High surface area LaNiO<Subscript>3</Subscript> electrodes for oxygen electrocatalysis in alkaline media

LaNiO₃ coatings on nickel-foam supports were prepared by brush painting. The electrochemical properties were investigated by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Comparative studies were performed with LaNiO₃-pelleted electrodes. The roughness factors were determined by CV and found to be 5,208 ± 350 and 4,037 ± 250 for the pelleted and coated electrodes, respectively. EIS measurements confirm the results obtained by CV. Values lower than 0.3 were calculated for the morphology factors for both electrodes, indicating low electrochemical porosity. The experimental method used in this work to synthesise the oxide coupled with the use of Ni foam as support has proved to be very effective in producing oxide electrodes with surface areas higher than those referred to in relevant literature.     

Dense bulk silicon oxycarbide glasses obtained by spark plasma sintering

Dense silicon oxycarbide glasses (SiOC) have been produced by spark plasma sintering (SPS) of SiOC powders. Raw powders were obtained by pyrolysis under nitrogen at 1100 °C of tetraethylorthosilcate/polydimethylsiloxane (TEOS/PDMS) hybrids. SPS experiments were carried out at 1300 and 1500 °C at 10 and 80 MPa and then were studied by chemical analysis, ²⁹Si and ¹³C MAS NMR, ATR, Raman, XRD, FE-SEM, density, porosity, microhardness (H_v) and thermal conductivity (K). The SiOC materials are formed by Si_xOC_4?x units within a silica matrix where silicon carbide and graphite nanodomains are also present. After the SPS treatment the silicon carbide crystallite size is close to 2.5 nm. At 1300 °C and 1500 °C the carbon nanodomain size is close to 3 nm and 2 nm, respectively. H_v values vary from 3.4 to 9.15 GPa, for 30% and 1% of porosity, respectively. Finally, K is always close to 1.38 W m^?1 K^?1.     

New insights into the functionalization of multi-walled carbon nanotubes with aniline derivatives

Multi-walled carbon nanotubes (MWCNT) were functionalized with a variety of chemical groups by reaction of p-substituted anilines (R–Ph–NH₂) in the presence and absence of isopentyl nitrite used for the in situ generation of diazonium species. All materials were characterized by X-ray photoelectron spectroscopy, thermogravimetry and infrared spectroscopy.In the presence of isopentyl nitrite, the extent of functionalization was high and nearly independent on the amount of isopentyl nitrite and on the aniline substituents (R = F, Cl, I, NH₂, NO₂, OH, COOH, COOEt and Et). Unexpectedly, the functionalization of MWCNT with anilines bearing electron withdrawing groups was also observed in the absence of isopentyl nitrite. In the case of OH–Ph–NH₂, the reaction leads to MWCNT with the highest degree of functionalization and this can be considered as a new and efficient methodology for CNT functionalization with phenol groups. The overall reaction mechanism is discussed for both reaction conditions: confirmation of a radical chain mechanism was obtained for the reaction performed in the presence of isopentyl nitrite, while the formation of stabilized dipolar intermediate species seems to be involved in the absence of isopentyl nitrite. The materials with the highest degree of functionalization showed very good dispersions in acetonitrile even after 1 month.     

Microencapsulation of cashew apple (Anacardium occidentale,L.) juice using a new chitosan–commercial bovine whey protein isolate system in spray drying

The aim of this work was to obtain a new stable food product from cashew apple juice encapsulated by spray-drying technique using chitosan–whey protein isolate systems. The materials were evaluated according to their physicochemical stability during storage at different conditions and characterized with respect to their particle size distribution and structure. Encapsulated commercial and natural juices showed homogenous and unimodal particle size distribution with diameters ranging from 0.2 to 5.0 μm and from 0.2 to 40.0 μm, respectively. Both juices demonstrated higher physicochemical stability for vitamin C and color measurements than their respective non-encapsulated juices. X-ray diffractograms evidenced that the powder juices after the 140th day of storage were still in amorphous state. These results indicate that the new product was effective in protecting sensitive compounds present in the food matrix and it was also able to remain stable throughout the study period.     

Development of a new ion-imprinted polymer (IIP) with Cd2+ ions based on divinylbenzene copolymers containing amidoxime groups

Polymer Bulletin - In this study, we synthesized a new ion-imprinted polymer (IIP) based on introduction of amidoxime groups in acrylonitrile, complexation with Cd2+ ions and polymerization with...     

Resistance variation of conductive ink applied by the screen printing technique on different substrates

This research study focuses on the application of conductive ink by the screen printing technique to evaluate the potential of creating printed electrodes and to investigate the effect of washing upon electrical resistance and flexibility. Two conductive inks were applied by a conventional screen printing method on four different textile substrates, 100% cotton, 50%/50% cotton/polyester, 100% polyester and 100% polyamide. The inks were also applied on a multifibre fabric. Atmospheric plasma treatment was applied to improve the adhesion to the samples, and the resistance values were compared with those of non‐treated samples. The values were measured before and after cleaning and washing tests, which were performed to simulate domestic treatment for garments to predict the behaviour of the inks after normal usage of the fabrics. Comfort properties like stiffness of the fabrics were also evaluated after five and 10 washing cycles. It was observed that PE 825 ink forms a thicker film on the fabric surface, contributing to the loss of flexibility of the textile. However, PE 825 ink also produced the best results in terms of durability and lower values of resistance. Polyamide fabrics lost their conductive property after five washing cycles due to weak bonding between the ink and the fibres, whereas cotton fibres provided the best results.     

Kinetics of Soybean Oil Hydrolysis on Niobium Catalysts

The catalytic hydrolysis of soybean oil was used as an alternative for the production of monoglycerides (MG) and diglycerides (DG). The reactions were conducted in a stainless-steel tubular reactor in the temperature range of 240–290 °C, on niobium phosphate (NBP) and niobium oxide (NBO) as catalysts. In the hydrolysis reactions at 270 °C, the maximum selectivities of the products of interest were obtained at 22 % MG and 48 % DG for the reaction with NBP, and 7 % MG and 33 % DG with NBO, for 59 % and 36 % of triglyceride conversion in 10 min, respectively. The proposed kinetic model presented a good fit of the theoretical model with the experimental data, showing that the previous hypotheses considered for the mechanism development are suitable for describing the kinetics of soybean oil hydrolysis.     

Extracellular Vesicles in CNS Developmental Disorders

The central nervous system (CNS) is the most complex structure in the body, consisting of multiple cell types with distinct morphology and function. Development of the neuronal circuit and its function rely on a continuous crosstalk between neurons and non-neural cells. It has been widely accepted that extracellular vesicles (EVs), mainly exosomes, are effective entities responsible for intercellular CNS communication. They contain membrane and cytoplasmic proteins, lipids, non-coding RNAs, microRNAs and mRNAs. Their cargo modulates gene and protein expression in recipient cells. Several lines of evidence indicate that EVs play a role in modifying signal transduction with subsequent physiological changes in neurogenesis, gliogenesis, synaptogenesis and network circuit formation and activity, as well as synaptic pruning and myelination. Several studies demonstrate that neural and non-neural EVs play an important role in physiological and pathological neurodevelopment. The present review discusses the role of EVs in various neurodevelopmental disorders and the prospects of using EVs as disease biomarkers and therapeutics.     

Update on the pharmacology of Spirulina (Arthrospira), an unconventional food

Spirulina (Arthrospira), a filamentous, unicellular alga, is a cyanobacterium grown in certain countries as food for human and animal consumption. It is also used to derive additives in pharmaceuticals and foods. This alga is a rich source of proteins, vitamins, amino acids, minerals, and other nutrients. Its main use, therefore, is as a food supplement. Over the last few years, however, it has been found to have many additional pharmacological properties. Thus, it has been experimentally proven, in vivo and in vitro that it is effective to treat certain allergies, anemia, cancer, hepatotoxicity, viral and cardiovascular diseases, hyperglycemia, hyperlipidemia, immunodeficiency, and inflammatory processes, among others. Several of these activities are attributed to Spirulina itself or to some of its components including fatty acids omega-3 or omega-6, beta-carotene, alpha-tocopherol, phycocyanin, phenol compounds, and a recently isolated complex, Ca-Spirulan (Ca-SP). This paper aims to update and critically review the results published over the last few years with regards to these properties. The conclusion is that even if this cyanobacterium has been one of the most extensively studied from the chemical, pharmacological and toxicological points of view, it is still necessary to expand the research in order to have more consistent data for its possible use in human beings.