Side chain functional carbazole-fluorene electroactive polymers: Optical,electrochemical properties,antimicrobial activity and thin film morphologies

A new electroactive polymer based on fluorene and carbazole moieties with double bond side chain (MP25) was synthesized and then double bond at the side chain was functionalized with  COOH and  Si(OEt)₃ as ITO/glass compatible groups. Electrochemical and optical properties of the polymers were elucidated with cyclic voltammetry (CV), ultraviolet–visible absorption (UV–Vis), and photoluminescence (PL) spectroscopy. It was observed that all polymers absorbed only the UV region and emitted blue light. By using CV, HOMO values were found as approximately 5.45 eV. According to AFM results, when the rough MP25 polymer thin film was modified with ITO/glass compatible groups, more uniform and smoother polymer thin films were obtained. Thermogravimetry analyses (TGA) shown that the MP25-Si and MP25-COOH were stable against thermo-oxidative decomposition. The weight loss of MP-25-Si was found to be only %23 at 700°C. Additionally, antimicrobial activity of MP25 polymers was also investigated. According to test results, all polymers were found to have antimicrobial activity against C.albicans.     

Theoretical study of corrosion inhibition of amides and thiosemicarbazones

An examination of quantum chemical and corrosion inhibition studies were carried out to investigate whether any clear links exist between the results of quantum chemical calculations and the experimental efficiencies of urea (U), thiourea (TU), acetamide (A), thioacetamide (TA), semicarbazide (SC), thiosemicarbazide (TSC), methoxybenzaldehydethiosemicarbazone (MBTSC), 2-acetylpyridine-(4phenyl) thiosemicarbazone (2AP4PTSC), 2-acetylpyridine-(4-methyl) thiosemicarbazone (2AP4MTSC), benzointhiosemicarbazone (BZOTSC) and benzilthiosemicarbazone (BZITSC) being corrosion inhibitors. The quantum chemical calculations have been performed by using DFT, ab-initio molecular orbital and semi-empirical methods for some amides and thiosemicarbozone derivatives being corrosion inhibitors. The highest occupied molecular orbital energy (E_HOMO), lowest unoccupied molecular orbital energy (E_LUMO), the energy gap between E_HOMO and E_LUMO (ΔE_HOMO-LUMO), dipole moments (μ), charges on the C, O, N, S atoms, the total energies of the molecules and the polarizabilities 〈α〉, the coefficients of the development of the MO over the atomic orbital (AO) corresponding to the between atoms which a new bond is established have been calculated.The results of quantum chemical calculations and experimental efficiencies of inhibitors were subjected to correlation analysis. We have reached the conclusion that the synthesis of better corrosion inhibitors can be achieved by controlling all electronic properties and parameters of a selected group of molecules.     

Synthesis and characterization of some soluble conducting polyazomethine polymers

Conducting crystalline polyazomethine polymers with high solubility and low melting points have been prepared and studied. The polymers were synthesized by the polycondensation of p-phenylene diamine and 2-nitro-p-phenylene diamine with terephthaldehyde and p-diacetylbenzene. Polymers with polar functional NO₂ groups and methyl side groups were found to be more soluble in common organic solvents and to possess lower melting points. The polymers were studied using IR and UV–visible spectra, elemental analyses, solubility, inherent viscosity, X-ray diffraction, scanning electron microscopy and d.c. electrical conductivity. ©1997 SCI     

紫外可见光谱区分光光度计的标准化

紫外可见光谱测量通常用于实验室的定性和定量分析。为确保测量值可靠,实验仪器必须经过校准。埃及国家标准化所建立了一种光度测定法,其吸收和传输能力满足国际和国家要求。本文介绍了紫外可见光谱测及测量仪,讨论了影响测量可靠性的因素,并讨论了包含相关测量参数的不确定度模型。     

A conducting composite of polythiophene: synthesis and characterization

Conducting polymer composites of polythiophene, using a polyamide as the insulating matrix, were prepared via electrochemical methods. The characterization of the composite was done by scanning electron microscopy, differential scanning calorimetry, thermogravimetric analysis, Fourier transform infrared and pyrolysis studies. The conductivities were measured by a four-probe technique. The cited methods revealed that the composites have properties different from those of simple mechanical mixtures of the two polymers.     

A new conducting polymer of 2,5-bis(2-thienyl)-1H-(pyrrole) (SNS) containing carbazole subunit: Electrochemical, optical and electrochromic properties

We report here the synthesis of a new electroactive monomer 3,6-di-tert-butyl-[4-(2,5-di-2-thienyl-1H-pyrrol-1-yl)phenyl]-9H-carbazole in five steps and polymerization of this monomer by two different procceses: Kumada Coupling and electro-oxidative. The product obtained by chemical polymerization exhibits a high thermal stability and narrow molecular weight distribution. While, in the UV–vis absorption spectrum of monomer the absorption peaks appear at 338 nm, the chemically synthesized polymer absorbs at 428 nm with 90 nm red shift. Cyclic voltammogram of monomer shows two separate oxidation processes which reflect the first oxidation at +0.84 V and a second one at +1.43 V. When the polymeric film prepared by electrochemical process was subjected to a repeated cyclic scan between −0.2 V and +1.0 V, it switches among three different colors (orange, green and blue). The oxidation and reduction response times were calculated as 2.0 s for this polymer film and exhibits high redox stability. The results anticipate that this kind of polymers can be used for designing electrochromics based on the use of one molecule for the generation of three basic colors (RGB).     

Integrated design of supply chain networks with three echelons, multiple commodities and technology selection

We consider a strategic supply chain design problem with three echelons, multiple commodities and technology selection. We model the problem as a tri-echelon, capacitated facility location problem that decides on the location of plants and warehouses, their capacity and technology planning, the assignment of commodities to plants and the flow of commodities to warehouses and customer zones. We use a mixed-integer programming formulation strengthened by valid but redundant constraints and apply Lagrangean relaxation to decompose the problem by echelon. Lagrangean relaxation provides a lower bound that is calculated using an interior-point cutting plane method. Feasible solutions are generated using a primal heuristic that uses the solution of the subproblems. Unlike common practice in the literature, the decomposition does not aim at getting easy subproblems, but rather at getting subproblems that preserve most of the characteristics of the original problem. Not only does this provide a sharp lower bound but also leads to a simple and efficient primal heuristic. We can afford to have relatively difficult subproblems because the interior-point cutting plane method used to solve the Lagrangean dual makes clever and selective choices of the Lagrangean multipliers leading to fewer calls to the subproblems. Computational results indicate the efficiency of the approach in providing a sharp bound and in generating feasible solutions that are of high quality.     

Major Trends in Groundwater Development: Opportunities for Public-Private Partnership?

Provision of sufficient water of good quality under growing water demands and increasing climate variability will be one of the main concerns for water managers in the coming decades. It is generally accepted that an integrated approach is required in which resource development options and demand management go hand in hand to provide a management structure with balances between immediate demand from different user groups and the short- and long-term environmental functions of our global water resources. Groundwater plays an important role in achieving this goal provided that its interaction with surface water is fully recognized and its function is fully integrated in land and water planning. The success of integrated water resources management will also benefit from a broader partnership in planning, development and management of our water resources. The focal role of central government is gradually complemented with a growing responsibility of lower levels in the public sector and broader partnerships with the private sector. This paper describes the comparative characteristics of groundwater and its functions in integrated water resources management. Some major trends are discussed in the use of aquifers for enhancing the role of groundwater to cope with increasing water demands and changes in climate variability: the use of brackish groundwater; and the enhancement of recharge and subsurface storage and the ability of aquifers to ameliorate water quality. These potential developments offer good opportunities to enhance the role of the private sector under the regulatory control of the government. These options are particularly important for the Middle East and North Africa region as coping strategies to alleviate the present water scarcity.     

Synthesis,characterization, mesomorphic and electrical properties of tetrakis(alkylthio)-substituted lutetium(III) bisphthalocyanines

The synthesis of new lutetium(III) bisphthalocyanines substituted with alkylthio groups (1–5) is described. These compounds (Pc₂Lu) are soluble in most common organic solvents and have been fully characterized (elemental analysis, FT-IR, UV–Vis spectroscopy, mass spectrometry). The thermal stabilities of the Pc compounds were determined by thermogravimetric analysis (TGA). The mesogenic properties of these new materials forming columnar-hexagonal (Col_h) mesophases were studied by differential scanning calorimetry (DSC), optical microscopy and X-ray diffraction. The compounds 2–5 exhibit a double clearing point. DC electrical properties of these compounds in different phases were determined by measuring I–V characteristics and dark current of their thin films on interdigital electrodes. The measurements were carried out in ambient air, in vacuum and in high purity nitrogen (N₂) flow in the temperature range between 300 and 420 K. Dark current measurements obtained in the crystal, liquid crystal (LC) and isotropic liquid phases were in agreement with the phase transitions of these compounds obtained by DSC and optical microscopy results. The relation between the phase transition and conductivity of the Pc₂Lu derivatives were investigated. Also, the influence of the nature of the substituted group (alkylthia and alkoxy) upon the DC electrical properties of the Pc₂Lu derivatives was investigated. The DC conductivities and the thermal activation energies depending on alkyl chain lengths of these compounds were found to be in the range of 10^?8 to 10^?5 S/cm and 0.12–0.38 eV in solid phase.     

Mucoadhesive delivery systems. II. Formulation and in-vitro/in-vivo evaluation of buccal mucoadhesive tablets containing water-soluble drugs

From the previous work (Part I), mucoadhesive formulae containing 5% CP/65% HPMC/30% lactose and 2% PC/68% HPMC/30% mannitol as well as formulae based on sodium carboxymethyl cellulose (SCMC) were selected. Medicated tablets were prepared using diltiazem hydrochloride (DZ) and metclopramide hydrochloride (MP) in two different doses (30 and 60 mg). The effect of drug and dose on the mucoadhesive properties and in-vitro drug release was evaluated. All formulae produced extended drug release (over 8 to 12 h). Polyacrylic acid based matrices (PAA) showed Fickian's diffusion release pattern for both drugs. SCMC ensured zero-order release for DZ, which deviated to anomalous behavior in case of MP. Doubling the dose significantly reduced the bioadhesion strength (p<0.05) with a slight improvement in drug release rate. The formulation of bilayer tablets containing drug-free layer and medicated layer enhanced the drug release without affecting the bioadhesive performance. The bilayer tablet formulated with 2% PC/68% HPMC/30% mannitol (PC2) was selected for studying the in-vivo metoclopramide release in four healthy volunteers. The tablet ensured controlled drug release for 12 h, in addition, good correlation (r=0.9398) was observed between in-vitro and in-vivo data. The effect of ageing on selected formulae containing DZ and MP, respectively, was studied. Storage at 40 degrees C and 75% relative humidity for 6 months didn't influence the mucoadhesive performance, however, an enhanced released rate was observed.