Asymmetric Fission Transmission of Linear-to-Circular Polarization Converter Using Bi-layer Split Ring Structure

A circular polarizer based on bi-layer split ring structure is proposed that could achieve asymmetric fission transmission of linearly polarized wave at the dual band. Firstly, a new approach of “Fission Transmission of Electromagnetic (FTEM) waves” is introduced to understand the polarization transformation behavior for linear-to-circular polarization. The designed structure achieves broadband circularly polarized wave with an asymmetric transmission over resonance frequencies by the principle of FTEM wave. The electronics circuit of proposed structure demonstrates the transformation behavior of EM waves when the electric and magnetic coupling between the upper and lower patterned SRR is reached at the certain strength. The physics of the giant circular dichroism effect and optical activity is illustrated by the surface currents distribution on the structure. The proposed structure achieves a right-handed circularly polarized wave and left hand circularly polarized wave with high transmission at 13.94–15.70 GHz and at 16.0–17.03 GHz, respectively. The axial ratio bandwidth of 11.76 and 6.86% is obtained at the dual band. The simulated and measured results exhibit good correspondence.     

A comparative study of full‐duplex relaying schemes for low latency applications

Various sectors are likely to carry a set of emerging applications while targeting a reliable communication with low latency transmission. To address this issue, upon a spectrally‐efficient transmission, this paper investigates the performance of a 1 full‐dulpex relay system and considers for that purpose, 2 basic relaying schemes, namely, the symbol‐by‐symbol transmission, i.e., amplify‐and‐forward and the block‐by‐block transmission, i.e., selective decode‐and‐forward. The conducted analysis presents an exhaustive comparison, covering both schemes, over 2 different transmission modes, i.e., the noncombining mode where the best link, direct, or relay link is decoded and the signals combining mode, where direct and relay links are combined at the receiver side. While targeting latency purpose as a necessity, simulations show a refined results of performed comparisons and reveal that amplify‐and‐forward relaying scheme is more adapted to combining mode, whereas the selective decode‐and‐forward relaying scheme is more suitable for noncombining mode.     

Measurement of natural radioactivity and dose rate assessment of terrestrial gamma radiation in the soil of southern Punjab, Pakistan

Activity concentrations of (226)Ra, (232)Th, (40)K and (137)Cs in soil samples collected from the most populous area of southern Punjab of Pakistan have been measured by gamma-ray spectrometry. The measured activity concentrations for these radionuclides are compared with the reported data from different other countries and it is found that measured activity concentrations are comparable with the worldwide measured average values reported by the UNSCEAR. Subsequently assessed radiological effects show that the mean radium equivalent activity (Ra(eq)) is 96.7 +/- 15.2 Bq kg(-1) and air absorbed dose rate (D) is 46.1 +/- 7.3 nGy h(-1). The values of internal and external radiation hazard indices are found to be less than unity. The annual effective radiation dose is calculated to be 0.28 +/- 0.05 mSv, which is well below the limit of 1.0 mSv y(-1) recommended by the International Commission on Radiological Protection, for the general public.     

Physical and chemical modification of distillery sludge for Pb(II) biosorption

The waste distillery sludge from sugar-cane industry was pretreated physically (boiled, heated and autoclaved) as well as chemically (HCl, H(2)SO(4), H(3)PO(4), NaOH, Ca(OH)(2), Al(OH)(3), C(6)H(6), HCHO, CH(3)OH and C1(2)H(25)OSO(3)Na (sodium dodecyl sulphate (SDS)) for assessing the comparative sorption capacity of untreated and modified distillery sludge for Pb(II) biosorption from aqueous solutions. Experiments were conducted in shake flasks on a batch basis to access the effect of different experimental parameters such as pH, biosorbent dosage, biosorbent size, initial Pb(II) concentration and contact time. The uptake capacity 'q' (mg/g) of untreated and pretreated distillery sludge was in following order: NaOH (51.29+/-1.21)>HCl (49.82+/-1.22)>HCHO (49.56+/-1.14)>H(2)SO(4) (47.71+/-1.20)>HgCl(2) (45.32+/-1.06)>Ca(OH)(2) (44.01+/-1.18)>MeOH (43.73+/-1.23)>C(6)H(6) (42.72+/-1.19)>H(3)PO(4) (42.01+/-1.17)>SDS (40.87+/-1.27)>autoclaved (40.23+/-1.24)>Boiled (39.95+/-1.19)>heated (38.87+/-1.32)>Al (OH)(3) (38.30+/-1.14)>untreated (37.76+/-1.21). In further parameter studies, the optimized biosorbent size was 0.250 mm at pH 5 and best dose was 0.05 g of biosorbent. The applicability of the Langmuir and Freundlich models for sorption process was tested and best fitted model was Langmuir with the coefficient of determination (R(2)) value, 0.97, the process followed second order kinetic mechanism.     

Synthesis, conformation and biological evaluation of the enantiomers of 3-fluoro-gamma-aminobutyric acid ((R)- and (S)-3F-GABA): an analogue of the neurotransmitter GABA

Gamma-aminobutyric acid or GABA (1) is one of the major inhibitory amino acid neurotransmitters of the central nervous system. This article describes the first synthesis of both the (R)- and (S)- enantiomers of 3-fluoro-GABA (2, 3F-GABA). DFT calculations were carried out in a continuum solvent model (PCM-B3LYP) to estimate the preferred conformations of 3F-GABA in aqueous solution. NMR coupling constants were calculated for each conformer and were then used to simulate the NMR spectra to evaluate the solution conformation of 3F-GABA. A preliminary evaluation of the 3F-GABA enantiomers shows that they act similarly as agonists of cloned GABA(A) receptors; however, they behave quite differently in a whole animal (Xenopus laevis tadpole model).     

Study of the Role of the Tyrosine Kinase Receptor MerTK in the Development of Kidney Ischemia-Reperfusion Injury in RCS Rats

Renal ischaemia reperfusion (I/R) triggers a cascade of events including oxidative stress, apoptotic body and microparticle (MP) formation as well as an acute inflammatory process that may contribute to organ failure. Macrophages are recruited to phagocytose cell debris and MPs. The tyrosine kinase receptor MerTK is a major player in the phagocytosis process. Experimental models of renal I/R events are of major importance for identifying I/R key players and for elaborating novel therapeutical approaches. A major aim of our study was to investigate possible involvement of MerTK in renal I/R. We performed our study on both natural mutant rats for MerTK (referred to as RCS) and on wild type rats referred to as WT. I/R was established by of bilateral clamping of the renal pedicles for 30′ followed by three days of reperfusion. Plasma samples were analysed for creatinine, aspartate aminotransferase (ASAT), lactate dehydrogenase (LDH), kidney injury molecule -1 (KIM-1), and neutrophil gelatinase-associated lipocalin (NGAL) levels and for MPs. Kidney tissue damage and CD68-positive cell requirement were analysed by histochemistry. monocyte chemoattractant protein-1 (MCP-1), myeloperoxidase (MPO), inducible nitric oxide synthase (iNOS), and histone 3A (H3A) levels in kidney tissue lysates were analysed by western blotting. The phagocytic activity of blood-isolated monocytes collected from RCS or WT towards annexin-V positive bodies derived from cultured renal cell was assessed by fluorescence-activated single cell sorting (FACS) and confocal microscopy analyses. The renal I/R model for RCS rat described for the first time here paves the way for further investigations of MerTK-dependent events in renal tissue injury and repair mechanisms.     

Wear Behavior of Composites Based on ZA-27 Alloy Reinforced by Al<Subscript>2</Subscript>O<Subscript>3</Subscript> Particles Under Dry Sliding Condition

In present study, the effect of Al₂O₃ particle reinforcement on the sliding behavior of ZA-27 alloy composites was investigated. The composites with 3, 5, and 10 wt% of Al₂O₃ particles were produced by the compocasting procedure. Tribological properties of unreinforced alloy and composite were studied, using block-on-disk tribometer under unlubricated sliding conditions at different specific loads and sliding speeds. The worn surfaces of samples were examined by the scanning electron microscopy (SEM). The test results revealed that those composite specimens exhibited significantly lower wear rate than the ZA-27 matrix alloy specimens in all combinations of applied loads and sliding speeds. The difference in the wear resistance of composite with respect to the matrix alloy, increased with the increase of the applied load/sliding speed and Al₂O₃ particle content. The highest degree of improvement of the ZA-27 alloy tribological behavior corresponded with change of the Al₂O₃ particles content from 3 to 5 wt%. At low sliding speed, moderate lower wear rate of the composites over that of the matrix alloy was noticed. This has been attributed to micro cracking tendency of the composites. Significantly reduced wear rate, experienced by the composite over that of the matrix alloy at the higher sliding speeds and loads, could be explained due to enhanced compatibility of matrix alloy with dispersoid phase and greater thermal stability of the composite in view of the presence of the dispersoid. Level of wear rate of tested ZA-27/Al₂O₃ samples pointed to the process of mild wear, which was primarily controlled by the formation and destruction of mechanical mixed layers (MMLs).