Evaluation of chitosan tripolyphosphate gel beads as bioadsorbents for iron in aqueous solution and in human blood in vitro

Nonimprinted and Fe³⁺ imprinted chitosan tripolyphosphate gel beads were prepared via physical gel formation. A method based on in situ crosslinking using ethylene glycol diglycidyl ether was developed to imprint the chitosan tripolyphosphate gels with Fe³⁺ ion without deteriorating the gel beads. The beads were characterized by FTIR, SEM, XRD, and DSC with respect to the chemical structure, surface morphology, crystallinity, and thermal behavior. Swelling kinetics and Fe³⁺ ion adsorption behavior from aqueous solution were studied. The Fe³⁺ imprinted and in situ crosslinked beads proved to be durable and effective adsorbents for Fe³⁺ in solution. The bead prepared by in situ crosslinking and in the presence of 10 mM template ion had an equilibrium iron adsorption capacity of 53.9 mg/g after 3-hour contact with 5 mM Fe³⁺ solution. The pros and cons of the beads as biomedical iron adsorbents were tested by evaluating their serum iron removal capacities from human blood. The preliminary tests carried out showed that Fe³⁺ imprinted beads were more effective in decreasing serum iron in human blood when compared to the nonimprinted beads. The decrease in serum iron level accompanied a parallel decrease in the hemoglobin level. The calcium level was also affected upon contact with the beads. The Fe³⁺ imprinted beads were less effective than the nonimprinted ones in decreasing the calcium level indicating selectivity towards iron containing species. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Edible Coating Effects on Fried Potato Balls

The effects of various treatments and frying times on some physical, chemical, and sensorial properties of potato balls coated with chickpea and wheat flour were studied. Potato balls were pre-dusted with chickpea flour (CF) or wheat flour (WF) as an initial coating which was followed by dipping into 0.1% xanthum gum solution as the second coating. The last coating was breading with 1:3 CF/WF, 1:1 CF/WF, and 3:1 CF/WF mixtures. Coated potato balls were fried at 185 °C for 5, 7, and 9 min. The pre-dusting materials, particularly the effect of CF, enhanced yield values and sensorial properties as well as increased adhesion degree as it decreased frying loss. Although, the breading materials raised the yield values compared to the control, the yield and moisture content values decreased with increasing frying time. Frying loss, fat absorption, penetrometer values, and texture values also increased. Results revealed that CF is suitable as a pre-dusting material, and 7 min was the more efficient frying time for coated potato balls.     

A sandwich-type DNA array platform for detection of GM targets in multiplex assay

Over the last decade, array detection has been developed to qualitatively assess the presence of genetically modified organisms (GMOs). To date, DNA array systems have the highest capabilities as a result of GMOs analysis. We describe the construction of an array platform in the sandwich hybridization format for the detection of transgenic promoter of Cauliflower mosaic virus (CaMV; p35S). Sequence-specific signal development has been achieved by a sandwich complex composed of a surface immobilized capture probe and a fluorescein-tagged signal probe, which are partially complementary to the p35S oligonucleotide. We used poly-l-lysine-coated glass slides as support material, on which capture probes were immobilized by a heterobifunctional cross-linker. The comparative results of optimization studies including cross-linker types probe concentrations and hybridization conditions (sequence, temperature and duration) were reported. An optimum hybridization signal was obtained with a 32.5 ? cross-linker, 10???M capture and 20???M signal probe concentrations, respectively. A relatively short hybridization time (2.5?h) provided reproducible array signals. No significant effect of hybridization sequence on the fluorescence intensity was observed. The described platform can specifically detect label-free transgenic sequences with a target of 0.01???M concentration, while the optimized system exhibits great potential for the application of different GMO target sequences (p35S, tNOS, bar and cry) to multiplex array formats.     

Evaluation of surface topography changes in three NiTi file systems using rotary and reciprocal motion: An atomic force microscopy study

Aim: To evaluate the surface topography changes in three nickel‐titanium (NiTi) file systems using either rotary or reciprocal motion using atomic force microscopy (AFM), and to determine the effect of scanning area on the AFM results in this study. Methodology: Five points on a F2 Protaper file, R25 Reciproc file, and a Primary file from WaveOne systems were scanned preoperatively in 1 × 1 and 5 × 5 µm² with an AFM device that can scan an intact (not sectioned) file. One standardized resin block was used for each instrument, according to the manufacturer's recommendations. Points were re‐scanned postoperatively using the same AFM and settings. Root‐mean‐square (RMS) and roughness average (Ra) values were obtained. The preoperative and postoperative surface topographies were compared separately in terms of RMS and Ra values. The surface topography change scores were analyzed using Kruskal–Wallis and Mann–Whitney U tests using a 0.10 significance level. Results: There were no significant differences preoperatively among the NiTi file systems in 1 × 1 or 5 × 5 µm² areas. Postoperatively, the WaveOne Primary had more surface irregularities (significant for 5 × 5 µm² scan in Ra evaluation). Conclusions: Three‐dimensional AFM images of instrument surfaces showed topographic irregularities preoperatively and postoperatively. AFM results differ depending on the scanning area and file used. Microsc. Res. Tech. 77:177–182, 2014. © 2013 Wiley Periodicals, Inc.     

Production of activated carbon from olive bagasse by physical activation

Activated carbons were produced from olive bagasse and their characteristics were investigated. Olive bagasse was first carbonized at 500 °C in N₂ atmosphere. Then, the obtained chars were activated with steam. The effects of activation temperature and duration were examined. The resultant activated carbons were characterized by measuring their porosities and pore size distributions. The activated carbons produced had the BET surface areas ranging from 523 to 1106 m²/g. The total pore volume was increased from 0.2981 to 0.6067 cm³/g. Adsorption capacity was demonstrated by the iodine numbers. The surface chemical characteristics of activated carbons were determined by FTIR spectroscopic method and Boehm's titration method. The microstructure of the activated carbons prepared was examined by scanning electron microscopy (SEM). The experimental data was proved that the properties of activated carbons depend on the final temperature of the process and duration of treatment at the final temperature.     

Synthesis and Surface Active Properties of Gemini Cationic Surfactants and Interaction with Anionic Azo Dye (AR52)

A homologous series of new gemini cationic surfactants were synthesized and characterized using micro elemental analysis, FTIR, ¹H-NMR and mass spectra. The surface activities of these amphiphiles were determined based on the data of surface tension. Critical micelle concentration, effectiveness of the surface tension reduction, efficiency of adsorption, maximum surface excess, minimum surface area and critical packing parameter were evaluated. The effect of cationic micelles on solubilization of anionic azo dye, sulforhodamine B (Acid Red 52) in aqueous micellar solution of the synthesized gemini cationic surfactants was studied at pH 6.9 ± 0.5 and 25 °C. The results showed that the solubility of dye rose with increasing surfactant concentration as a consequence of some association between the dye and the micelles. It was also observed that the aggregation of surfactant and dye takes place at a surfactant concentration below the CMC of the individual surfactant. The partition coefficients between the bulk water and surfactant micelles as well as the Gibbs energies of distribution of dye between the bulk water and surfactant micelles were calculated using a pseudo-phase model. The effect of the hydrophobic chain length of Gemini cationic surfactants on the distribution parameters was also reported. The results show favorable solubilization of dye in cationic micelles.     

A new low band gap electrochromic polymer containing 2,5-bis-dithienyl-1H-pyrrole and 2,1,3-benzoselenadiazole moiety with high contrast ratio

A new low band gap electrochromic polymer containing of 3-(2,5-di-2-thienyl-1H-pyrrol-1-yl)-9-ethyl-9H-carbazole (SNSC) and 2,1,3-benzoselenadiazole (BSe) moiety has been reported. Structural identification of initial compounds and product were carried out by using FT-IR and ¹H NMR spectroscopy results. The resulting polymer, poly(SNSC-BSe), was completely soluble in various common organic solvents and its weight-average molecular weight (M_w) were 9420 (PDI: 1.22). According to AFM results, the RMS (root mean surface) roughness of poly-(SNSC-BSe) was found to be 48.6 nm. Besides, the thermogravimetric analysis presented that the poly(SNSC-BSe) is moderately stable against to thermal effect with the initial degradation temperature at 182 °C. The lowest energy transition band maxima of poly(SNSC-BSe) was 498 nm in thin film and the optical band gap calculated from the onset wavelength of the optical absorption was 1.77 eV. On the other hand, the electrochemical band gap calculated from oxidation and reduction onset values was 1.60 eV, respectively. Finally, the electrochromic performance of the polymer film represents a high contrast ratio in the NIR region (51%), fast response time of about 1 s, high coloration efficiency (274 cm² C⁻¹) and retained its performance by 94.6% even after 1000 cycles.     

Preparation and characterization of crednerite glass–ceramics in the MnO·CuO·SiO2 system

Nanoscale crednerite (CuMnO₂) was prepared in the system MnO·CuO·SiO₂, using glass–ceramics technique for the first time. Based on obtained data from differential thermal analysis (DTA), the prepared samples were heat-treated at 700 and 800 °C for 2 h. The presence of crystalline phases after and before heat treatment was investigated by X-ray diffraction analysis. Crystallization of crednerite (CuMnO₂), manganese silicate (Mn₂SiO₄) and traces of cuprite (Cu₂O) and cristobalite (SiO₂) phases were recognized. Transmission electron microscopy showed nanoscale crystals in the range 5–10 nm. The prepared glass–ceramics showed ferrimagnetic properties with wide range coercivity from 53 to 2217 Hci and magnetization saturation from 0.21708 to 1.2 emu/g. From IR reflection data; the reflection intensity of the light is high in the range of orange–red color and violet–blue colors and low in the range of green color.     

A Systematic Study of Mixed Surfactant Solutions of a Cationic Ester-Bonded Dimeric Surfactant with Cationic, Anionic and Nonionic Monomeric Surfactants in Aqueous Media

A novel cationic biodegradable dimeric (gemini) surfactant, ethane-1,2-diyl bis(N,N-dimethyl-N-hexadecylammoniumacetoxy) dichloride (16-E2-16), containing an ester-linked spacer was synthesized. Its pure and mixed micellization properties with monomeric surfactants cetyl trimethyl ammonium chloride, cetyl pyridinium chloride, sodium dodecyl sulfate, sodium dodecyl benzene sulfonate, cetyl alcohol ethoxylate (20EO) and tert-octylphenol ethoxylate (9.5EO) were investigated by surface tension measurements at 30 °C. The critical micelle concentration (CMC) of 16-E2-16 is well below that of cetyl trimethyl ammonium chloride containing the same number of carbon atoms in the hydrophobic tail per polar head. At different mole fractions of the gemini surfactant, the CMCs of the gemini-conventional binary mixtures were determined and were found to be less than the ideal CMC values in all the cases indicating synergistic interactions. Aggregation number and Stern–Volmer constant, obtained by the fluorescence quenching technique, also support the synergistic behavior of the surfactant systems.     

Acetanilide-loaded injectable hydrogels with enhanced bioactivity and biocompatibility for potential treatment of periodontitis

Chronic periodontitis poses long-term challenges in dentistry, requiring the development of innovative dental composites with biocompatibility, bone regeneration, and antibacterial properties. This study focuses on synthesis of novel injectable thermoresponsive hydrogels composed of chitosan, sodium bicarbonate, bioactive glass (20 and 40% w/w), and acetanilide drug (0.3 and 0.6% w/w). These hydrogels exhibit a sol–gel transition at 37°C, addressing periodontal challenges with reduced gelation time. The smooth flow characteristic was evaluated through 17-22 gauge syringe needles at low temperature. Rheological studies demonstrated pseudoplastic behavior, with viscosity decreasing as shear rate increases. Fourier transform infrared and x-ray diffraction analysis confirmed the bioactivity of hydrogels, forming a bone-like apatite layer in simulated body fluid. The drug-loaded hydrogels demonstrated promising in vitro antibacterial properties against dental pathogens, specifically Staphylococcus aureus and Pseudomonas aeruginosa. Drug dissolution analysis revealed relatively high release rate at 37°C, highlighting its role in rapidly eliminating bacterial colonies at the target site, while the subsequent sustained release contributes to the prevention of infection recurrence. Finally, biocompatibility was assessed with fibroblast, where the cells were observed anchoring into the polymeric chains of hydrogel through extended filopodia.