Stability under vacuum of silicon trap detectors and their use as transfer instruments in cryogenic radiometry

The stability of the responsivity of trap detectors under vacuum has been studied by means of a special chamber designed for the test of photodetectors at low pressure. The first experiments at a wavelength of 647 nm show that the responsivity variations are smaller than the uncertainties of the measurements, approximately 3 parts in 10(5), when the detector operates successively in air, under vacuum, and then again in air. Calculations based on experiments with single windowless photodiodes indicate that the change in trap responsivity that is due to vacuum effects should be smaller than 1 part in 10(5), at least in the visible part of the wavelength range. This stability makes trap detectors suitable for cryogenic radiometry when one uses transfer detectors under vacuum.     

Fast computation of the prime implicants by exact direct-cover algorithm based on the new partial ordering operation rule

In this study, a novel OFF-set based direct-cover Exact Minimization Algorithm (EMA) is proposed for single-output Boolean functions represented in a sum-of-products form. To obtain the complete set of prime implicants covering the given Target Minterm (ON-minterm), the proposed method uses OFF-cubes (OFF-minterms) expanded by this Target Minterm. The amount of temporary results produced by this method does not exceed the size of the OFF-set. In order to achieve the goal of this study, which is to make faster computations, logic operations were used instead of the standard operations. Expansion OFF-cubes, commutative absorption operations and intersection operations are realized by logic operations for fast computation. The proposed minimization method is tested on several classes of benchmarks and then compared with the ESPRESSO algorithm. The results show that the proposed algorithm obtains more accurate and faster results than ESPRESSO does.     

An assessment of total RMR classification system using unified simulation model based on artificial neural networks

Engineering design has great importance in the cost and safety of engineering structures. Rock mass rating (RMR) system has become a reliable and widespread pre-design system for its ease of use and variety in engineering applications such as tunnels, foundations, and slopes. In RMR system, six parameters are employed in classifying a rock mass: uniaxial compressive strength of intact rock material (UCS), rock quality designation (RQD), spacing of discontinuities (SD), condition of discontinuities (CD), condition of groundwater (CG), and orientation of discontinuities (OD). The ratings of the first three parameters UCS, RQD, and SD are determined via graphic readings where the last three parameters CD, CG, and OD are estimated by the tables that are composed of interval valued linguistic expressions. Because of these linguistic expresions, the estimated rating values of the last three become fuzzy especially when the related conditions are close to border of any two classes. In such cases, these fuzzy situations could lead up incorrect rock class estimations. In this study, an empirical database based on the linguistic expressions for CD, CG, and OD is developed for training Artificial Neural Network (ANN) classifiers. The results obtained from graphical readings and ANN classifiers are unified in a simulation model (USM). The data obtained from five different tunnels, which were excavated for derivation purpose, are used to evaluate classification results of conventional method and proposed model. Finally, it is noted that more accurate and realistic ratings are reached by means of proposed model.     

Pitch angle control in wind turbines above the rated wind speed by multi-layer perceptron and radial basis function neural networks

In wind energy conversion systems, one of the operational problems is the changeability and discontinuity of wind. In most cases, wind speed can fluctuate rapidly. Hence, quality of produced energy becomes an important problem in wind energy conversion plants. Several control techniques have been applied to improve the quality of power generated from wind turbines. Pitch control is the most efficient and popular power control method, especially for variable-speed wind turbines. It is a useful method for power regulation above the rated wind speed. This paper proposes an artificial neural network-based pitch angle controller for wind turbines. In the simulations, a variable-speed wind turbine is modeled, and its operation is observed by using two types of artificial neural network controllers. These are multi-layer perceptrons with back propagation learning algorithm and radial basis function network. It is shown that the power output was successfully regulated during high wind speed, and as a result overloading or outage of the wind turbine was prevented.     

Prediction of deflection of reinforced concrete shear walls

Reinforced concrete shear walls are used in tall buildings for efficiently resisting lateral loads. Due to the low tensile strength of concrete, reinforced concrete shear walls tend to behave in a nonlinear manner with a significant reduction in stiffness, even under service loads. To accurately assess the lateral deflection of shear walls, the prediction of flexural and shear stiffness of these members after cracking becomes important. In the present study, an iterative analytical procedure which considers the cracking in the reinforced concrete shear walls has been presented. The effect of concrete cracking on the stiffness and deflection of shear walls have also been investigated by the developed computer program based on the iterative procedure. In the program, the variation of the flexural stiffness of a cracked member has been evaluated by ACI and probability-based effective stiffness model. In the analysis, shear deformation which can be large and significant after development of cracks is also taken into account and the variation of shear stiffness in the cracked regions of members has been considered by using effective shear stiffness model available in the literature. Verification of the proposed procedure has been confirmed from series of reinforced concrete shear wall tests available in the literature. Comparison between the analytical and experimental results shows that the proposed analytical procedure can provide an accurate and efficient prediction of both the deflection and flexural stiffness reduction of shear walls with different height to width ratio and vertical load. The results of the analytical procedure also indicate that the percentage of shear deflection in the total deflection increases with decreasing height to width ratio of the shear wall.     

Mobile multi-view object image search

High user interaction capability of mobile devices can help improve the accuracy of mobile visual search systems. At query time, it is possible to capture multiple views of an object from different viewing angles and at different scales with the mobile device camera to obtain richer information about the object compared to a single view and hence return more accurate results. Motivated by this, we propose a new multi-view visual query model on multi-view object image databases for mobile visual search. Multi-view images of objects acquired by the mobile clients are processed and local features are sent to a server, which combines the query image representations with early/late fusion methods and returns the query results. We performed a comprehensive analysis of early and late fusion approaches using various similarity functions, on an existing single view and a new multi-view object image database. The experimental results show that multi-view search provides significantly better retrieval accuracy compared to traditional single view search.     

Contribution of laser microdissection-based technology to proteomic analysis in hepatocellular carcinoma developing on cirrhosis

Hepatocellular carcinoma (HCC) is a major cause of cancer worldwide. Proteomic studies provide opportunities to uncover targets for the diagnosis and treatment of this disease. However, in HCC developing in a setting of cirrhosis, the detection of proteome alterations may be hampered by the increased cellular heterogeneity of tissue when analysing global liver homogenates. The aim of this study was to evaluate whether the identification of proteome alterations in these HCC cases was improved when the differential protein profile between tumour and non-tumour areas of liver was determined using hepatocytes isolated by laser microdissection (LM). Differential profiles established with LM-hepatocytes and liver section homogenates using 2-DE and MS exhibited noticeable differences: 30% of the protein spots with deregulated expression in tumorous LM-samples did not display any modification in homogenates; conversely 15% of proteins altered in tumorous homogenates were not impaired in LM-hepatocytes. These alterations resulted from the presence in cirrhotic liver of fibrotic stroma which displayed a protein pattern different from that determined in LM-hepatocytes. In conclusion, our data demonstrate the interest of LM in distinguishing between fibrotic and hepatocyte proteome alterations and thus the benefit of LM to proteome studies of HCC developing in a context of cirrhosis.     

Nodal Superconvergence of SDFEM for Singularly Perturbed Problems

In this paper, we analyze the streamline diffusion finite element method for one dimensional singularly perturbed convection-diffusion-reaction problems. Local error estimates on a subdomain where the solution is smooth are established. We prove that for a special group of exact solutions, the nodal error converges at a superconvergence rate of order (ln ε ⁻¹/N)^2k (or (ln N/N)^2k ) on a Shishkin mesh. Here ε is the singular perturbation parameter and 2N denotes the number of mesh elements. Numerical results illustrating the sharpness of our theoretical findings are displayed.     

Graph-based shape indexing

Graphs have become growingly important in representing shapes in computer vision. Given a query graph, it is essential to retrieve similar database graphs efficiently from a large database. In this paper, we present a graph-based indexing technique which overcomes significant drawbacks of the previous work (Demirci et al. in Comput Vis Image Underst 110(3):312–325, 2008) using a recently developed theorem from the domain of matrix analysis. Our technique starts by representing the topological structure of a graph in a vector space. As done in the previous work, the topological structure of a graph is constructed using its Laplacian spectra. However, unlike the previous approach, which represents all sugraphs of a database graph in the vector space to account for local similarity, a database graph in the proposed framework is represented as a single vector. By performing a range search around the query, the proposed indexing technique returns a set with both partial and global similarity. Empirical evaluation of the algorithm on an extensive set of retrieval trials including a comparison with the previous approach in both 2D and 3D demonstrates the effectiveness, efficiency, and robustness of the overall approach.