engineers     

Polymeric Corrosion Inhibitors for Iron and Its Alloys: A Review

Several works have been reported on the corrosion inhibition of different metals in various corrosive environments. Initially attention was centered on organic compounds but later focused on green inhibitors. Green inhibitors include nontoxic, eco-friendly polymers and natural inhibitors. In recent years, there has been increased emphasis on applications of polymers, copolymers, grafted polymers, and polymer composites as green corrosion inhibitors. The prime controlling factors influencing the corrosion inhibitive performance of polymeric compounds on the corrosion of metals in various corrosive environments are discussed in this review. The superior performance of a polymeric corrosion inhibitor is due to its larger size and greater number of functional anchoring groups. Through the anchoring groups the polymers easily get adsorbed on the metal surface and cover considerably more surface than the corresponding monomers. The main factors influencing the corrosion mitigating properties of the polymers are molecular size, weight, composition, and nature of the anchoring groups. The solution pH, concentration, exposure time, and temperature also find their role in inhibition performance. In this review, we have tried to cover various types of polymeric corrosion inhibitors for iron and its alloys.