Fluorimetric methods for the measurement of intermediate metabolites (lactate,pyruvate, alanine, β-hydroxybutyrate,glycerol) using a COBAS FARA centrifugal analyser

Intermediate products of the metabolism of glucose, fat and amino-acid are important in the evaluation of such metabolic disorders as diabetes mellitus, liver disease and metabolic acidosis. In the present study, methods for the measurement of intermediate metabolites (lactate, pyruvate, alanine, β-hydroxybutyrate and glycerol) have been adapted to a fast centrifugal analyzer: the COBAS FARA. Correlation coeffcients rangedfrom 0.90 to 0.99, compared to established manual spectrophotometric methods. Within-run coeffcients of variation (CVs) ranged between 2.9 and 8.8% at low levels, between 1.5 and 5.7% at medium levels and between 1.2 and 5.6% at high levels. Between-run CVs were between 4.0 and 15.0% at low levels, between 1.7 and 7.0% at medium levels and between 1.3 and 2.7% at high levels. These fluorimetric assays for the determination of intermediate metabolites on COBAS FARA (Roche) have a good sensitivity and precision, are less costly than manual methods and can be used on a routine basis.     

Primary traits of Eysenck's P-E-N system: three- and five-factor solutions

The Eysenck Personality Profiler (EPP), a set of 21 scales measuring primary traits hypothesized to be definers of Neuroticism, Extraversion, and Psychoticism factors, was administered to 229 adults together with the Eysenck Personality Questionnaire--Revised (H. J. Eysenck & S. B. G. Eysenck, 1991) and the Revised NEO Personality Inventory (NEO-PI-R; P. T. Costa & R. R. McCrae, 1992b). Correlations of EPP scales with NEO-PI-R facet scales provided preliminary evidence supporting the convergent and discriminant validity of the EPP scales. However, varimax and targeted validimax factor analyses suggested that some EPP scales were misclassified and that EPP scales could better be understood in terms of the 5-factor model than the intended 3-factor model.     

Protective factors in adolescent health behavior

The role of psychosocial protective factors in adolescent health-enhancing behaviors--healthy diet, regular exercise, adequate sleep, good dental hygiene, and seatbelt use--was investigated among 1,493 Hispanic, White, and Black high school students in a large, urban school district. Both proximal (health-related) and distal (conventionality-related) protective factors have significant positive relations with health-enhancing behavior and with the development of health-enhancing behavior. In addition, in cross-sectional analyses, protection was shown to moderate risk. Key proximal protective factors are value on health, perceived effects of health-compromising behavior, and parents who model health behavior. Key distal protective factors are positive orientation to school, friends who model conventional behavior, involvement in prosocial activities, and church attendance. The findings suggest the importance of individual differences on a dimension of conventionality-unconventionality. Strengthening both proximal and distal protective factors may help to promote healthful behaviors in adolescence.     

Breed group effects on milk production of Brazilian crossbred dairy cows

Lactation records (n = 2362) of 1402 crossbred cows in 22 cooperating dairy herds in southeastern Brazil were evaluated. Cows were mixtures of Zebu (Gir, Guzera, and unknown) and European breeding (mostly Holstein). Lactation milk yields were expressed as total, 3050-d, or deviated 305-d yields, either adjusted or unadjusted for days in milk (DIM). Mean DIM was 280. Arithmetic means unadjusted for DIM were 1942, 1666, and 5 kg per record. Milk yields of daughters from sires of 6/8 and 7/8 European breeds were higher than yields of daughters from sires of 5/8 European breeds when data were either adjusted or unadjusted for DIM. The differences associated with breed group of sire were only slightly reduced when records were adjusted for DIM. There was no evidence of a decline in milk yield as the fraction of European breeding of the sire increased from 6/8 to 7/8. For a given breed group of sire, whether the grandsire was purebred or crossbred had no detectable effect. These results should be useful in determining strategies for crossbreeding of dairy cows in tropical areas, particularly when crossbred sires are used.     

Carcinoma of the splenic flexure. Nosological and therapeutic contribution

Twenty-one patients undergoing colectomy for carcinoma of the splenic flexure from November 1996 throughout October 1993 were studied retrospectively. Clinical and prognostic features were compared with those of other colon cancers treated in the same period at the same Institution. No differences in symptoms at onset and stage distribution were found in the two groups. The complex removal of the cancer tissue was achieved with the resection of the major part of the transverse colon, splenic flexure, descending colon and its mesocolon. The splenic flexure cancer did not show a worse prognosis than other colon cancers.     

Authors' reply

This reply clarifies that it is possible to change the plane of cut by filtering a tomogram, if the presence of the out-of-focus images is tolerated, because the (projected) images of all the layers are superimposed on the film and any filtering will process all these images simultaneously.     

Steric stabilization of Stöber silica dispersions using organosilanes

Organosilanes of the general formula R _x Si(OR)_4–x (where R is an alkyl group and R = CH₃ or CH₂CH₃) were used to sterically stabilize hexane dispersions of submicrometre silica spheres. The dispersions were characterized according to sediment volume results. For 0.5m silica particles, the sediment density increased by more than a factor of three up to 50 to 55% of theoretical in the presence of organosilanes with 12 or more carbons in the R group. Solid-state¹³C nuclear magnetic resonance was used to characterize the powder-dispersant interaction; this technique can distinguish between carbons in the R group of the organosilane and residual organic groups in the silica. Scanning electron micrographs of filter compacts were used to further characterize the dispersions and indicated the presence of primary particles as well as small agglomerates.     

Direct-Ink-Writing of Electroactive Polymers for Sensing and Energy Storage Applications

Considering the high levels of materials used in the fields of electronics and energy storage systems, it is increasingly necessary to take into consideration environmental impact. Thus, it is important to develop devices based on environmentally friendlier materials and/or processes, such as additive manufacturing techniques. In this work, poly(vinylidene fluoride) (PVDF) and poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) are prepared by direct-ink-writing (DIW) by varying solvent evaporation temperature and fill density percentage. Different morphologies for both polymers are obtained, including dense films and porous membranes, as well as different electroactive β-phase content, thermal and mechanical properties. The dielectric constant and piezoelectric d₃₃ coefficient for dense films reaches up to 16 at 1 kHz and 4 pC N⁻¹, respectively for PVDF-HFP with a fill density of 80 and a solvent evaporation temperature of 50 °C. Porous structures are developed for battery separator membranes in lithium-ion batteries, with a highest ionic conductivity value of 3.8 mS cm⁻¹ for the PVDF-HFP sample prepared with a fill density of 100 and a solvent evaporation temperature of 25 °C, the sample showing an excellent cycling performance. It is demonstrated that electroactive films and membranes can be prepared by direct-ink writing suitable for sensors/actuators and energy storage systems.     

Global insight into microwave stoneware firing: Macro and microstructural changes

Industrial competition and environmental concerns lead to the exploration of alternative and energy-efficient technologies for ceramic materials processing. The main objective of this work was to present microwave heating as a viable option for stoneware processing. Stoneware functional properties are presented and discussed, with emphasis on impact strength, water absorption, porosity, and color. Microstructure analyses show that microwave- and gas-fired samples have higher densifications than electrically fired samples. A relevant finding for processing conditions is that microwave firing requires temperatures approximately 100°C lower than those required by conventional firing. Microwave-fired samples’ rupture energies are approximately twice (0.57 ± 0.06 (J)) those of the reference samples (0.26 ± 0.03 (J)), and their water absorptions are approximately one-half (1.5% at 1170°C and 0.8% at 1190°C) of those of the reference samples (2.0%), whereas the water absorption of electrically fired samples at 1180°C has been estimated to be 7.5%. Color analysis also evidences a shift to lower microwave firing temperatures, what is attributed to the enhanced transformations promoted by microwave heating when comparing with the transformations promoted by conventional (gas or electric) heating.