Correction of pressure drop in a heavily loaded hybrid bearing when starting by using a constant flow lubrication system- Application to a rotary cement mill

We analyzed a lubricated journal plain bearing supporting heavy loaded rotary mill. During start-up operating, after the shaft is lifted by high external pressure lubricant, the speed of the shaft grows from 0 to the operating hydrodynamic speed when, suddenly after the first thirty seconds of shaft rotation, the pressure drops in one recess causing excessive damage to the pad bearing interface. The aim was to understand and provide some answers to the pressure drop in order to give an appropriate correction. Misalignment between the shaft and bearing surfaces was considered and analyzed in first part of the study. According to the obtained results the proposed correction is to use a suitable constant flow lubrication system which avoids the pressure to drop in recesses. A real application was made on a partial pad bearing supporting a heavy rotary cement mill localized at the cement plant of Chlef in Algeria.

     

Aerobic Training in Young Men Increases the Transfer of Cholesterol to High Density Lipoprotein In Vitro: Impact of High Density Lipoprotein Size

Exercise training not only improves the plasma lipid profile but also reduces risk of developing coronary heart disease. We investigate whether plasma lipids and high density lipoprotein (HDL) metabolism are affected by aerobic training and whether the high-density lipoprotein cholesterol (HDL-C) levels at baseline influence exercise-induced changes in HDL. Seventy-one male sedentary volunteers were evaluated and allocated in two subgroups, according to the HLD-C levels (< or >40 mg/dL). Participants underwent an 18-week aerobic training period. Blood was sampled before and after training for biochemical analysis. Plasma lipids, apolipoproteins, HDL diameter, and VO₂ peak were determined. Lipid transfers to HDL were determined in vitro by incubating plasma samples with a donor lipid artificial nanoemulsion. After the 18-week period of aerobic training, the VO₂ peak increased, while the mean body mass index (BMI) decreased. HDL-C concentration was higher after the training period, but low-density lipoprotein cholesterol (LDL-C) and non-HDL-C did not change. The transfer of esterified cholesterol and phospholipids was greater after exercise training, but the triacylglycerol and unesterified cholesterol transfers were unchanged. The HDL particle diameter increased after aerobic training in all participants. When the participants were separated in low-HDL and normal-HDL groups, the postaerobic exercise increment in HDL-C was higher in the low-HDL group, while the transfer of esterified cholesterol was lower. In conclusion, aerobic exercise training increases the lipid transfers to HDL, as measured by an in vitro method, which possibly contributes to the classical elevation of the HDL-C associated with training.     

Nanocomposites of ultrahigh molar mass polyethylene and modified carbon nanotubes

In this work, the use of a laboratory twin-screw extruder was evaluated to process ultrahigh molar mass polyethylene and composites with carbon nanotubes (CNTs). Commercial polymer samples with lubricant (1%) and different percentages (0.01%, 0.05%, and 0.1%) of pure, oxidized, and chemically surface treated multi-walled carbon nanotubes (MWCNTs) were evaluated. The results showed that polymer melting and crystallization temperatures were not affected by CNTs, although an increase in the degree of crystallinity in all nanocomposites was observed along with a decrease in crystal size. Therefore, CNTs behaved as nucleating agents. All ultrahigh molar mass polyethylene (UHMWPE)/CNT samples showed increased initial degradation temperature, although this was not very great when introducing acetylated and stearic acid modified CNTs. Both oxidized CNTs and stearic acid CNTs did not markedly improve the composites' mechanical properties. Therefore, the nanocomposites containing pure CNTs and most of those with acetylated CNTs resulted in higher reinforcement for UHMWPE. The addition of the lubricant allowed the polymer matrix to be processed in the extruder, whereas the increase in CNT content in UHMWPE improved the stiffness of the material. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47459     

Synthesis and Characterization of Hetero-metallic Oxides-Reduced Graphene Oxide Nanocomposites for Photocatalytic Applications

A new AgO.CuO.WO₃/rGO nanocomposite was designed for the investigation of the degradation ability of the hybrid material under visible light irradiation. The AgO, CuO, WO₃ NPs, and AgO.CuO.WO₃ hetero-metallic oxides were fabricated via the chemical co-precipitation method. The crystallite sizes and phase analyses were investigated by recording X-ray diffraction patterns. The crystallite sizes of three metal oxides in the AgO.CuO.WO₃ hetero metal oxide were 16.7, 15.9, and 16.9 nm, respectively. The FESEM images at various magnifications were probed to study the morphology of synthesized materials. The micrographs of hetero-metallic oxides AgO.CuO.WO₃ exposed that three metal oxides merged like small particles and gives a large bulbous appearance. EDX analyses confirmed the formation of required materials with high purity. FTIR data was in agreement with the literature which facilitated to ensure the purity of synthesized samples. The optical bandgap energy was calculated via the Tauc plot indicating that the blend of three metal oxides generated a new energy level in the electronic structure is suitable for photocatalysis in the presence of visible light. The bandgap energy of hetero metallic oxides was 1.25 eV which is less than individual metal oxides signifying the tuning of the bandgap. The incorporation of rGO in AgO.CuO.WO₃ hetero-metallic oxides gives a new photocatalyst for optimum photodegradation of methylene blue in minimum time. The percentage degradation via AgO.CuO.WO₃ was 87.20% in 70 min while the percentage degradation via AgO.CuO.WO₃/rGO recorded by photocatalytic experiment was 95% in 40 min. The photocatalysis data revealed that AgO.CuO.WO₃ hetero-metallic oxides-rGO nanocomposite ensured a strong potential to uptake organic dyes from water by promoting redox reactions during photocatalysis in the minimum time limit.     

A Reliable Stochastic Numerical Analysis for Typhoid Fever Incorporating With Protection Against Infection

In this paper, a reliable stochastic numerical analysis for typhoid fever incorporating with protection against infection has been considered. We have compared the solutions of stochastic and deterministic typhoid fever model. It has been shown that the stochastic typhoid fever model is more realistic as compared to the deterministic typhoid fever model. The effect of threshold number T* hold in stochastic typhoid fever model. The proposed framework of the stochastic non-standard finite difference scheme (SNSFD) preserves all dynamical properties like positivity, bounded-ness and dynamical consistency defined by Mickens, R. E. The stochastic numerical simulation of the model showed that increase in protection leads to low disease prevalence in a population.     

Ordinary Gasoline Emissions Induce a Toxic Response in Bronchial Cells Grown at Air-Liquid Interface

Gasoline engine emissions have been classified as possibly carcinogenic to humans and represent a significant health risk. In this study, we used MucilAir™, a three-dimensional (3D) model of the human airway, and BEAS-2B, cells originating from the human bronchial epithelium, grown at the air-liquid interface to assess the toxicity of ordinary gasoline exhaust produced by a direct injection spark ignition engine. The transepithelial electrical resistance (TEER), production of mucin, and lactate dehydrogenase (LDH) and adenylate kinase (AK) activities were analyzed after one day and five days of exposure. The induction of double-stranded DNA breaks was measured by the detection of histone H2AX phosphorylation. Next-generation sequencing was used to analyze the modulation of expression of the relevant 370 genes. The exposure to gasoline emissions affected the integrity, as well as LDH and AK leakage in the 3D model, particularly after longer exposure periods. Mucin production was mostly decreased with the exception of longer BEAS-2B treatment, for which a significant increase was detected. DNA damage was detected after five days of exposure in the 3D model, but not in BEAS-2B cells. The expression of CYP1A1 and GSTA3 was modulated in MucilAir™ tissues after 5 days of treatment. In BEAS-2B cells, the expression of 39 mRNAs was affected after short exposure, most of them were upregulated. The five days of exposure modulated the expression of 11 genes in this cell line. In conclusion, the ordinary gasoline emissions induced a toxic response in MucilAir™. In BEAS-2B cells, the biological response was less pronounced, mostly limited to gene expression changes.     

Electronic,Magnetic, Electric and Magnetocaloric Properties of the Multiferroic Orthorhombic YMnO3

Journal of Superconductivity and Novel Magnetism - Multiferroic oxide materials have attracted much intention in recent years due to their application in different fields such as magnetic...     

Investigation of charge transport mechanism in semiconducting La<Subscript>0.5</Subscript>Ca<Subscript>0.5</Subscript>Mn<Subscript>0.5</Subscript>Fe<Subscript>0.5</Subscript>O<Subscript>3</Subscript> manganite prepared by sol–gel method

Here in, we report the charge transport mechanism in semiconducting La_0.5Ca_0.5Mn_0.5Fe_0.5O₃ (LCMFO) polycrystalline material synthesized via sol–gel auto combustion route. X-ray diffraction (XRD) analysis confirmed the orthorhombic phase of the prepared material. Temperature dependent resistivity and impedance spectroscopy measurements have been carried out to probe the dielectric and electrical conduction mechanism which revealed a change of Mott variable range to the small polaronic hopping conduction mechanism around 303 K. The complex impedance and modulus spectra undoubtedly showed the contribution of both grain and grain boundary effect on the conduction properties of LCMFO. An equivalent circuit [(R_gbQ_gb) (R_gQ_g)] model has been used to address the electrical parameters associated with the different phases (grains and grain boundaries) having different relaxation times. The values of resistances of two phases obtained after fitting the equivalent circuit in the nyquist plot have been analyzed which confirmed the change of conduction mechanism around 303 K. The resultant change in conduction mechanism is also supported by the conductivity plots.